Technical Data Sheet 0603 Package Chip LED (0.2mm Height) 19-219/T3D-AQ2R2TY/3T Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Mono-color type. ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 19-219 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Part No. 19-219/T3D-AQ2R2TY/3T Chip Material InGaN Emitted Color Resin Color Pure White Yellow Diffused Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Rev.3 Page: 1 of 12 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Package Outline Dimensions 0.8 1.6 Polarity 0.2±0.05 Recommend soldering pad 0.35 0.75 0.75 0.70 0.70 0.65 Cathode 0.75 0.35 0.70 Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 2 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF 25 mA IFP 100 mA Power Dissipation Pd 95 mW Electrostatic Discharge(HBM) ESD 150 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Peak Forward Current (Duty 1/10 @1KHz) Reflow Soldering : 260 ℃ for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Luminous Intensity Iv 90 ----- 180 mcd Viewing Angle 2θ1/2 ----- 130 ----- deg Forward Voltage VF 2.60 ----- 3.00 V Reverse Current IR ----- ----- 50 μA Condition IF=5mA VR=5V Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 3 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Bin Range Of Luminous Intensity Bin Min Max Q2 90 112 R1 112 140 R2 140 180 Unit Condition mcd IF=5mA Bin Range Of Forward Voltage Group T Bin Min Max 28 2.60 2.70 29 2.70 2.80 30 2.80 2.90 31 2.90 3.00 Unit Condition V IF=5mA Notes: 1.Tolerance of Luminous Intensity ±11% 2.Tolerance of Forward Voltage ±0.05V Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 4 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Chromaticity Coordinates Specifications for Bin Grading Group Bin Code 1 2 3 A 4 5 6 CIE_x CIE_y Condition 0.274 0.274 0.294 0.294 0.274 0.274 0.294 0.294 0.294 0.294 0.314 0.314 0.294 0.294 0.314 0.314 0.314 0.314 0.334 0.334 0.314 0.314 0.334 0.334 0.226 0.258 0.286 0.254 0.258 0.291 0.319 0.286 0.254 0.286 0.315 0.282 0.286 0.319 0.347 0.315 0.282 0.315 0.343 0.311 0.315 0.347 0.376 0.343 IF= 5mA Notes: 1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01). 2.The products are sensitive to static electricity and care must be fully taken when handling products. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 5 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T CIE Chromaticity Diagram Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 6 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C Forward Current IF (mA) Relative luminous intensity (%) 100 75 50 25 0 400 500 600 700 40 30 25 20 10 0 2.6 800 Wavelength λ (nm) Relative luminous intensity (%) Relative luminous intensity (%) 100 10 0 20 40 60 80 100 1000 4.2 4.5 Ta=25°C f=1KHz Duty=1/10 10 1 0 10 2 1 10 10 Forward Current I F (mA) Radiation Diagram Forward Current Derating Curve I F (mA) 3.8 100 Ambient Temperature Ta (°C) Forward Current 3.4 Luminous Intensity vs. Forward Current Ambient Temperature 1 -60 -40 -20 3.0 Forward Voltage VF (V) Luminous Intensity vs. 1000 Ta=25°C 50 0° 50 10° Ta=25°C 20° 30° 40 30 25 20 10 0 40° 1.0 0.9 50° 0.8 60° 0.7 0 20 40 60 80 100 0.5 0.3 0.1 0.2 0.4 0.6 70° 80° 90° Ambient Temperature Ta (°C) Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 7 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Label Explanation CAT: Luminous Intensity Rank Pb HUE: Chromaticity Coordinates CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank EVERLIGHT RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 8 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 9 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Max. 10sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 10 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 26 0°C M ax . 10 sec. M ax. A bo ve25 5°C 3 0sec.M ax . 3°C /sec.M ax . 6°C /sec.M ax . P re-h eatin g A b o v e 2 1 7 °C 6 0~ 1 5 0sec. 1 50 ~ 20 0 °C 6 0 ~ 1 2 0 sec. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 11 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo 19-219/T3D-AQ2R2TY/3T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev.3 Page: 12 of 12 Device No. : DSE-0005383 Prepared date: 05-Jul-2011 Prepared by: Ashley Kuo