R1200 THRU R2000 HIGH VOLTAGE SILICON RECTIFIER Reverse Voltage - 1200 to 2000 Volts Forward Current - 0.5 Ampere FEATURES DO-41 Low cost ● Low leakage ● Low forward voltage drop ● High current capability ● 1.0 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) DIA. 0.205 (5.2) 0.160(4.1) MECHANICAL DATA Case: JEDEC DO-41 molded plastic body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.012 ounce, 0.33 grams 1.0 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) DIA. Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics @ TA = 25 C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA= 50 C Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage @ IF = 500mA Peak Reverse Leakage Current at Rated DC Blocking Voltage Typical Junction Capacitance (Note 2) Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: Symbol R1200 R1500 R1800 R2000 Unit V RRM V RWM VR 1200 1500 1800 2000 V V R(RMS) 840 1050 1260 1400 V IO 500 mA IFSM 30 A V FM 2.0 IRM JA Tj, TSTG pF 30 70 117 -65 to +150 1. Valid provided that leads are kept at ambient temperature at a distance of 9.5mm from the case. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. V A 5.0 Cj R 3.0 K/W C R1200 THRU R2000 RATINGS AND CHARACTERISTIC CURVES FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 50 PEAK FORWARD SURGE CURRENT, AMPERES Single Phase Half Wave 60Hz Resistive or Inductive Load 0.4 0.3 0.2 0.1 0 0 25 50 75 100 125 150 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 20 10 175 0 1 10 NUMBER OF CYCLES AT 60Hz o AMBIENT TEMPERATURE, C FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 0.5 1.0 0.1 o TJ = 25 C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,% 100