Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Features ․P-LCC-2 package. ․White package. ․Optical indicator. ․Colorless clear window. ․Wide viewing angle. ․Suitable for vapor-phase reflow, Infrared reflow and wave solder processes. ․Computable with automatic placement equipment. ․Available on tape and reel (8mm Tape). ․Pb-free. ․The product itself will remain within RoHS compliant version. Descriptions ․The 67-21 series is available in soft orange, green,blue and yellow. Due to the package design, the LED has wide viewing angle and optimized light coupling by inter reflector. This feature makes the ideal for light pipe application. The low current requirement makes this device ideal for portable equipment or any other application where power is at a premium. Applications ․Automotive: backlighting in dashboard and switch. ․Telecommunication: indicator and backlighting in telephone and fax. ․Flat backlight for LCD, switch and symbol. ․Light pipe application. ․General use. Device Selection Guide Chip Emitted Color Resin Color Reddish Orange Water Clear Material AlGaInP Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 1 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Package Dimensions Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 2 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Units Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current(Duty 1/10 @1KHz) IFP 60 mA Power Dissipation Pd 60 mW Electrostatic Discharge(HBM) ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +90 ℃ Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec. Hand Soldering : 350 ℃ for 3 sec. Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Max. Unit Condition Luminous intensity IV 180 ----- 360 mcd IF=20mA Viewing Angle 2θ1/2 ----- 120 ----- deg IF=20mA Peak Wavelength λp ----- 621 ----- nm IF=20mA Dominant Wavelength λd 605.5 ----- 621.5 nm IF=20mA Spectrum Radiation Bandwidth △λ ----- 20 ----- nm IF=20mA Forward Voltage VF ----- 2.0 2.4 V IF=20mA Reverse Current IR ----- ----- 10 μA VR=5V Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 3 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Bin Range of Luminous Intensity Bin Min. Max. S1 180 225 S2 225 285 T1 285 360 Unit Condition mcd IF=20mA Unit Condition nm IF=20mA Bin Range of Dominant Wavelength Group Bin Code Min. Max. E1 605.5 609.5 E2 609.5 613.5 E3 613.5 617.5 E4 617.5 621.5 A Notes: 1. Tolerance of Luminous Intensity: ±11% 2. Tolerance of Dominant Wavelength: ±1nm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 4 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Typical Electro-Optical Characteristics Curves Forward Current vs. Forward Voltage Spectrum Distribution Ta=25°C 50 Forward Current IF (mA) Relative Luminous Intensity (%) 100 75 50 25 0 500 600 650 550 Wavelength λ (nm) 40 30 20 10 0 2.2 2.4 2.6 Relative Luminous Intensity vs. Forward Current Ta=25°C 100 10 0 20 40 60 80 100 Relative Luminous Intensity (%) Relative Luminous Intensity (%) 1000 1000 f=1KHz Duty=1/10 100 10 1 0 10 Ambient Temperature Ta (°C) 2 1 10 10 Forward Current I F (mA) 3 10 Radiation Diagram Forward Current Derating Curve 0° 50 Forward Current IF (mA) 2.0 Forward Voltage V (V) F Relative Luminous Intensity vs. Ambient Temperature 1 -60 -40 -20 1.8 1.6 700 Ta=25°C Ta=25°C 10° 20° 30° 40 30 20 10 0 0 40° 1.0 20 40 60 80 100 0.9 50° 0.8 60° 0.7 70° 80° 90° 0.5 0.3 0.1 0.2 0.4 0.6 Ambient Temperature Ta (°C) Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 5 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Pb EVERLIGHT CPN : P N : XXXXXXXXXXXXX RoHS XXXXXXXXXXXXX CAT : XXX HUE : XXX REF : XXX QTY : XXX LOT NO : XXXXXXXXXX Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: The tolerances unless mentioned is ±0.1mm; Unit = mm Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 6 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Carrier Tape Dimensions: Loaded Quantity 2000 pcs Per Reel. Note: The tolerances unless mentioned is ±0.1mm: Unit = mm Moisture Resistant Packaging Label Revision Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Label Rev. 1 Page: 7 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% Revision No. Items Test Condition Test Hours/Cycles Sample Size Ac/Re 1 Reflow Soldering Temp. : 260℃±5℃ Min. 5sec. 6 min 22 PCS. 0/1 2 Temperature Cycle 300 Cycles 22 PCS. 0/1 3 Thermal Shock 300 Cycles 22 PCS. 0/1 4 High Temperature Storage Temp. : 100℃ 1000 Hrs. 22 PCS. 0/1 5 Low Temperature Storage Temp. : -40℃ 1000 Hrs. 22 PCS. 0/1 6 DC Operating Life IF = 20 mA/ 25℃ 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85℃/ 85%RH 1000 Hrs. 22 PCS. 0/1 H : +100℃ 15min ∫ 5 min L : -40℃ 15min H : +100℃ 5min ∫ 10 sec L : -10℃ 5min Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 8 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less. 2.3 After opening the package: The LED's floor life are 168 hours under 30℃ or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60±5℃ for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 1~5 °C / Sec. 260°C. Max. 10 Sec. Max. 1~5 °C / Sec. Pre-heating 180~200°C 60 Sec. Max. Above 220°C 120 Sec. Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. Revision Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 9 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever Technical Data Sheet TOP View LEDs 67-21/S3C-AS1T1/2T 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Revision Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : DSE-0000594 Prepared date:17-Apr-2006 :1 LifecyclePhase: Rev. 1 Page: 10 of 10 Prepared by: Rita Shen Release Date:2010-04-23 11:15:11.0 Expired Period: Forever