SF11 DC COMPONENTS CO., LTD. THRU RECTIFIER SPECIALISTS R SF18 TECHNICAL SPECIFICATIONS OF SUPER FAST RECTIFIER VOLTAGE RANGE - 50 to 600 Volts CURRENT - 1.0 Ampere FEATURES * * * * * * * High reliability Low leakage Low forward voltage High current capability Super fast switching speed High surge capability Good for switching mode circuit DO-41 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Mounting position: Any Weight: 0.33 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL SF11 SF12 SF13 SF14 SF15 SF16 SF18 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 150 200 300 400 600 Volts Maximum RMS Volts V RMS 35 70 105 140 210 280 420 Volts VDC 50 100 150 200 300 400 600 Volts Maximum DC Blocking Voltage Maximum Average Forward Current at TA = 55 oC Peak Forward Surge Current I FM (surge):8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum Forward Voltage at 1.0A DC IO 1.0 Amps I FSM 30 Amps VF Maximum DC Reverse Current @T A = 25 oC at Rated DC Blocking Voltage @T A =150 o C Volts 1.7 5.0 uAmps 150 Maximum Reverse Recovery Time (Note 1) trr Typical Junction Capacitance (Note 2) CJ Operating and Storage Temperature Range 1.25 0.95 IR T J , T STG 35 nSec 15 10 pF 0 -65 to + 150 C NOTES : 1. Test Conditions: IF=0.5A, I R=1.0A, IRR=0.25A. 2. Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 40 NEXT BACK NEXT EXIT BACK RATING AND CHARACTERISTIC CURVES ( SF11 THRU SF18 ) DC COMPONENTS CO., LTD. R 41 NEXT EXIT BACK NEXT EXI BACK EXIT NEXT BACK