EVERLIGHT 12-22-R6GHC-A30

Technical Data Sheet
Right Angle Lens Chip LEDs with Bi-Color(Multi-Color)
12-22/R6GHC-A33/2C
Features
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow
solder process.
․Multi-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
Descriptions
․The 12-22 SMD LED is much smaller
than lead frame type components, thus
enable smaller board size, higher packing
density, reduced storage space and finally
smaller equipment to be obtained.
․Besides, lightweight makes them ideal for
miniature applications. etc.
Applications
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in
telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Device Selection Guide
Chip
Emitted Color
Type
Material
R6
AlGaInP
Brilliant Red
GH
InGaN
Brilliant Green
Resin Color
Water Clear
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 1 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Package Outline Dimensions
Note: The tolerances unless mentioned is ±0.1mm,Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 2 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Absolute Maximum Ratings (Ta=25℃
℃)
Parameter
Symbol
Rating
Unit
Reverse Voltage
VR
5
V
Forward Current
IF
Peak Forward Current
(Duty 1/10 @1KHz)
IFP
R6:25
mA
GH:25
R6:60
mA
GH:100
R6:60
Power Dissipation
Pd
mW
Electrostatic Discharge(HBM)
ESD
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +90
℃
Soldering Temperature
Tsol
GH:95
R6:2000
V
GH:150
Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 3 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Electro-Optical Characteristics (Ta=25℃
℃)
Parameter
Luminous Intensity
Viewing Angle
Peak Wavelength
Symbol
Min.
Typ.
Max.
Iv
R6
72.0
----
180
GH
112
----
285
-----
120
-----
deg
-----
nm
2θ1/2
λp
R6
-----
GH
Dominant Wavelength
λd
R6
Forward Voltage
Reverse Current
518
-----
517.5
△λ R6
-----
633.5
529.5
----nm
35
GH
IR
R6
1.7
2.0
2.4
GH
2.7
3.3
3.7
-----
-----
R6
IF=20mA
20
-----
VF
Condition
mcd
nm
GH
Spectrum Radiation
Bandwidth
617.5
632
Unit
V
10
μA
VR=5V
50
GH
Notes:
1.Tolerance of Luminous Intensity ±11%
2.Tolerance of Dominant Wavelength ±1nm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 4 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Bin Range Of Luminous Intensity
R6
Bin
Min
Max
Q
72.0
112
R
112
180
Bin
Min
Max
R
112
180
S
180
285
Unit
Condition
mcd
IF=20mA
Unit
Condition
mcd
IF=20mA
GH
Bin Range Of Dom. Wavelength
R6
Group
A
Bin
Min
Max
E4
617.5
621.5
E5
621.5
625.5
E6
625.5
629.5
E7
629.5
633.5
Bin
Min
Max
B10
517.5
519.5
B11
519.5
521.5
B12
521.5
523.5
B13
523.5
525.5
B14
525.5
527.5
B15
527.5
529.5
Unit
Condition
nm
IF =20mA
Unit
Condition
nm
IF =20mA
GH
Group
C
Notes:
1.Tolerance of Luminous Intensity ±11%
2. Tolerance of Dominant Wavelength: ±1nm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 5 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Typical Electro-Optical Characteristics Curves
R6
Ta=25°C
Forward Current
I (mA)
Relative luminous intensity ( % )
Ta=25°C
Wavelength λ(nm)
Forward Voltage VF (V)
Relative luminous intensity ( %)
Relative luminous intensity ( % )
Ta=25°C
Ambient Temperature Ta(°C )
Forward Current I (mA)
Ta=25°C
10°
20°
I (mA)
0°
Forward Current
30°
40°
1.0
0.9
50°
0.8
60°
70°
0.7
80°
90°
Ambient Temperature Ta (°C )
0.5
0.3
0.1
0.2
0.4
0.6
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 6 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Typical Electro-Optical Characteristics Curves
GH
Ta=25°C
Forward Current
I (mA)
Relative luminous intensity ( % )
Ta=25°C
Wavelength λ(nm)
Forward Voltage VF (V)
Relative luminous intensity ( %)
Relative luminous intensity ( % )
Ta=25°C
Ambient Temperature Ta(°C )
Forward Current I (mA)
Ta=25°C
0°
10°
20°
I (mA)
30°
Forward Current
40°
1.0
0.9
50°
0.8
60°
70°
0.7
80°
90°
Ambient Temperature Ta (°C )
0.5
0.3
0.1
0.2
0.4
0.6
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 7 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Label explanation
CAT: Luminous Intensity Rank
Pb
HUE: Dom. Wavelength Rank
CPN :
P N : XXXXXXXXXXXXX
REF: Forward Voltage Rank
XXXXXXXXXXXXX
EVERLIGHT
RoHS
CAT : XXX
HUE : XXX
REF : XXX
QTY : XXX
LOT NO : XXXXXXXXXX
Reference : XXXXXXXX
MADE IN TAIWAN
Reel Dimensions
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 8 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel
Note: The tolerances unless mentioned is ±0.1mm, Unit = mm
Moisture Resistant Packaging
Label
Aluminum moisture-proof bag
Desiccant
Label
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 9 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below.
Confidence level:90%
LTPD:10%
Test
Sample
Hours/Cycles
Size
No.
Items
Test Condition
1
Reflow Soldering
Temp. : 260℃±5℃
Min. 5sec.
6 Min.
22 PCS.
0/1
Temperature Cycle
H : +100℃ 15min
∫ 5 min
L : -40℃ 15min
300 Cycles
22 PCS.
0/1
Thermal Shock
H : +100℃ 5min
∫ 10 sec
L : -10℃ 5min
300 Cycles
22 PCS.
0/1
Temp. : 100℃
1000 Hrs.
22 PCS.
0/1
Temp. : -40℃
1000 Hrs.
22 PCS.
0/1
2
3
High Temperature
Storage
Low Temperature
Storage
4
5
Ac/Re
6
DC Operating Life
IF = 20 mA
1000 Hrs.
22 PCS.
0/1
7
High Temperature /
High Humidity
85℃/ 85%RH
1000 Hrs.
22 PCS.
0/1
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 10 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
Precautions For Use
1. Over-current-proof
Customer must apply resistors for protection , otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 11 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao
12-22/R6GHC-A30/2C
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do
soldering of each terminal. Be careful because the damage of the product is often started at the time of the
hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a
double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether
the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD.
Office: No 25, Lane 76, Sec 3, Chung Yang Rd,
Tucheng, Taipei 236, Taiwan, R.O.C
Tel: 886-2-2267-2000, 2267-9936
Fax: 886-2267-6244, 2267-6189, 2267-6306
http://www.everlight.com
Everlight Electronics Co., Ltd.
http://www.everlight.com
Rev.1
Page: 12 of 12
Device No.
Prepared date: 30-Jun-2011
Prepared by: Haizheng Gao