EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version Descriptions ․The 67-21 series is available in soft orange, green, blue, and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the LED ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Resin Color Brilliant Red Water Clear Material AlGaInP Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 1 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Package Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 2 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current(Duty 1/10 @1KHz) IFP 100 mA Power Dissipation Pd 120 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 360 ----- 900 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 632 ----- nm IF=20mA Dominant Wavelength λd 621 ----- 631 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=20mA Forward Voltage VF 1.75 -- 2.35 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 3 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Bin Range of Luminous Intensity Bin Code Min. Max. T2 360 450 U1 450 565 U2 565 715 V1 715 900 Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Unit Condition V IF=20mA Bin Range of Dominant Wavelength Group Bin Code Min. Max. FF1 621 626 FF2 626 631 Bin Code Min. Max. 0 1.75 1.95 1 1.95 2.15 2 2.15 2.35 F Bin Range of Forward Voltage Group B Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 4 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C I (mA) 75 50 25 0 550 600 650 700 Wavelength λp(nm) 40 30 20 10 0 1.2 750 Relative luminous intensity ( %) Relative luminous intensity ( % ) 2.0 100 3.0 10 Ta=25°C 100 10 1 0 10 0 20 40 60 80 100 3 2 1 10 10 10 Forward Current I (mA) Radiation Diagram Forward Current Derating Curve 0° 10° 20° Ta=25°C 60 I (mA) 2.8 1000 Ambient Temperature Ta(°C ) Forward Current 2.4 Luminous Intensity vs Forward Current Ambient Temperature 1 -60 -40 -20 1.6 Forward Voltage VF (V) Luminous Intensity vs. 1000 Ta=25°C 50 Forward Current Relative luminous intensity ( % ) 100 30° 50 40 30 20 0.9 0.8 10 0.7 0 40° 1.0 0 20 40 60 85 100 50° 0.5 0.3 0.1 0.2 0.4 0.6 60° 70° 80° 90° Ambient Temperature Ta (°C ) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 5 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Label Explanation CAT: Luminous Intensity Rank Pb HUE: Dom. Wavelength Rank EVERLIGHT CPN : P N : XXXXXXXXXXXXX REF: Forward Voltage Rank RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 6 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: Tolerance unless mentioned is ±0.1mm; Unit = mm Moisture Resistant Packaging Label Revision Aluminum moistue-proof bag Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Desiccant Rev. 1 Label Page: 7 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Revision No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5 sec. 6 Min. 22 PCS 0/1 2 Temperature Cycle H : +100℃ 15min ∫ 5 min L : -40℃ 15min 300 Cycles 22 PCS. 0/1 3 Thermal Shock H : +100℃ 5min ∫ 10 sec L : -10℃ 5min 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA / 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 8 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 168hrs under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. . 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 9 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever EVERLIGHT ELECTRONICS CO., LTD. Technical Data Sheet Top View LEDs 67-21/RSC-FT2V1B/2T 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. :DSE-0003710 Prepared date: 2-JUNE -2010 :1 LifecyclePhase: Rev. 1 Page: 10 of 10 Prepared by: Irene Lin Release Date:2010-06-08 19:01:59.0 Expired Period: Forever