ED Series • AC output Solid State Relay in an Industry standard EMR plug in package • Ratings of 3 & 5 Amps • Load voltage range of 24-280VAC • Fits standard DIN rail & PCB mountable sockets • LED input status indicator • AC or DC control • cUL Recognized, IEC Rated, CE & RoHS Compliant • Horsepower Rated PRODUCT SELECTION Description 3-15 VDC Control 18-32 VDC Control 48-72 VDC Control 18-36 VAC Control 90-140 VAC Control 3A 5A ED24D3 ED24C3 ED24F3 ED24D5 ED24C5 ED24F5 ED24E5 ED24B5 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS AC Output (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Resistive Load Current UL 508/ IEC 62314 LC-A [Arms, FLA] (2) Minimum Load Current [Arms] Maximum Off-State Leakage Current @ Rated Voltage [mArms] Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) Maximum On-State Voltage Drop @ Rated Current [Vpk] Maximum Surge Current (50/60 Hz, 1 cycle) [Apk] Maximum I²t for Fusing (50/60 HZ, 1/2 cycle) [A² sec] UL 508 HP/IEC 62314 LC-B Rating @ 240V, 40°C [HP/KW] Minimum Power Factor (with Maximum Load) 3A 5A 24-280 600 3 0.15 0.1 500 1.1 240/250 285/260 0.25 / 0.37 0.5 24-280 600 5 0.15 0.1 500 1.1 600/625 1780/1620 0.5 / 0.55 0.5 INPUT SPECIFICATIONS (1) Description ED24Dx ED24Cx ED24Fx ED24Ex ED24Bx Control Voltage Range Minimum Turn-On Voltage Minimum Turn-Off Voltage Maximum Reverse Voltage Minimum Input Current [mA] Maximum Input Current [mA] Nominal Input Impedance [ohms] Maximum Turn-On Time [msec] (4) Maximum Turn-Off Time [msec] 3-15 VDC 3 VDC 1.9 VDC 6 VDC 3.8 33.8 500 8.33 8.33 18-32 VDC 18 VDC 10.5 VDC 6 VDC 3.8 6.9 4.8K 8.33 8.33 48-72 VDC 48 VDC 24 VDC 6 VDC 3.8 5.8 12.5K 8.33 8.33 18-36 VAC 18 VAC 10 VAC N/A 3.8 8.5 4.5K 20 30 90-140 VAC 90 VAC 48 VAC N/A 3.2 4.9 28K 20 30 GENERAL SPECIFICATIONS (1) Description Dielectric Strength, Input/Output (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range Ambient Storage Temperature Range Weight (typical) Maximum Humidity Housing Material Terminals Material Parameters 3750 Vrms 109 Ohms 10 pF -30ºC to 80ºC -40ºC to 125ºC 1.06 oz. (30 g) 85% non-condensing Polyamide Class V0 (UL94) Copper w/Sulfamet Nickel finish GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Based on 17mm (5A model) and 13mm (3A model) spacing minimum between parts. 3) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 4) Turn-On time for Random turn-on versions is 0.1ms for DC control and 5ms for AC control. MECHANICAL SPECIFICATIONS WIRING DIAGRAM THERMAL DERATE INFORMATION AGENCY APPROVALS IEC 61000-4-2 : Electrostatic Discharge IEC 61000-4-4 : Electrically Fast Transients IEC 61000-4-5 : Electrical Surges Level 3 – Criteria A Level 3 – Criteria B Level 3 – Criteria A E374474 Rev 051211 ACCESSORIES