DIALIGHT 586-1102-005F

FEATURES / BENEFITS
586 Series
Single Chip BASED LED
RoHS Compliant
T 1 3/4 MIDGET FLANGE
No heat generated
High brightness with low current draw - uses up to 90%
less energy than incandescent
Long life - up to 100K hours
Mounts directly into industry-standard socket
Resistant to shock and vibration
AlInGaP and InGaN technology
Super bright single chip design
Colors include red, green, yellow, blue and white
Dialight's line of based LED lamps is designed to directly
replace many popular subminiature and miniature incandescent
lamps. The benefits of LED technology over incandescent are
significant: They offer long life, are shock resistant, withstand
vibration and provide energy conservation.
(Center Contact Negative)
SPECIFICATIONS
.242
[6.15]
.284
[7.2]
.558
[14.18]
Measurements are typical
Dimensions are inches [mm]
CENTER CONTACT
(-) NEGATIVE
Operating Voltages: 6, 14, and 28 VDC
Operating temperature: -40oC to +80oC
Storage temperature: -40oC to +100oC
Replaces incandescent lamp numbers: 327,
328, 330, 345,349, 350, 376, 377, 380, 381,
382, 385, 387, and 7341*
*
See Dialight’s Incandescent lamp/based LED
cross reference for a complete listing.
CONSIDERATIONS
Since lens caps act as filters for the light emitted from the based LED, it is important to match the emitting color of the
LED. If not matched properly, the overall light output may be substantially reduced. Dialight recommends using transparent lenses,
which will optimize the light output.
Although these lamps can be operated at a lower voltage, which will increase the life, the intensity will be reduced.
Operation of the based LED at a higher voltage should not exceed 10% above the recommended voltage.
Dialight does not recommend that based LED lamps be used in neon sockets.
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
MDEL586S001_A
586 Series
Single Chip BASED LED
T 1 3/4 MIDGET FLANGE
T 1 3/4 MIDGET FLANGE - POLARIZED
COLOR
PEAK
WAVELENGTH
(nm)
VOLTAGE
(VDC)
CURRENT
TYP.-(mA)
INTENSITY
TYP.-(mcd)
RoHS
COMPLIANT
586-1101-001F
Red
639
6
10
775
586-1102-001F
Green
520
6
10
600
586-1103-001F
Yellow
592
6
10
775
586-1105-001F
Blue
467
6
10
210
586-1106-001F
White
*
6
10
460
586-1101-003F
Red
639
14
10
775
586-1102-003F
Green
520
14
10
600
586-1103-003F
Yellow
592
14
10
775
586-1105-003F
Blue
467
14
10
210
586-1106-003F
White
*
14
10
460
586-1101-005F
Red
639
28
10
775
586-1102-005F
Green
520
28
10
600
586-1103-005F
Yellow
592
28
10
775
586-1105-005F
Blue
467
28
10
210
586-1106-005F
White
*
28
10
460
PART NUMBER
* Color coordinates: x = .320, y = .320
Based LE Ds SELECTION
With the technological advancements in Light Emitting Diodes (LEDs) brightness can now rival the incandescent
lamp when used in similar packages. These advancements have created a new type of product called the based
LED - an LED with the functionality of an incandescent bulb.
The following styles are currently available in red, green, yellow, blue and white:
T 1 3/4 Midget Flange
T 1 3/4 Bi-Pin
T 1 3/4 Wedge (T5)
T 2 Telephone Slide
T 3 1/4 Miniature Bayonet (BA9S)
T 3 1/4 Miniature Screw (E10)
T 3 1/4 Wedge (T10)
15mm SC Bayonet (BA15S)
Dialight’s line of based LEDs continues to grow.
Please visit our website for more information.
www.dialight.com
Dialight reserves the right to make changes at any time
in order to supply the best product possible.
Dialight Corporation
1501 Route 34 South • Farmingdale, NJ 07727 USA
Tel: (1) 732-919-3119 • Fax: (1) 732-751-5778 • www.dialight.com
MDEL586S001_A