DIALIGHT RS5C4F-G

Application:
Dialight introduces the state-of-the-art StreetSense™ LED fixtures designed
specifically for “new” and “retrofit” installations of Roadway Sign Lights.
All of Dialight’s long life LED luminaires are designed to meet the most
demanding specification criteria while offering maxiumum energy savings,
reduced maintenance costs, and a superior quality of light.
Mechanical Information:
Fixture Weight:
Mounting (see pages
2-3for specific details):
Patents Pending
Shown using Dialight's complete unit
StreetSense™ RS Series
LED Roadway Sign Light
25 lbs - Retrofit cover assembly, Holophane
25 lbs - Retrofit cover assembly, GE
32 lbs - Complete fixture
Dialight complete unit including box and cover
( 22.7" x 20.5" x 12.3")
Holophane SIGN-VUE enclosure box
( 22.7" x 20.5" x 5.5") (supplied by others)
GE VERSAFLOOD II SIGNLITER® box
(19" x 17.37" x 9") (supplied by others)
Electrical specifications:
Certifications & Ratings:
w Recommended design practice - IES RP-19-01roadway sign lighting
w Retrofit cover assemblies compliant to UL-1598 wet locations
w Complete fixture compliant to UL-1598 wet locations
w CSA 22.250
w ANSI C136.31-2001 (vibration)
w MIL STD 810F (salt / fog)
System Power Consumption
(nom +/- 10%):
63W
100W
Features & Benefits:
w Complete performance 5 year warranty
w Mercury free
Initial lumens:
4,000 (63W)
4,900 (100W)
Operating Voltage:
100-277 VAC, 50/60 Hz
347, 480VAC (consult factory)
Transient Protection:
ANSI C136.2 (600V) American National
Standard for Roadway and Area Lighting
Equipment - Luminaires, Voltage Classifications
EMI/RFI (Noise Suppression): FCC Title 47, Subpart B, Section 15, class A devices
w
w
w
w
w
>70% lumen maintenance after 60,000 operating hours
Long lasting / low maintenance
Low power consumption offers 60-70% energy savings vs. 250W MV
Superior color rendition index compared to HPS; LPS; MH; MV
Instant on/off operation - no cool down or warm up time required for
full illumination
w Resistant to roadway vibration and shock
w Universal input 100-277 VAC (480VAC verseions availble)
w Weather/corrosion resistant lamp assembly and housing
Power Factor:
> 0.90
THD (typ):
10% @ 100-240 VAC
20% @ 277 VAC
Operating Temp:
-40°F to +165°F (-40°C to +74°C)
Construction:
Body:
Polyester / epoxy powder coat gray RAL 7040
Lens:
High impact polycarbonate with UV stabilizer
and hard coated for abrasion resistance
Cover:
Polyester / epoxy powder coat gray RAL 7040
Photometric Information:
Meets Buy American
For projects requiring
Buy American certification,
consult factory for additional
information and details
Ordering Information
1
CCT:
5300K (cool white)
CRI:
< 70
All values typical unless otherwise state
Part Number
Color
Description
System Power Consumption
(nom +/- 10%)
RS5C4F-C
Cool White
Dialight Complete Fixture1
Box and cover assembly includes wiring box and light engine for mounting on a flat plate
63W
RS5C4K-C
Cool White
Dialight Complete Fixture1
Box and cover assembly includes wiring box and light engine for mounting on a flat plate
100W
RS5C4F-H
Cool White
RS5C4K-H
Cool White
RS5C4F-G
Cool White
RS5C4K-G
Cool White
Dialight Retrofit Cover Assembly (only)
For use on Holophane SIGN-VUE enclosures (see page 2 for detail)
Dialight Retrofit Cover Assembly (only)
For use on GE VERSAFLOOD II SIGNLITER® enclosures (see page 2 for detail)
63W
100W
63W
100W
All units above intended to be mounted under sign only and on a fixed plate mounting structure. Not intended to be mounted inverted on top of sign or pipe or
pole mount.
Note: Mounting Plate provided by others
www.dialight.com
Typical CCT Values
High Pressure Sodium
2100K
Incandescent
2800K
Halogen
3100K
Fluorescent (standard)
3500K
Direct Sunlight
4900K
Metal Halide
5000K
Dialight LED RS Series (Cool)
5300K
Natural Daylight
6500K
Indirect Sunlight
6700K
StreetSense™ LED Roadway Sign Light
DOTs and other agencies must now choose alternative lamp sources for the replacement of these fixtures and for new
construction or additions. Under the Federal Energy Policy Act (EPACT 2005) and the Energy Independence and Security
Act, conventional mercury vapor lamps and all 150-500 watt metal halide ballasts were mandated to be substituted
with more energy efficient alternatives.
Going GREEN
The 63 or 100W StreetSense LED fixture can typically replace a 250W or higher mercury vapor / metal halide unit while
still meeting or exceeding the Roadway Sign Light Specifications, so it delivers CO2 reduction and energy savings of
60-70% over conventional lights. This efficiency is further enhanced by its instant-on/off ability with no necessary warm
up to achieve full illumination. In addition its ‘green’ credentials are assured by the fact that it is 100% mercury free and
dark skies friendly; this is assured by its highly efficient optics that focus the light just where it’s needed, avoiding light spill.
Maintenance Free
The rugged, solid state StreetSense fixture is not only an energy efficient alternative, but its projected fixture service life of
ten years (50% on-time, >70% lumen maintenance after 60K hours) also brings other significant
benefits. These include the elimination of frequent lamp changes and reduction of overall maintenance costs as well
as reducing exposure of maintenance workers to dangerous highway traffic. For road users they deliver added safety
by producing a quality of light that is vastly superior to conventional sources and by eliminating dark road signs resulting
from burned out conventional lamps.
Ease of installation
Dialight offers fixture assemblies for new applications as well as retrofit applications. A unique LED retrofit cover assembly
kit option will adapt to most GE or Holophane boxes shown below. The retrofit involves only the removal of the existing
fixture’s cover, lamp and reflector which is then replaced with the Dialight LED cover assembly. Most of the existing wiring
connections remain untouched, so the conversion is quick, simple and easy. Thus installation time both time and money.
The Dialight LED retro-fit cover assemblies for
GE VERSAFLOOD II SIGNLITE and HOLOPHANE SIGN-VUE
GE VERSAFLOOD II SIGNLITER Typical Dimensions
HOLOPHANE SIGN-VUE Typical Dimensions
www.dialight.com
StreetSense™ RS Series LED Roadway Sign Light Mechanical Dimensions
Dialight Complete Fixtures
Dialight Part Numbers RS5C4F-C and RS5C4K-C
7.3
(186)
LED fixture angle is 104º
fixed at factory
12.3
(312)
22.7
(577)
Ø 1” NPT THREADED HOLE BOTH SIDES
Retrofit Cover Assembly for Use on Holophane SIGN-VUE® Enclosures
Dialight Part Numbers RS5C4F-H and RS5C4K-H
LED fixture angle is 104º
fixed at factory
7.3
(186)
POWER SUPPLY
GROUND STRAP
(SUPPLIED BY DIALIGHT)
(SUPPLIED BY DIALIGHT)
WIRE HARNESS (SUPPLIED BY DIALIGHT)
20.5
(521)
Retrofit cover assembly for use on GE VERSAFLOOD II SIGNLITER®
Dialight Part Numbers RS5C4F-G RS5C4K-G
7.3
(186)
LED fixture angle is 123º
fixed at factory
GROUND STRAP
POWER SUPPLY
(SUPPLIED BY DIALIGHT)
(SUPPLIED BY DIALIGHT)
WIRE HARNESS (SUPPLIED BY DIALIGHT)
20.5
(521)
Inside box of Dialight complete unit
DRILL 3/8" MOUNTING HOLES
THOUGH LOWER FIXTURE BASE.
3 PLACES.
Internal wiring
CONNECT
INCOMING WIRES
ATTACH GROUND
TERMINAL RING TO
LOWER HOUSING
MOUNT LOWER HOUSING TO
SIGN STRUCTURE MOUNTING
PLATE
HARDWARE TO MOUNT DIALIGHT
BOX TO SIGN STRUCTURE
SUPPLIED BY OTHERS
ALL INCOMMING
WIRES, POWER AND
GROUND SUPPLIED
BY OTHERS
ATTACH INCOMING
GREEN WIRE TO
GROUNDING TERMINALS
TYPICAL TO COMLETE
UNIT AND TO RETRO-FIT
COVER ASSEMBLIES
Designs shown are for reference only. Power supply shown above is for wiring purpose only. Actual PS in unit may vary.
www.dialight.com
StreetSense™ LED Roadway Sign Light
Light Measurement Data
Photometric calculations below have been simulated based on Dialight fixture IES files. Scenarios provided are given
to show projected future capabilities to meet various specifications. For accurate light output levels, a detailed
photometric layout should be provided by Dialight which will show the Dialight fixture which best meets your individual roadway sign specifications. Please email us at info@dialight.com and provide the following:
- What is the width and height of the sign to be illuminated?
- Confirm the fixture will be located on a fixed plate mounted to the sign structure below the sign face
- How many fixtures will be used to illuminate the sign?
- What is the fixtures for spacing required for each sign size?
- What is the average footcandles (cd) required on the sign?
- What is the max to min uniformity ratio required?
- What is the fixture mounting plate location relative to the bottom edge of the sign will each fixture be placed?
Example: How far out from the front of the sign face and how far down from the bottom edge of the sign?
If a retrofit installation provide all of the information below plus the following:
- What type of lamp fixture is being replaced (MH, MV, HPS)?
- Who is the manufacturer of the currently installed fixture GE or Halophane?
What is the GE or Halophane Part number
- What is the wattage or the fixture currently installed?
Some typical photometric specification scenerios using Dialight’s complete fixtures
RS5C4F-C - 63W complete fixture
RS5C4K-C - 100W complete fixture
Fixture placement out from front of
sign (ft) / Down from lower
Wattage
bottom edge or
(W)
up from top edge (ft)1
Sign
Width
(ft)
Sign
Height
(ft)
# of
Fixtures
Average lluminanace
Footcandles (FC)
Illuminance
Uniformity
max/min
8
8
1
4 ft / 1 ft
100
41.64
3.56
8
8
1
4 ft / 1 ft
63
31.5
3.98
8
8
1
6 ft / 1.5 ft
100
24.85
2.41
8
8
1
6 ft / 1.5 ft
63
18.16
2.65
10
12
2
4 ft / 1ft
100
52.97
6.97
10
12
2
4 ft / ft
63
37.50
5.92
10
12
2
4.5 ft / 1 ft
100
48.7
5.08
10
12
2
4.5 ft / 1 ft
63
34.51
3.98
10
14
2
4 ft / 1 ft
100
44.2
6.91
10
14
2
4 ft / 1 ft
63
34.37
6.03
10
14
2
4.5 ft / 1 ft
100
40.71
4.37
10
14
2
4.5 ft / 1 ft
63
32.85
4.22
10
14
2
6 ft / 1.5 ft
100
31.2
2.65
10
14
2
6 ft / 1.5 ft
63
24.4
2.67
14
14
3
4.5 ft / 1 ft
100
47.0
15.63
14
14
3
4.5 ft / 1 ft
63
36.65
14.96
14
14
3
6 ft / 1.5 ft
100
39.88
5.43
14
14
3
6 ft / 1.5 ft
63
30.33
5.22
1
Where 1 fixture is shown for the 8’ sign, placement of the fixture is on center of sign.
Where 2 fixtures are shown for the 10’ sign, placement of the fixtures is 1.5’ from left edge and 1.5’ from the right edge of the sign.
Where 3 fixtures are shown for the 14’ sign, placement is as follows: one fixture is 2” from the left edge second fixture center of sign, Third fixture is 2’ from right edge.
Dialight reserves the right to make changes at any time in order to supply the best product possible.
The most current version of this document will always be available at:
www.dialight.com/Assets/Brochures_And_Catalogs/Illumination/MDTFSL3X001.pdf
MDTSRSSTSX001_C