Technical Data Sheet Opto Interrupter ITR8010 █ Features ․Fast response time ․High analytic ․Cut-off visible wavelength λp=940nm ․High sensitivity ․Pb free ․This product itself will remain within RoHS compliant version █ Descriptions ․The ITR8010 consist of an infrared emitting diode and an NPN silicon phototransistor, encased side-by-side on converging optical axis in a black thermoplastic housing, ․The phototransistor receives radiation from the LED only .This is the normal situation. ․But when an object is in between , phototransistor could not receives the radiation. ․For additional component information , please refer to IR and PT. █ Applications ․Mouse Copier ․Switch Scanner ․Floppy disk driver ․Non-contact Switching ․For Direct Board █ Device Selection Guide Device No. Chip Material LENS COLOR IR GaAlAs Water clear PT Silicon Water clear Everlight Electronics Co., Ltd. http:\\www.everlight.com Device No Prepared date ：CDRX-810-010 ：2006/12/29 ：1 Rev Page ： ：1 of 7 Prepared by Kunjiang Xie ITR8010 █ Package Dimensions Notes: 1.All dimensions are in millimeters 2.Tolerances unless dimensions ±0.2mm 3.Lead spacing is measured where the lead emerge from the package 4.Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification 5.These specification sheets include materials protected under copyright of EVERLIGHT corporation . Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent 6.When using this product , please observe the absolute maximum ratings and the instructions for use outlined in these specification sheets. EVERIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. Everlight Electronics Co., Ltd. http:\\www.everlight.com Device No Prepared date ：CDRX-810-010 ：2006/12/29 ：1 Rev Page ： ：2 of 7 Prepared by Kunjiang Xie ITR8010 █ Absolute Maximum Ratings (Ta=25℃ ℃) Parameter Power Dissipation at(or below) 25℃ Free Symbol Ratings Unit Pd 75 mW Reverse Voltage VR 5 V Forward Current IF 50 mA Peak Forward Current (*1) Pulse width ≦100μs, Duty cycle=1% IFP 1 A Collector Power Dissipation Pc 75 mW Collector Current IC 20 mA Collector-Emitter Voltage B VCEO 30 V Emitter-Collector Voltage B VECO 5 Operating Temperature Topr -25~+85 V ℃ Storage Temperature Tstg -40~+85 ℃ Tsol 260 ℃ Air Temperature Input Output Lead Soldering Temperature (*2) (1/16 inch form body for 5 seconds) (*1) tw=100 μsec. , T=10 msec. (*2) t=5 Sec █ Electro-Optical Characteristics (Ta=25℃ ℃) Parameter Forward Voltage Reverse Current Input Max. Unit Conditions ----- 1.2 --- 1.5 10 V μA IF=20mA --- 940 --- nm IF=20mA 2θ1/2 --- 40 --- Deg IF=20mA Dark C urrent ICEO --- --- 100 nA VCE=20V,Ee=0mW/cm2 C-E Saturation Voltage VCE(sat) --- --- 0.4 V IC=2mA ,Ee=1mW/cm2 IC(ON) 0.9 --- 15 mA IC(OFF) --- --- 20 μA VCE=5V IF=20mA tr tf ----- 15 15 ----- μsec μsec VCE=5V IC=1mA RL=1KΩ View Angle Transfer Characteristics Min. Typ. VF IR λP Peak Wavelength Output Symbol VR=5V Collect Current Rise time Fall time Everlight Electronics Co., Ltd. http:\\www.everlight.com Device No Prepared date ：CDRX-810-010 ：2006/12/29 ：1 Rev Page ： ：3 of 7 Prepared by Kunjiang Xie ITR8010 █ Typical Electrical/Optical/Characteristics Curves for IR Fig.1 Forward Current vs. Ambient Temperature Fig.2 Spectral Distribution 70 100 60 80 50 IF=20mA Ta=25°C 60 40 40 30 20 20 10 0 0 -40 -20 0 Fig.3 20 40 60 80 100 Peak Emission Wavelength Fig.4 vs. Ambient Temperature Forward Current vs. Forward Voltage 10 980 960 10 4 3 940 10 2 920 900 -25 1 10 0 50 25 75 0 100 Fig.5 Forward Current vs Ambient Temperature(°C) 1 2 3 4 Fig.6 Relative Radiant Intensity vs. Angular Displacement -20 1.3 0 -10 10 20 30 1.2 IF=20mA 1.1 1.0 40 0.9 50 0.8 0.7 60 70 80 1 25 50 75 100 120 0.6 0.4 0.2 Everlight Electronics Co., Ltd. http:\\www.everlight.com Device No Prepared date ：CDRX-810-010 ：2006/12/29 0 ：1 Rev 0.2 0.4 0.6 Page ： ：4 of 7 Prepared by Kunjiang Xie ITR8010 █ Typical Electrical/Optical/Characteristics Curves for PT Fig.1Collector Power Dissipation vs. Ambient Temperature Fig.2 Spectral Sensitivity 100 1.0 80 0.8 60 0.6 40 0.4 20 0.2 Ta=25 C 0 0 -25 25 0 50 75 85 100 Fig.3 Relative Collector Current vs. Ambient Temperature 100 300 500 700 900 1100 1300 Fig.4 Collector Current vs. Irradiance 160 100 2 140 C 120 10 100 80 1 60 40 0.1 20 0 0 10 20 30 40 50 60 0.01 0.5 70 1.5 1 3 2 Fig.5 Collector Dark Current vs. Ambient Temperature Fig.6 Collector Current vs. Collector-Emitter Voltage 14 10 12 10 10 8 10 6 4 10 2 10 0 25 50 75 0 0 100 Everlight Electronics Co., Ltd. http:\\www.everlight.com Device No Prepared date ：CDRX-810-010 ：2006/12/29 1 2 ：1 Rev 3 4 Page ：5 of 7 ： Prepared by Kunjiang Xie ITR8010 █ Reliability Test Item And Condition The reliability of products shall be satisfied with items listed below. Confidence level：90% LTPD：10% NO. Item 1 Solder Heat Test Condition TEMP : 260℃ ± 5 ℃ H : +100 2 ℃ Temperature 5 min Cycle ℃ H : +100℃ 4 5 High Temperature Storage Low Temperature ℃ TEMP. : -40 ℃ ℃ DC Operating VCE=5V Life 7 IF=20mA High 85 Temperature / High Humidity Ee≦L×0.8 VF≦U 0/1 U :Upper specification 300 cycle 22 PCs 1000 hrs 22 PCs 0/1 1000 hrs 22 PCs 0/1 1000 hrs 22 PCs 0/1 ℃ / 85% R.H. 1000 hrs 22 PCs 0/1 Everlight Electronics Co., Ltd. http:\\www.everlight.com Device No Prepared date ：CDRX-810-010 22 PCs 5 min Storage 6 300 cycle 5 min 10 sec TEMP. : +100 0/1 15 min Thermal Shock L : -10 10 sec 22 PCs 15 min L : -40 3 Test Sample Failure Ac/R Hours/ Size Judgement e Cycle Criteria ：2006/12/29 limit L :the initial test value ：1 Rev Page ： 0/1 ：6 of 7 Prepared by Kunjiang Xie ITR8010 Packing Quantity Specification 1. 80PCS/1Plate,6Plates/1Boxe, 10Boxes/1Carton Label Form Specification CPN: Customer’s Production Number P/N : Production Number QTY: Packing Quantity CAT: Ranks HUE: Peak Wavelength REF: Reference ITR8010-F LOT No: Lot Number Notes 1. Above specification may be changed without notice. EVERLIGHT will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. These specification sheets include materials protected under copyright of EVERLIGHT corporation. Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT’s consent. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http:\\www.everlight.com Everlight Electronics Co., Ltd. http:\\www.everlight.com Device No Prepared date ：CDRX-810-010 ：2006/12/29 ：1 Rev Page ： ：7 of 7 Prepared by Kunjiang Xie