Technical Data Sheet Full Color Chip LED (Chip LED with Right Angle Lens) 22-23C/R6GHBHW-C01/2C Features ․Package in 8mm tape on 7〞diameter reel. ․Compatible with automatic placement equipment. ․Compatible with infrared and vapor phase reflow solder process. ․Full-color type. ․Pb-free. ․Halogen-free. ․Component surface is Tin plating. ․The product itself will remain within RoHS compliant version. Descriptions ․The 22-23C SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ․Besides, lightweight makes them ideal for miniature applications. etc. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green BH InGaN Blue Resin Color White Diffused Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 1 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Package Outline Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 2 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Unit Reverse Voltage VR 5 V R6:25 Forward Current IF GH:30 mA BH:30 Peak Forward Current (Duty 1/20 @Pulse 1ms) R6:60 IFP GH:100 mA BH:100 R6:60 Power Dissipation Pd GH:95 mW BH:95 R6:2000 Electrostatic Discharge ESD GH:150 V BH:150 Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering(30W) : 350 ℃ for 5 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 3 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Electro-Optical Characteristics (Ta=25℃) Parameter Luminous Intensity Symbol Iv Viewing Angle Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth Forward Voltage Reverse Current R6 GH BH 2θ1/2 λp λd R6 GH BH R6 GH BH △λ R6 GH BH VF R6 GH BH IR R6 GH Min. Typ. Max. 14.5 35.0 Condition mcd IF=5mA ----- deg IF=5mA ----- nm IF=5mA nm IF=5mA nm IF=5mA V IF=5mA μA VR=5V 36.0 ----- 110 10.0 ----- Unit 24.5 130 626 ----- 518 468 613.0 619.0 625.0 523.0 531.5 540.0 466.5 472.5 478.5 ----- 20 35 25 ----- 1.70 1.85 2.00 2.70 2.90 3.20 2.70 2.90 3.10 ----- 10 50 50 ----- BH Notes: 1.Tolerance of Luminous Intensity ±11% 2. Tolerance of Dominant Wavelength ±1nm 3.Tolerance of Forward Voltage ±0.1V Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 4 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C R6 Bin Range Of Luminous Intensity Bin Min Max 1 14.5 22.5 2 22.5 36.0 Unit Condition mcd IF=5mA Unit Condition mcd IF=5mA Unit Condition nm IF=5mA Unit Condition mcd IF=5mA GH Bin Range Of Luminous Intensity Bin Min Max A 35.0 55.0 B 55.0 80.0 C 80.0 110 Bin Range Of Dom. Wavelength Bin Min Max 1 523.0 531.5 2 531.5 540.0 BH Bin Range Of Luminous Intensity Bin Min Max 1 10.0 17.5 2 17.5 24.5 Note: Tolerance of Luminous Intensity ±11% Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 5 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Typical Electro-Optical Characteristics Curves R6 Forward Current vs. Forward Voltage Ta=25°C Forward Current IF (mA) 100 75 50 25 0 500 1000 550 600 650 Wavelength λ (nm) 40 30 25 20 10 0 1.2 1.6 2.0 2.4 2.8 3.0 Forward Voltage VF (V) Luminous Intensity vs. Luminous Intensity vs. Ambient Temperature Forward Current 100 10 1 -60 -40 -20 Ta=25°C 1000 100 10 1 0 10 0 20 40 60 80 100 10 1 10 2 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) Ta=25°C 50 700 Relative luminous intensity (%) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution 50 Ta=25°C 20° 30° 40 20 10 0 40° 1.0 30 25 0.9 50° 0.8 60° 70° 0.7 20 0 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 6 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Typical Electro-Optical Characteristics Curves GH I (mA) 40 F 75 50 25 0 400 450 500 550 30 25 20 10 0 2.6 600 Luminous Intensity vs. Relative luminous intensity (%) Ambient Temperature 1000 100 10 1 -60 -40 -20 3.0 3.4 1000 4.5 f=1KHz Duty=1/10 100 10 1 10 0 20 40 60 80 100 10 10 Forward Current IF(mA) Radiation Diagram Forward Current Derating Curve 0° 50 IF(mA) 4.2 Luminous Intensity vs Forward Current Ta=25°C Ambient Temperature Ta (°C) Forward Current 3.8 Forward Voltage VF (V) Wavelength λ (nm) Relative luminous intensity (%) Forward Current vs. Forward Voltage Ta=25°C 50 100 Forward Current Relative luminous intensity (%) Spectrum Distribution Ta=25°C Ta=25°C 10° 20° 30° 40 40° 30 25 1.0 20 0.9 50° 0.8 60° 10 70° 0.7 0 20 0 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 7 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Typical Electro-Optical Characteristics Curves BH Forward Current vs. Forward Voltage Ta=25°C 100 Forward Current IF (mA) Relative luminous intensity (%) Spectrum Distribution 75 50 25 0 400 450 500 550 40 30 25 20 10 0 2.6 600 Wavelength λ (nm) Relative luminous intensity (%) Relative luminous intensity (%) 3.8 4.2 Forward Current 100 10 0 20 40 60 80 100 1000 4.5 Ta=25°C f=1KHz Duty=1/10 100 10 1 10 2 1 10 10 Forward Current IF (mA) Ambient Temperature Ta (°C) Radiation Diagram 0° 10° Forward Current Derating Curve Forward Current IF (mA) 3.4 Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 3.0 Forward Voltage VF (V) Luminous Intensity vs. 1000 Ta=25°C 50 50 Ta=25°C 20° 30° 40 30 25 20 10 0 40° 1.0 0.9 50° 0.8 60° 70° 0.7 20 0 40 60 85 100 Ambient Temperature Ta (°C) 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 8 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm , Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 9 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Carrier Tape Dimensions: Loaded quantity 3000 PCS per reel Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 10 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 11 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 12 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan 22-23C/R6GHBHW-C01/2C 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1 Page: 13 of 13 Device No. : DSE-0001583 Prepared date: 20-May-2009 Prepared by: Esther Yan