AUDIO PCB RIGHT ANGLED DC SOCKETS SECTION 6 Competitively priced Industry compatible PCB mounting SPECIFICATION Contact resistance (DCR 0.1A) 1, Initial, before any testing: 2, After life test with mating plug: Insertion Force: Extraction Force: Soldering Heat: Operating Temperature range: Insulating Resistance: Voltage Test: Lifetime: Rated Voltage: Rated Current: (1) Between the terminals (NC): 30mΩ (2) Plug to sleeve, tip, ring (NO) contact: 50mΩ (1) Between the terminals (NC): 60mΩ (2) Plug to sleeve, tip, ring (NO) contact: 100mΩ 0.3kg - 1.5kg Terminals must withstand a 500g minimum pull for 10 seconds 0.3kg - 1.5kg before movement or break from housing occurs Terminal for PC board temperature: 260+ 5˚C for 5 + 1.0 seconds -25˚C to 80˚C More than 100MΩ by 500v DC at 90-95% RH, 40˚C Withstand 0.5mA 500v AC between any open terminal for one minute Withstand more than 5000 cycle’s insertion and withdrawal with testing plug 16vdc 20mA - 0.3A OUTLINE DRAWING P.C.B. LAYOUT (+0.1) BOTTOM ORDERING INFORMATION DBC PJ 0202 1 Dubilier Connectors DC Jack Socket Connector Series 1 = 2.5mm Blank = 2mm 157 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758