146 CTI Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature, Low Impedance FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing • SMD-version with base plate, lead (Pb)-free reflow solderable • Charge and discharge proof, no peak current limitation 140 CRH 125 °C Lower Z Higher IR 146 CTI 125 °C • High temperature reflow soldering according to JEDEC J-STD-020 • Compliant to RoHS Directive 2002/95/EC Lower Z • Vibration proof, 4-pin version and 6-pin version • AEC-Q200 qualified 150 CRZ 105 °C APPLICATIONS Fig. 1 • SMD technology, for high temperature reflow soldering • Industrial and professional applications QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range VALUE 10 x 10 x 10 to 18 x 18 x 21 22 μF to 4700 μF ± 20 % 16 V to 63 V • Automotive, general industrial, telecom • Smoothing, filtering, buffering MARKING • Rated capacitance (in μF) • Rated voltage (in V) • Date code, in accordance with IEC 60062 - 55 °C to + 125 °C Endurance test at 125 °C 1000 h to 5000 h • Black mark or “-” sign indicating the cathode (the anode is identified by bevelled edges) Useful life at 125 °C 1500 h to 6000 h • Code indicating group number (T) Useful life at 40 °C 1.8 x lR applied 150 000 h to 400 000 h Shelf life at 0 V, 125 °C Based on sectional specification Climatic category IEC 60068 Document Number: 28403 Revision: 10-May-11 1000 h PACKAGING Supplied in blister tape on reel IEC 60384-18/CECC 32300 55/125/56 For technical questions, contact: [email protected] www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature, Low Impedance SELECTION CHART FOR CR, UR, AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (μF) 16 25 35 50 63 22 10 x 10 x 10 33 10 x 10 x 10 47 10 x 10 x 10 10 x 10 x 10 10 x 10 x 10 68 10 x 10 x 10 10 x 10 x 10 100 10 x 10 x 10 10 x 10 x 10 10 x 10 x 12 10 x 10 x 12 12.5 x 12.5 x 13 150 10 x 10 x 10 10 x 10 x 12 12.5 x 12.5 x 13 220 10 x 10 x 10 10 x 10 x 12 12.5 x 12.5 x 13 12.5 x 12.5 x 16 330 10 x 10 x 10 10 x 10 x 12 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 470 10 x 10 x 12 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 16 680 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 16 18 x 18 x 16 820 16 x 16 x 21 1000 12.5 x 12.5 x 16 16 x 16 x 16 16 x 16 x 16 16 x 16 x 21 18 x 18 x 21 18 x 18 x 16 1200 18 x 18 x 16 18 x 18 x 21 - 1500 16 x 16 x 16 16 x 16 x 16 16 x 16 x 21 - - 1800 18 x 18 x 21 - - 16 x 16 x 21 - - - 2200 16 x 16 x 16 18 x 18 x 16 - - - 2700 18 x 18 x 21 - - - 16 x 16 x 21 - - - - 3300 - - - - 18 x 18 x 21 - - - - 4700 18 x 18 x 21 - - - - HMAX. MAX. 0.3 HMAX. MAX. 0.3 B LMAX. L1MAX.S 35V 1000u 3R-H D WMAX. B WMAX. L1MAX. S 25V 2200u L4-H 25V 220 u A4-H D 6-pin: ≥ Ø 16 mm min. 0.4/max. 1.0 (2 x) 4-pin: Ø 12.5 mm min. 0.4/max. 1.0 (2 x) 2-pin: Ø 10 mm min. 0.4/max. 1.0 (2 x) 18 x 18 x 16 3900 HMAX. MAX. 0.3 D WMAX. B LMAX. L1MAX. S LMAX. Fig. 2 - Dimensional outline www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 28403 Revision: 10-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Aluminum Capacitors Vishay BCcomponents SMD (Chip), High Temperature, Low Impedance Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH CASE CODE LMAX. WMAX. HMAX. ØD BMAX. S L1MAX. MASS (g) 10 x 10 x 10 1010 10.5 10.5 10.5 10.0 1.0 3.5 12.1 1.3 10 x 10 x 12 1012 10.5 10.5 12.5 10.0 1.0 3.5 12.1 1.5 12.5 x 12.5 x 13 1213 12.9 12.9 14.0 12.5 1.3 3.6 14.9 2.6 12.5 x 12.5 x 16 1216 12.9 12.9 16.5 12.5 1.3 3.6 14.9 2.8 16 x 16 x 16 1616 16.6 16.6 17.5 16.0 1.3 6.5 18.6 5.5 16 x 16 x 21 1621 16.6 16.6 22.0 16.0 1.3 6.5 18.6 6.0 18 x 18 x 16 1816 19.0 19.0 17.5 18.0 1.3 6.5 21.0 8.0 18 x 18 x 21 1821 19.0 19.0 22.0 18.0 1.3 6.5 21.0 8.3 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 10 x 10 x 10 1010 16 24 11.6 380 500 10 x 10 x 12 1012 16 24 12.8 330 250 12.5 x 12.5 x 13 1213 20 24 16.2 380 250 12.5 x 12.5 x 16 1216 24 32 18.5 380 200 16 x 16 x 16 1616 28 44 18.9 380 150 16 x 16 x 21 1621 28 44 23.4 380 100 18 x 18 x 16 1816 32 44 18.9 380 125 18 x 18 x 21 1821 32 44 23.4 380 100 Note • Detailed tape dimensions see section “PACKAGING” Document Number: 28403 Revision: 10-May-11 For technical questions, contact: [email protected] www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature, Low Impedance MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and/or adjacent components. For maximum conditions refer to Fig. 4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. For recommended soldering pad dimensions, refer to Fig. 3 and Table 3. As a general principle, temperature and duration shall be the minimum necessary required to ensure good soldering connections. However, the specified maximum curves should never be exceeded. e a c a d b f b b d a c a a Case size Ø D ≤ 10 mm c a Case size Ø D ≥ 16 mm Case size Ø D = 12.5 mm Fig. 3 - Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c d e f 1010 4.4 2.5 4.0 - - - 1012 4.4 2.5 4.0 - - - 1213 6.3 2.5 4.0 4.2 5.0 5.6 1216 6.3 2.5 4.0 4.2 5.0 5.6 1616 7.8 9.6 4.7 - - - 1621 7.8 9.6 4.7 - - - 1816 8.8 9.6 4.7 - - - 1821 8.8 9.6 4.7 - - - www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 28403 Revision: 10-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Aluminum Capacitors Vishay BCcomponents SMD (Chip), High Temperature, Low Impedance ADVANCED SOLDERING PROFILE FOR LEAD (Pb)-FREE REFLOW PROCESS ACCORDING TO JEDEC J-STD-020 T (°C) TPeak 230 217 t4 t3 200 190 t2 150 t1 25 time (s) Fig. 4 - Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS for MAL214699xxxE3 CASE CODE 1010 TO 1012 CASE CODE 1213 TO 1216 CASE CODE 1616 TO 1821 Max. time from 25 °C to TPeak 300 s 300 s 300 s Min. ramp-up rate to 150 °C 3 K/s 3 K/s 3 K/s Max. time from 150 °C to 200 °C (t1) 150 s 150 s 150 s Max. time from 190 °C to 200 °C (t2) 110 s 110 s 110 s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s Max. time above TLiquidus (217 °C) (t3) 90 s 90 s 90 s Max. time above 230 °C (t4) 70 s 65 s 60 s 260 °C 250 °C 245 °C 40 s 30 s 30 s 3 K/s to 6 K/s 3 K/s to 6 K/s 3 K/s to 6 K/s PROFILE FEATURES Ramp up rate from 200 °C to TPeak Peak temperature TPeak Max. time above TPeak minus 5 °C Ramp-down rate from TLiquidus Notes • Temperature measuring point on top of the case and on terminals. • Max. 2 runs with pause of min. 30 min in between. Document Number: 28403 Revision: 10-May-11 For technical questions, contact: [email protected] www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature, Low Impedance ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 146 CTI series DESCRIPTION CR Rated capacitance at 100 Hz, tolerance ± 20 % IR Rated RMS ripple current at 100 kHz, 125 °C IL2 Max. leakage current after 2 min at UR tan Max. dissipation factor at 100 Hz Z Max. impedance at 100 kHz 220 μF/50 V; ± 20 % Nominal case size: 12.5 mm x 12.5 mm x 13 mm; taped on reel Ordering code: MAL214699106E3 Note • Unless otherwise specified, all electrical values in Table 5 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % Table 5 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 16 25 35 www.vishay.com 6 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 125 °C 100 kHz (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz 20 °C () Z 100 kHz - 40 °C () ORDERING CODE MAL2146... 330 10 x 10 x 10 750 53 0.16 0.150 1.35 99501E3 470 10 x 10 x 12 900 75 0.16 0.097 0.87 99502E3 680 12.5 x 12.5 x 13 1100 109 0.16 0.075 0.68 99503E3 1000 12.5 x 12.5 x 16 1300 160 0.16 0.058 0.52 99504E3 1500 16 x 16 x 16 1400 240 0.16 0.050 0.45 99505E3 2200 16 x 16 x 16 1400 352 0.18 0.050 0.45 99506E3 3300 16 x 16 x 21 1660 528 0.20 0.035 0.32 99507E3 3300 18 x 18 x 16 1500 528 0.20 0.050 0.45 99508E3 3900 18 x 18 x 21 1750 624 0.20 0.035 0.32 99509E3 4700 18 x 18 x 21 1750 752 0.22 0.035 0.32 99511E3 220 10 x 10 x 10 750 55 0.14 0.150 1.35 99601E3 330 10 x 10 x 12 900 83 0.14 0.097 0.87 99602E3 470 12.5 x 12.5 x 13 1100 118 0.14 0.075 0.68 99603E3 680 12.5 x 12.5 x 16 1300 170 0.14 0.058 0.52 99604E3 1000 16 x 16 x 16 1400 250 0.14 0.050 0.45 99605E3 1500 16 x 16 x 16 1400 375 0.14 0.050 0.45 99606E3 2200 16 x 16 x 21 1660 550 0.16 0.035 0.32 99607E3 2200 18 x 18 x 16 1500 550 0.16 0.050 0.45 99608E3 2700 18 x 18 x 21 1750 675 0.16 0.035 0.32 99609E3 47 10 x 10 x 10 750 17 0.12 0.150 1.35 99001E3 100 10 x 10 x 10 750 35 0.12 0.150 1.35 99002E3 150 10 x 10 x 10 750 53 0.12 0.150 1.35 99003E3 220 10 x 10 x 12 900 77 0.12 0.097 0.87 99004E3 330 12.5 x 12.5 x 13 1100 116 0.12 0.075 0.68 99005E3 470 12.5 x 12.5 x 16 1300 165 0.12 0.058 0.52 99006E3 680 16 x 16 x 16 1400 238 0.12 0.050 0.45 99007E3 1000 16 x 16 x 16 1400 350 0.12 0.050 0.45 99008E3 1200 18 x 18 x 16 1500 420 0.12 0.050 0.45 99009E3 1500 16 x 16 x 21 1660 525 0.12 0.035 0.32 99011E3 1800 18 x 18 x 21 1750 630 0.12 0.035 0.32 99012E3 For technical questions, contact: [email protected] Document Number: 28403 Revision: 10-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Aluminum Capacitors Vishay BCcomponents SMD (Chip), High Temperature, Low Impedance ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 50 63 CR (μF) NOMINAL CASE SIZE LxWxH (mm) IR 125 °C 100 kHz (mA) IL2 2 min (μA) tan 100 Hz Z 100 kHz 20 °C () Z 100 kHz - 40 °C () ORDERING CODE MAL2146... 47 10 x 10 x 10 600 24 0.10 0.240 2.16 99101E3 68 10 x 10 x 10 600 34 0.10 0.240 2.16 99102E3 100 10 x 10 x 10 600 50 0.10 0.240 2.16 99103E3 100 10 x 10 x 12 700 50 0.10 0.170 1.53 99104E3 150 10 x 10 x 12 700 75 0.10 0.170 1.53 99105E3 220 12.5 x 12.5 x 13 900 110 0.10 0.120 1.08 99106E3 330 12.5 x 12.5 x 16 1100 165 0.10 0.085 0.76 99107E3 470 16 x 16 x 16 1300 235 0.10 0.072 0.65 99108E3 680 16 x 16 x 16 1300 340 0.10 0.072 0.65 99109E3 1000 16 x 16 x 21 1500 500 0.10 0.052 0.47 99111E3 1000 18 x 18 x 16 1300 500 0.10 0.070 0.63 99112E3 1200 18 x 18 x 21 1600 600 0.10 0.049 0.44 99113E3 22 10 x 10 x 10 400 14 0.10 0.430 3.90 99801E3 33 10 x 10 x 10 470 21 0.10 0.380 3.40 99802E3 47 10 x 10 x 10 470 30 0.10 0.380 3.40 99803E3 68 10 x 10 x 10 470 43 0.10 0.380 3.40 99804E3 100 10 x 10 x 12 550 63 0.10 0.290 2.61 99805E3 100 12.5 x 12.5 x 13 650 63 0.10 0.210 1.89 99806E3 150 12.5 x 12.5 x 13 650 95 0.10 0.210 1.89 99807E3 220 12.5 x 12.5 x 16 800 139 0.10 0.160 1.44 99808E3 330 16 x 16 x 16 1050 208 0.10 0.100 0.90 99809E3 470 16 x 16 x 16 1050 296 0.10 0.100 0.90 99811E3 680 18 x 18 x 16 1150 428 0.10 0.095 0.86 99812E3 820 16 x 16 x 21 1300 517 0.10 0.075 0.68 99813E3 1000 18 x 18 x 21 1400 630 0.10 0.072 0.65 99814E3 Table 6 ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE IEC 60384-18, subclause 4.14 Us 1.15 x UR IEC 60384-18, subclause 4.16; TA 105 °C Urev 1 V After 2 min at UR IL2 0.01 x CR x UR Ø D = 10 mm Typ. 8 nH Ø D 12.5 mm Typ. 11 nH Calculated from tan max. and CR (see Table 5) ESR = tan /2fCR Voltage Surge voltage for short periods Reverse voltage for short periods Current Leakage current Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) at 100 Hz Document Number: 28403 Revision: 10-May-11 For technical questions, contact: [email protected] www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature, Low Impedance DISSIPATION FACTOR (tan ) CAPACITANCE (C) 10 1.2 C C0 1 1.1 tan tan0 2 1 1.0 0.9 2 1 0.8 - 60 Curve 1: 16 V Curve 2: 63 V - 40 - 20 0 20 40 60 80 C0 = Capacitance at 20 °C, 100 Hz 100 120 Tamb (°C) 0.1 - 60 - 40 - 20 20 0 40 60 tan δ0 = Typical tan δ at 20 °C, 100 Hz 80 100 120 140 Tamb (°C) Fig. 6 - Typical multiplier of dissipation factor (tan ) as a function of ambient temperature Fig. 5 - Typical multiplier of capacitance as a function of ambient temperature EQUIVALENT SERIES RESISTANCE (ESR) 10 ESR ESR0 1 0.1 2 3 10 10 10 ESR0 = typical ESR at 20 °C, 100 Hz 10 4 5 f (Hz) 10 Tamb = 20 °C Fig. 7 - Typical multiplier of ESR as a function of frequency IMPEDANCE (Z) 100 1000 Curve 1: 220-25-1010 Curve 2: 330-25-1012 Curve 3: 470-25-1213 Curve 4: 680-25-1216 Curve 5: 1500-25-1616 Curve 6: 2700-25-1821 Z (Ω) 10 Z (Ω) 100 Curve 1: 68-63-1010 Curve 2: 100-63-1012 Curve 3: 150-63-1213 Curve 4: 220-63-1216 Curve 5: 470-63-1616 Curve 6: 1000-63-1821 10 1 1 2 3 4 5 6 0.1 1 2 3 4 5 6 1 0.1 0.01 0.01 10 100 1000 10 000 100 000 f (Hz) Fig. 8 - Typical impedance as a function of frequency www.vishay.com 8 10 100 1000 10 000 100 000 f (Hz) Fig. 9 - Typical impedance as a function of frequency For technical questions, contact: [email protected] Document Number: 28403 Revision: 10-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Aluminum Capacitors Vishay BCcomponents SMD (Chip), High Temperature, Low Impedance RIPPLE CURRENT AND USEFUL LIFE Table 7 ENDURANCE TEST DURATION AND USEFUL LIFE AS A FUNCTION OF CASE SIZE NOMINAL CASE SIZE ØDxL (mm) CASE CODE ENDURANCE AT 125 °C (h) USEFUL LIFE AT 125 °C (h) USEFUL LIFE AT 40 °C 1.8 x IR APPLIED (h) 10 x 10 x 10 1010 1000 1500 150 000 10 x 10 x 12 1012 1500 2000 200 000 12.5 x 12.5 x 13 1213 2500 3000 300 000 12.5 x 12.5 x 16 1216 3000 4000 325 000 16 x 16 x 16 1616 4000 5000 350 000 16 x 16 x 21 1621 5000 6000 400 000 18 x 18 x 16 1816 4000 5000 350 000 18 x 18 x 21 1821 5000 6000 400 000 RIPPLE CURRENT AND USEFUL LIFE MBC242 I A 4.3 IR 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 Lifetime multiplier 2.8 0 1. 5 1. 2.6 0 2. 0 3. 2.4 0 4. 2.0 12 20 1.8 30 1.6 60 IA = Actual ripple current at 100 kHz IR = Rated ripple current at 100 kHz, 125 °C (1) Useful life at 125 °C and IR applied; see Table 7 0 6. 0 8. 2.2 0 10 1.4 1.2 1.0 0.8 0.5 0.0 0 20 (1) 0 40 40 50 60 70 80 90 100 110 120 130 Tamb (°C) Fig. 10 - Multiplier of useful life as a function of ambient temperature and ripple current load Document Number: 28403 Revision: 10-May-11 For technical questions, contact: [email protected] www.vishay.com 9 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 146 CTI Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature, Low Impedance Table 8 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 16 V to 25 V UR = 35 V UR = 50 V TO 63 V 50 0.60 0.45 0.40 100 0.70 0.65 0.60 300 0.80 0.80 0.75 1000 0.85 0.85 0.82 3000 0.90 0.90 0.90 10 000 0.95 0.95 0.95 30 000 0.97 0.97 0.97 100 000 1.00 1.00 1.00 Table 9 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Mounting IEC 60384-18, subclause 4.3 Shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” C/C: ± 5 % tan spec. limit IL2 spec. limit Endurance IEC 60384-18/ CECC 32300, subclause 4.15 Tamb = 125 °C; UR applied; for test duration see Table 7 UR 16 V; C/C: ± 20 % tan 2 x spec. limit IL2 spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 125 °C; UR and IR applied; for test duration see Table 7 C/C: ± 30 % tan 3 x spec. limit IL2 spec. limit no short or open circuit total failure percentage: 1 % Shelf life (storage at high temperature) IEC 60384-18/ CECC 32300, subclause 4.17 Tamb = 125 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 h to 48 h before measurement For requirements see “Endurance test” above Reverse voltage IEC 60384-18/ CECC 32300, subclause 4.16 Tamb = 125 °C: 125 h at U = - 0.5 V, followed by 125 h at UR C/C: ± 15 % tan 1.5 x spec. limit IL2 spec. limit www.vishay.com 10 For technical questions, contact: [email protected] Document Number: 28403 Revision: 10-May-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1