600 W, CW Helix TWT Series, 13.75 to 14.80 GHz, periodicpermanent, magnet focused, coaxial input, waveguide output, forced-air cooled. Custom configurations are also available. These variations in the performance and configuration include: mechanical configuration, electrical and RF connections, and dual-stage depressed collector. Features •600 W •13.75 - 14.80 GHz • PPM Focusing • Coaxial Input • Waveguide Output •Any Mounting Position •Weight: 21 lbs. max •Forced-Air Cooled model VTU-6396M7 Frequency (GHz) 13.75 - 14.80 Power output (min) 600 W TYPICAL OPERATING PARAMeters MAXIMUMMINIMUM Heater Voltage: 6.4 6.2 Heater Surge Current: 5.0 --- Helix Voltage: 12.8 11.4 Helix Current: 18 --- Collector Voltage 6.95 5.15 Collector Current --- --- Cathode Current: 470 --- Cathode Warm-up Time:--- 3.0 Drive Power: 30 --- Collector Thermostat Temp: 150 --- Prime Power: --- --- Load VSWR: 1.7:1 --- Air Flow:--- 450 TYPICALUNITS --- V ---A --- kVdc --- mAdc --- kVdc --- mAdc --- mAdc ---Minutes --- mW --- °C --- Watts --- VSWR --- lb/hr The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products, visit our website at: www.cpii.com, or contact: CPI MPP Division, 607 Hansen Way, Palo Alto, CA 94303 telephone: 1(800) 414-8823. fax : (650) 856-0705 | email : [email protected] CPI 07/10 CPI Ku-band helix twt series CPI 600W, | 4CW50,000J 600 W, Ku-Band Helix TWT Series