CYSTEKEC MTP2303N3

Spec. No. : C426N3
Issued Date : 2008.03.24
Revised Date :
Page No. : 1/8
CYStech Electronics Corp.
P-CHANNEL Enhancement Mode MOSFET
MTP2303N3
Description
The MTP2303N3 is a P-channel enhancement-mode MOSFET, providing the designer with the best
combination of fast switching, ruggedized device design, low on-resistance and cost effectiveness.
Features
• VDS=-30V
RDS(ON)[email protected]=-10V, IDS=-1.7A
• Advanced trench process technology
• Super high dense cell design for extremely low on resistance
• Reliable and rugged
• Compact and low profile SOT-23 package
• Pb-free package
Applications
• Power management in Notebook Computer
• Portable equipment
• Battery powered system
Equivalent Circuit
MTP2303N3
Outline
SOT-23
D
G:Gate
S:Source
D:Drain
MTP2303N3
G
S
CYStek Product Specification
Spec. No. : C426N3
Issued Date : 2008.03.24
Revised Date :
Page No. : 2/8
CYStech Electronics Corp.
Absolute Maximum Ratings (Ta=25°C)
Parameter
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current @TA=25°C (Note 1)
Continuous Drain Current @TA=70°C (Note 1)
Pulsed Drain Current
(Note 2)
Maximum Power Dissipation
(Note 3)
Linear Derating Factor
Operating Junction and Storage Temperature Range
Symbol
VDS
VGS
ID
ID
IDM
PD
Limits
-30
±20
-1.9
-1.5
-10
1.38
0.01
-55~+150
Tj, Tstg
Unit
V
V
A
A
A
W
W/°C
°C
Note : 1. Pulse Test : Pulse Width ≤300µs, Duty Cycle≤2%
2. Pulse width limited by maximum junction temperature.
3. Surface mounted on 1 in² copper pad of FR-4 board, 270°C/W when mounted on minimum copper pad.
Thermal Performance
Parameter
Thermal Resistance, Junction-to-Ambient
Symbol
Rth,ja
Limit
90
Unit
°C/W
Note : Surface mounted on 1 in² copper pad of FR-4 board, 270°C/W when mounted on minimum copper pad.
Electrical Characteristics (Tj=25°C, unless otherwise specified)
Symbol
Static
BVDSS
ΔBVDSS/ΔTj
VGS(th)
IGSS
IDSS
*RDS(ON)
*GFS
Dynamic
Ciss
Coss
Crss
*td(ON)
*tr
*td(OFF)
*tf
*Qg
*Qgs
*Qgd
MTP2303N3
Min.
Typ.
Max.
Unit
-30
-1.0
-
-0.1
2
±100
-1
-10
240
460
-
V
V/°C
V
nA
µA
µA
-
230
130.4
40
7.6
8.2
17.5
9
6.2
1.4
0.3
-
Test Conditions
S
VGS=0, ID=-250µA
Reference to 25°C , ID=-1mA
VDS=VGS, ID=-250µA
VGS=±20V, VDS=0
VDS=-30V, VGS=0
VDS=-30V, VGS=0, Tj=70°C
ID=-1.7A, VGS=-10V
ID=-1.3A, VGS=-4.5V
VDS=-10V, ID=-1.7A
pF
VDS=-15V, VGS=0, f=1MHz
ns
VDS=-15V, ID=-1A, VGS=-10V,
RG=6Ω, RD=15Ω
nC
VDS=-15V, ID=-1.7A,
VGS=-10V
mΩ
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C426N3
Issued Date : 2008.03.24
Revised Date :
Page No. : 3/8
Electrical Characteristics (Tj=25°C, unless otherwise specified) ---Cont.
Source-Drain Diode
*VSD
*ISD
*ISM
-
-
-1.2
-1
-10
V
A
A
VGS=0V, ISD=-1.25A, Tj=25°C
VD=VG=0, VS=-1.2V
*Pulse Test : Pulse Width ≤300µs, Duty Cycle≤2%
Ordering Information
Device
MTP2303N3
Package
SOT-23
(Pb-free)
Shipping
Marking
3000 pcs / Tape & Reel
2303
Moisture Sensitivity Level : conform to JEDEC level 3
Recommended Storage Condition:
Temperature : 10~ 35 °C
Humidity : 30~ 60% RH
Characteristic Curves
MTP2303N3
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C426N3
Issued Date : 2008.03.24
Revised Date :
Page No. : 4/8
Characteristic Curves(Cont.)
MTP2303N3
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C426N3
Issued Date : 2008.03.24
Revised Date :
Page No. : 5/8
Characteristic Curves(Cont.)
MTP2303N3
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C426N3
Issued Date : 2008.03.24
Revised Date :
Page No. : 6/8
Reel Dimension
Carrier Tape Dimension
MTP2303N3
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C426N3
Issued Date : 2008.03.24
Revised Date :
Page No. : 7/8
Recommended wave soldering condition
Product
Pb-free devices
Peak Temperature
260 +0/-5 °C
Soldering Time
5 +1/-1 seconds
Recommended temperature profile for IR reflow
Profile feature
Average ramp-up rate
(Tsmax to Tp)
Preheat
−Temperature Min(TS min)
−Temperature Max(TS max)
−Time(ts min to ts max)
Time maintained above:
−Temperature (TL)
− Time (tL)
Peak Temperature(TP)
Time within 5°C of actual peak
temperature(tp)
Ramp down rate
Time 25 °C to peak temperature
Sn-Pb eutectic Assembly
Pb-free Assembly
3°C/second max.
3°C/second max.
100°C
150°C
60-120 seconds
150°C
200°C
60-180 seconds
183°C
60-150 seconds
240 +0/-5 °C
217°C
60-150 seconds
260 +0/-5 °C
10-30 seconds
20-40 seconds
6°C/second max.
6 minutes max.
6°C/second max.
8 minutes max.
Note : All temperatures refer to topside of the package, measured on the package body surface.
MTP2303N3
CYStek Product Specification
CYStech Electronics Corp.
Spec. No. : C426N3
Issued Date : 2008.03.24
Revised Date :
Page No. : 8/8
SOT-23 Dimension
Marking:
A
L
3
B
TE
2303
S
2
1
3-Lead SOT-23 Plastic
Surface Mounted Package
CYStek Package Code: N3
G
V
Style: Pin 1.Gate 2.Source 3.Drain
C
D
H
K
J
*: Typical
DIM
A
B
C
D
G
H
Inches
Min.
Max.
0.1102 0.1204
0.0472 0.0630
0.0335 0.0512
0.0118 0.0197
0.0669 0.0910
0.0005 0.0040
Millimeters
Min.
Max.
2.80
3.04
1.20
1.60
0.89
1.30
0.30
0.50
1.70
2.30
0.013
0.10
DIM
J
K
L
S
V
Inches
Min.
Max.
0.0034 0.0070
0.0128 0.0266
0.0335 0.0453
0.0830 0.1083
0.0098 0.0256
Millimeters
Min.
Max.
0.085
0.177
0.32
0.67
0.85
1.15
2.10
2.75
0.25
0.65
Notes: 1.Controlling dimension: millimeters.
2.Maximum lead thickness includes lead finish thickness, and minimum lead thickness is the minimum thickness of base material.
3.If there is any question with packing specification or packing method, please contact your local CYStek sales office.
Material:
• Lead: 42 Alloy ; solder plating
• Mold Compound: Epoxy resin family, flammability solid burning class: UL94V-0
Important Notice:
• All rights are reserved. Reproduction in whole or in part is prohibited without the prior written approval of CYStek.
• CYStek reserves the right to make changes to its products without notice.
• CYStek semiconductor products are not warranted to be suitable for use in Life-Support Applications, or systems.
• CYStek assumes no liability for any consequence of customer product design, infringement of patents, or application assistance.
MTP2303N3
CYStek Product Specification