Embedded Power for Business-Critical Continuity Rev. 9.23.09_75 DP40 of 2 DP40 40 Watts Total Power: Input Voltage: # of Outputs: 40 Watts 90 - 264 VAC 127 - 300 VDC Single Electrical Specifications Input Special Features •Medical and ITE safeties •Universal AC input •Fully regulated output •Overload and short circuit protection •Constant voltage •High efficiency •High MTBF •IEC320 AC input receptacle 3 pin (type C14) 2 pin (type C8) •Built in EMI filter (CISPR 22 Class B) •LED power good indicator •Input power < 49 watts •Complies with EN61000-3-2 •Meets Energy Star 2.0 •WEEE & CeC IV compliant •CE Mark EMC & LVD •Less than 300 mW No-Load power consumption Safety • UL • cUL • TUV • CE • CB • CCC 60950-1, 60601-1 60950-1, 60601-1 60950-1, 60601-1 EMC & LVD Certificate and report China Approval Input range: Frequency: Inrush current: Input current: Efficiency: EMI/RFI: Safety ground leakage current: 90 - 264 Vac (wide range) 127 - 300 Vdc 47 - 63 Hz < 50A @ 230 Vac, cold start @ 25 °C < 0.5 A rms @ 115 Vac; < 0.25 A @ 230 Vac 84% @ full load typical, @115 Vac FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B 300 µA @ 50/60 Hz, 264 Vac input for 3 pin model 100 µA @ 50/60 Hz, 264 Vac input for 2 pin model Output Maximum Power (Po): Hold-up time: Overvoltage protection: Overload protection: Cable/connector: 40 W 10 ms. typical at full load @ 115 Vac 20% - 45% above nominal output maximum Latching type, recycle AC to reset. Output short circuit protection auto recover Overload protected @ 110 - 160% above peak rating 1.2 m DC cable with 2.5mm I.D, 5.5 mm O.D center plug DC plug center +v DC plug outer -v Environmental Specifications Operating temperature: Storage temperature: Electromagnetic susceptibility: Humidity: Vibration: MTBF demonstrated: 0 ° to +40 °C ambient. Derate each output as 2.5% per degree from 40 °C to 60 °C. -20 °C start up -40 °C to +85 °C Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 Operating; non-condensing 10% to 90% RH Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8Hz to 500Hz, operational > 550,000 hours at full load and 25 °C ambient conditions Embedded Power for Business-Critical Continuity Americas Ordering Information Model Number Output Voltage Maximum Load Peak Load1 Regulation2 Ripple P/P (PARD)3 90 mV 90 mV 120 mV 120 mV 150 mV 150 mV 150 mV 150 mV 240 mV 240 mV 480 mV 480 mV DP4009N2M 9V 4.44 A 5.4 A ± 5% DP4009N3M 9V 4.44 A 5.4 A ± 5% DP4012N2M 12 V 3.33 A 4.4 A ± 5% DP4012N3M 12 V 3.33 A 4.4 A ± 5% DP4015N2M 15 V 2.67 A 3.5 A ± 5% DP4015N3M 15 V 2.67 A 3.5 A ± 5% DP4018N2M 18 V 2.22 A 3.0 A ± 5% DP4018N3M 18 V 2.22 A 3.0 A ± 5% DP4024N2M 24 V 1.67 A 2.3 A ± 5% DP4024N3M 24 V 1.67 A 2.3 A ± 5% DP4048N2M 48 V 0.84 A 1.2 A ± 5% DP4048N3M 48 V 0.84 A 1.2 A ± 5% 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Mechanical Drawing 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone:+1 760 930 4600 Facsimile: +1 760 930 0698 Rev. 9.23.09_75 DP40 of 2 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone:+44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone:+852 2176 3333 Facsimile: +852 2176 3888 2.4" (61.0) For global contact, visit: www.PowerConversion.com 4.88" (124.0) 48" (1219 ± 20) techsupport.embeddedpower @emerson.com 1.55" (39.5) While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power 2.4" (61.0) Connectivity DC Power 48" (1219 ± 20) 1.55" (39.5) 4.88" (124.0) Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Notes: 1.Specifications subject to change without notice. 2.All dimensions in inches (mm), tolerance is ± 0.02” (± 0.5 mm) 3.Warranty: 2 year 4.Weight: 0.55 lb./ .25 kg 5.AC input power cord sold separately. 6.Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2009 Emerson Electric Co.