400 Watt, 5.725 - 7.10 GHz, CW traveling wave tube, periodic-permanent-magnet focused, coaxial input, waveguide output, conduction cooled. Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, and dual-stage depressed collector. Features •400 Watt • PPM Focusing •Coaxial Input •Waveguide Output •Weight: 7.5 lbs. max •Conduction Cooled • Dual Stage Collector model Frequency Power output (GHz) (min) 5.85 - 7.1 400 W 5.85 - 7.1 400 W 5.725 - 5.825 400 W VTC-6264D4 VTC-6264D2C VTC-6264D5C TYPICAL OPERATING PARAMeters MAXIMUMMINIMUM Filament Voltage:6.3 5.9 Filament Current: 1.8 1.0 Helix Voltage:9.1 8.4 Helix Current:15 --- Collector Voltage 1:.55 Ew .49 Ew Collector Current 1: 175 --- Cathode Current: 310 --- Collector Voltage 2: .35 Ew .31 Ew Collector Current 2: 310 --- Cathode Warm-up Time:--- 3 Drive Power: 10 --- Baseplate Temp: 120 --- Prime Power:--- --- Load VSWR: 1.5:1 --- TYPICALUNITS --- Vdc 1.4A 8.8 kVdc 6 mAdc .50 Ew kVdc 125 mAdc 290 mAdc .32 Ew kVdc 160 mAdc 3Minutes 6 mW 85 °C --- Watts <1.25VSWR The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone: 1(800) 414-8823. fax : (650) 856-0705 | email : [email protected] CPI0509 W, C-band helix twt series CPI | 400 4CW50,000J 400 W, C-Band Helix TWT Series