EUPEC D931SH

SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
Elektrische Eigenschaften / Electrical properties
Höchstzulässige Werte / Maximum rated values
Periodische Rückwärts-Spitzensperrspannung
Kenndaten
repetitive peak reverse voltage
Durchlaßstrom-Grenzeffektivwert
maximum RMS on-state current
Tvj = 0°C... Tvj max
Elektrische Eigenschaften
VRRM
6500 V
IFRMSM
1880 A
Dauergrenzstrom
average on-state current
TC = 85°C, f=50Hz
TC = 60°C, f=50Hz
IFAVM
940 A
1200 A
Stoßstrom-Grenzwert
surge current
Tvj = 25 °C, tP = 10 ms
Tvj = Tvj max, tP = 10 ms
IFSM
A
16000 A
Grenzlastintegral
I²t-value
Tvj = 25 °C, tP = 10 ms
Tvj = Tvj max, tP = 10 ms
I²t
Max. Ausschaltverluste
max. turn-off losses
Tvj = Tvjmax
IFM = 2500A, VCL = 2800V,
clamp circuit LS ≤ 0,25µH,
RCL = 68Ω, DCL = 34DSH65,
CCL = 3µF
Wmax
failure rate λ < 100
VR(D)
Durchlaßspannung
on-state voltage
Tvj = Tvj max , iF = 2500A
Schleusenspannung
threshold voltage
Ersatzwiderstand
slope resistance
Charakteristische Werte / Characteristic values
Gleichsperrspannung
continuous direct reverse voltage
200A ≤ iF ≤ 3000A
10³ A²s
1280 10³ A²s
4 MW
estimate
value
3200 V
vF
typ.
max.
4,82 V
5,6 V
Tvj = Tvj max
V(TO)
typ.
max.
1,78 V
1,99 V
Tvj = Tvj max
rT
typ.
max.
1,21 mΩ
1,44 mΩ
Tvj = Tvj max
typ.
Spitzenwert der Durchlassverzögerungsspannung
peak value of forward recovery voltage
Tvj = Tvjmax, diF/dt = 5000A/µs
IFM = 4000A
VFRM
0,702
0,000412
-0,0354
0,0673
0,739
0,00019
-0,1355
0,1084
typ.
430 V
Sperrstrom
reverse current
Tvj = Tvj max, vR = VRRM
iR
max.
100 mA
Qr
max.
3500 µAs
IRM
max.
1300 A
Eoff
max.
FRRS
typ.
Durchlaßkennlinie
on-state characteristic
v F = A + B ⋅ i F + C ⋅ Ln ( i F + 1) + D ⋅
Sperrverzögerungsladung
recovered charge
Rückstromspitze
peak reverse recovery current
Ausschaltverlust Energie
turn-off energy
Abklingsanftheit
reverse recovery softness factor
prepared by: C. Schneider
approved by: J. Przybilla
max.
iF
Tvj = Tvjmax
IFM = 2500A, VCL = 2800V,
clamp circuit LS ≤ 0,25µH,
RCL = 68Ω, CCL = 3µF,
DCL = 34DSH65, -di/dt = 1000A/µs
Tvj = Tvjmax
IFM = 2500A, VR = 2800 V,
-dirr/dt(i=0) = 1000A/µs, ∆trf = 200ns
date of publication:
revision:
A
B
C
D
A
B
C
D
8 Ws
1,6
2006-11-22
7
Seite/page
1/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
Thermische Eigenschaften / Thermal properties
Innerer Wärmewiderstand
thermal resistance, junction to case
Kühlfläche / cooling surface
Übergangs-Wärmewiderstand
thermal resistance, case to heatsink
Kühlfläche / cooling surface
beidseitig / two-sided
einseitig / single-sided
/ two-sided, θ = 180°sin
Thermischebeidseitig
Eigenschaften
beidseitig / two-sided, DC
/ anode, DC
MechanischeAnode
Eigenschaften
Kathode / cathode, DC
RthJC
RthCH
Höchstzulässige Sperrschichttemperatur
maximum junction temperature
Tvj max
Betriebstemperatur
operating temperature
Tc op
Lagertemperatur
storage temperature
Tstg
max.
max.
max.
max.
max.
max.
0,0111
0,01
0,0174
0,0236
°C/W
°C/W
°C/W
°C/W
0,003 °C/W
0,006 °C/W
140 °C
0...+140 °C
-40...+150 °C
Mechanische Eigenschaften / Mechanical properties
Gehäuse, siehe Anlage
case, see annex
Seite 3
page 3
Si-Element mit Druckkontakt
Si-pellet with pressure contact
65DSX65
Anpresskraft
clamping force
F
Gewicht
weight
G
27...45
typ.
kN
850 g
Kriechstrecke
creepage distance
30 mm
Luftstrecke
air distance
17 mm
Feuchteklasse
humidity classification
DIN 40040
Schwingfestigkeit
vibration resistance
f = 50 Hz
C
50 m/s²
Seite/page
2/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
Maßbild
1: Anode/Anode
1
2
2: Kathode/Cathode
Seite/page
3/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
Analytische Elemente des transienten Wärmewiderstandes Z thJC
Analytical elements of transient thermal impedance Z thJC
R,t – Werte
R
Pos. n
1
2
3
4
5
Rthn [°C/W]
0,00354
0,00373
0,00155
0,00093
0,00025
τn [s]
0,9
0,118
0,0282
0,00422
0,00134
Rthn [°C/W]
0,0106
0,00039
0,00462
0,00116
0,00063
τn [s]
4,89
0,253
0,0883
0,00932
0,00185
Rthn [°C/W]
0,01687
0,00024
0,00426
0,0013
0,00093
τn [s]
4,52
0,745
0,113
0,0214
0,00359
R,T-Werte
beidseitig
two-sided
anodenseitig
anode-sided
kathodenseitig
cathode-sided
ZthJC =
Analytische Funktion / Analytical function:
6
nmax
Σ
n=1
7
-t
Rthn 1 − e
τn
0,025
cl
0,0225
0,02
0,0175
0,015
0,0125
bl
0,01
Zth JC [K/W]
al
0,0075
0,005
0,0025
0,001
0,01
0,1
1
10
0
100
t [s]
Transienter innerer Wärmewiderstand für DC/ Transient thermal impedance Z thJC = f(t) for DC
a : Anodenseitige Kühlung / Anode-sided cooling
b : Beidseitige Kühlung / Two-sided cooling
c : Kathodenseitige Kühlung / Cathode-sided cooling
Seite/page
4/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
3500
Diagramme
Diagramme
Durchlasskennlinie
3000
2500
typ.
max.
i F [A]
2000
1500
1000
500
0
0
1
2
3
4
5
6
7
vF [V]
Grenzdurchlaßkennlinie / Limiting on-state characteristic iF = f(vF)
Tvj = Tvj max
Seite/page
5/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
4000
Tc beidseitig
IFM=2500A
3500
3000
IFM=1000A
Q r [µAs]
2500
2000
IFM=500A
1500
1000
IFM=100A
500
0
0
200
400
600
800
1000
1200
1400
-di/dt [A/µs]
Sperrverzögerungsladung / Recovered charge Qr = f(-di/dt)
Tvj=Tvjmax, clamp circuit LS ≤ 0,25µH,RCL = 68Ω
CCL = 3µF, DCL = 34DSH65
Seite/page
6/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
1600
1400
IFM=2500A
IFM=1000A
1200
IFM=500A
I RM [A]
1000
800
IFM=100A
600
400
200
0
0
200
400
600
800
1000
1200
1400
-di/dt [A/µs]
Rückstromspitze / peak reverse recovery current IRM = f(-di/dt)
Tvj=Tvjmax, clamp circuit LS ≤ 0,25µH,RCL = 68Ω
CCL = 3µF, DCL = 34DSH65
Seite/page
7/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
9
IFM=2500A
8
7
6
IFM=1000A
Eoff [Ws]
5
IFM=500A
4
3
2
1
IFM=100A
0
0
200
400
600
800
1000
1200
1400
-di/dt [A/µs]
Ausschaltverlust Energie / turn-off energy Eoff = f(-di/dt)
Tvj=Tvjmax, clamp circuit LS ≤ 0,25µH,RCL = 68Ω
CCL = 3µF, DCL = 34DSH65
Seite/page
8/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
500
450
400
typ.
350
V FRM [V]
300
250
200
150
100
50
0
0
Ta bei Sinus
1000
2000
3000
4000
5000
6000
diF /dt [A/µs]
Spitzenwert-Durchlassverzögerungsspannung / peak value forward recovery voltage VFRM = f(diF/dt)
Tvj=Tvjmax, IFM = 4000A
Seite/page
9/10
SH
Datenblatt / Data sheet
Schnelle beschaltungslose Diode
Fast Hard Drive Diode
D 931SH
Nutzungsbedingungen
Die in diesem Produktdatenblatt enthaltenen Daten sind ausschließlich für technisch geschultes Fachpersonal bestimmt. Die
Beurteilung der Geeignetheit dieses Produktes für die von Ihnen anvisierte Anwendung sowie die Beurteilung der
Vollständigkeit der bereitgestellten Produktdaten für diese Anwendung obliegt Ihnen bzw. Ihren technischen Abteilungen.
In diesem Produktdatenblatt werden diejenigen Merkmale beschrieben, für die wir eine liefervertragliche Gewährleistung
übernehmen. Eine solche Gewährleistung richtet sich ausschließlich nach Maßgabe der im jeweiligen Liefervertrag enthaltenen
Bestimmungen. Garantien jeglicher Art werden für das Produkt und dessen Eigenschaften keinesfalls übernommen.
Sollten Sie von uns Produktinformationen benötigen, die über den Inhalt dieses Produktdatenblatts hinausgehen und
insbesondere eine spezifische Verwendung und den Einsatz dieses Produktes betreffen, setzen Sie sich bitte mit dem für Sie
zuständigen Vertriebsbüro in Verbindung (siehe www.eupec.com, Vertrieb&Kontakt). Für Interessenten halten wir Application
Notes bereit.
Aufgrund der technischen Anforderungen könnte unser Produkt gesundheitsgefährdende Substanzen enthalten. Bei
Rückfragen zu den in diesem Produkt jeweils enthaltenen Substanzen setzen Sie sich bitte ebenfalls mit dem für Sie
zuständigen Vertriebsbüro in Verbindung.
Sollten Sie beabsichtigen, das Produkt in Anwendungen der Luftfahrt, in gesundheits- oder lebensgefährdenden oder
lebenserhaltenden Anwendungsbereichen einzusetzen, bitten wir um Mitteilung. Wir weisen darauf hin, dass wir für diese Fälle
- die gemeinsame Durchführung eines Risiko- und Qualitätsassessments;
- den Abschluss von speziellen Qualitätssicherungsvereinbarungen;
- die gemeinsame Einführung von Maßnahmen zu einer laufenden Produktbeobachtung dringend
empfehlen und gegebenenfalls die Belieferung von der Umsetzung solcher Maßnahmen abhängig
machen.
Soweit erforderlich, bitten wir Sie, entsprechende Hinweise an Ihre Kunden zu geben.
Inhaltliche Änderungen dieses Produktdatenblatts bleiben vorbehalten.
Terms & Conditions of usage
The data contained in this product data sheet is exclusively intended for technically trained staff. You and your technical
departments will have to evaluate the suitability of the product for the intended application and the completeness of the product
data with respect to such application.
This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is
granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the
product and its characteristics.
Should you require product information in excess of the data given in this product data sheet or which concerns the specific
application of our product, please contact the sales office, which is responsible for you (see www.eupec.com, sales&contact).
For those that are specifically interested we may provide application notes.
Due to technical requirements our product may contain dangerous substances. For information on the types in question please
contact the sales office, which is responsible for you.
Should you intend to use the Product in aviation applications, in health or live endangering or life support applications, please
notify. Please note, that for any such applications we urgently recommend
- to perform joint Risk and Quality Assessments;
- the conclusion of Quality Agreements;
- to establish joint measures of an ongoing product survey, and that we may make delivery depended on
the realization of any such measures.
If and to the extent necessary, please forward equivalent notices to your customers.
Changes of this product data sheet are reserved.
Seite/page
10/10