ELECTRONICS METRAL® 2 mm Modular Interconnect System www.fci.com/metral 1 TABLE OF CONTENTS 2 General information 3 Catalog Main set up 4 METRAL® core product selector most popular METRAL® connector selector 5 Product finder all products 9 Application selector various applications examples Signal connectors standard header header receptacle header receptacle header receptacle straight straight right angle straight right angle straight right angle 4 row - wide body 4 row - narrow body 4 row 5 row - wide body 5 row 8 row - wide body 8 row 24 28 32 40 42 48 50 Signal connectors reversed header header receptacle header receptacle right angle right angle straight right angle straight 4 row - wide body 4 row - narrow body 4 row 5 row - wide body 5 row 54 60 66 70 76 Shrouds 4 row - wide body 5 row - wide body 8 row - wide body Power connectors standard header header receptacle header receptacle straight straight right angle straight right angle 4 row - wide body 4 row - narrow body 4 row 5 row - wide body 5 row 90 94 98 104 108 Power connectors reversed header receptacle header receptacle right angle straight right angle straight 4 row - wide body 4 row 5 row - wide body 5 row 110 122 124 130 Electrical enhanced header shroud receptacle straight 5 row 5 row (5+2 row) 5 row 134 136 138 5 row 5 row 142 144 18 82 84 86 right angle Shielded connectors header round cable connector straight High power connector high power header high power receptacle 148 150 Hybrid connectors DIN standard high power Mini power DIN standard coax Mini coax 154 158 162 166 Cable connectors signal shielded 172 176 Accessories coding keys cable connector coding keys guide pin board-to-board keying system ramping module shorting clip end wall hybrid housing 180 182 184 186 188 190 194 196 Application specific monoblocks customized designs 200 200 Technical specification Futurebus IPCI Bus electrical specs 204 205 206 PCB- lay out pcb lay out recommendations 208 Application equipment 217 Part number index 224 www.fci.com/metral FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries,FCI is a leading manufacturer of connectors. Our 13,500 employees are commited to providing customers with high-quality, innovative products for a wide range of consumer and industrial applications. GENERAL INFORMATION The METRAL® connector range is the standard 2 mm board-to-board and cable-to-board interconnect system designed in accordance with IEC 61076-4-104 and Telcordia® GR-1217-CORE. Connector system used for chassis based packaging in the communications, data, medical and Industrial and Instrumentation segments. The METRAL® connector system is applicable for low speed and high speed transmission and switching equipment. Signals from 2 up to 5 Gbp/s used in backplanes, mid-planes, extension cards, power (3 up to 60 amps) and I/O applications. The Catalog presents the full range of METRAL® connectors, signal, (high) power, shielded, cable and hybrid connectors, all with various choices in dimensions, features and options. For a quick solution you can select one of the products out of the METRAL® core product selector, a selection of the most popular products out of the METRAL® family range. (see page 5 to 7) LIABILITY We believe that the information contained in this publication is the best currently available on the subject. It is offered as a possible helpful suggestion in any experimentation you may care to undertake and is subject to revision as additional knowledge and experience is gained. FCI makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patent. Information given on the drawings in this document is not suitable for tooling design and construction. To obtain the correct drawings for these purposes, contact your local FCI representative. www.fci.com/metral 3 METRAL® CONNECTORS Catalog Main set-up STANDARD CONNECTION Straight Header on backplane / motherboard Right Angle Receptacle on the daughter card Additional choices, 4 or 5 row and signal or power REVERSED CONNECTION Straight Receptacle on backplane / motherboard Right Angle Header on the daughter card Additional choices, 4 or 5 row and signal or power 4 www.fci.com/metral Receptacle Right Angle High Speed Header Straight Power Receptacle Right Angle Signal Header Straight High Speed Shroud Coding Keys Receptacle Right Angle Signal Guide Pin Receptacle Right Angle Power DIN power Cable Connector, 1 mod Mini Coax Pin-in-Paste Solutions Cable Connector, 2 mod Receptacle Straight Signal Header Straight Straight Signal METRAL® Core Product Selector Selection of the most popular connectors out of the METRAL® family www.fci.com/metral 5 METRAL® CORE PRODUCT SELECTOR Receptacle, Right angle, Signal Signal Standard solder to board pin in paste Press Fit Module 1 2 4 8 4 row 88945-102LF 88946-102LF 88947-102LF 88948-102LF 1 2 4 8 89035-102LF 89036-102LF 89037-102LF 89038-102LF 1 52048-101LF 5 row 89047-102LF 89093-102LF 89094-102LF 89095-102LF 8 row 74770-102LF - Header, Straight, Signal Press Fit, Wide body Module 1 2 4 8 4 row 70232-116LF 70233-116LF 70234-116LF 70235-116LF Solder to Board 85863-102LF 85864-102LF 85865-102LF 85866-102LF Wide body 52049-101LF Module 1 2 4 8 Signal Reversed Receptacle, Straight, Signal 4 row 70203-111LF 70203-112LF 70203-113LF 70203-114LF 5 row 89055-111LF 89055-112LF 89055-113LF 89055-114LF 8 row 98173-102LF - Header, Right angle, Signal solder to board Press Fit Wide Body Press Fit Module 4 row 5 row 1 2 4 8 85757-1101LF 85758-1101LF 85759-1101LF 85760-1101LF 85761-1101LF 85763-1101LF - Solder to Board 1 2 4 8 HM1S41FRR000H6PLF HM1S42FRR000H6PLF HM1S43FRR000H6PLF HM1S44FRR000H6PLF HM1S51FRR000H6PLF HM1S52FRR000H6PLF HM1S53FRR000H6PLF HM1S54FRR000H6PLF Module 4 row 5 row 1 2 4 8 HM1L41LDP000H6PLF HM1L42LDP000H6PLF HM1L43LDP000H6PLF HM1L44LDP000H6PLF HM1L51LDP000H6PLF HM1L52LDP000H6PLF HM1L53LDP000H6PLF HM1L54LDP000H6PLF 1 2 4 8 HM1L41LAP000H6PLF HM1L42LAP000H6PLF HM1L43LAP000H6PLF HM1L44LAP000H6PLF 1 HM1L41LFP000H6PLF Solder to Board Wide Body solder to board HM1L51LAP000H6PLF HM1L52LAP000H6PLF HM1L53LAP000H6PLF HM1L54LAP000H6PLF Pin in Paste Wide Body Receptacle, Right angle, Power Power Standard 8 row 74771-102011LF - Shroud Pin in Paste HM1L51LFP000H6PLF Header, Straight, Power pin in paste Press Fit Module 1 4 row 88949-102LF 5 row 89096-102LF Solder to Board 1 89039-101LF 85876-102LF Pin in Paste 1 6 5 row 89006-116LF 89007-116LF 89008-116LF 89009-116LF 72651-101LF 63793-101LF www.fci.com/metral Press Fit, Wide Body Module 1 4 row 70236-101LF 5 row 89099-111LF Extended Coding Keys Accessories Guide Pin Guide Pin short, single-sided long , single-sided 70295-001LF 70295-002LF Required Header housing Wide Body Required Receptacle housing 88911-101LF 70292-101LF Colour Blue Pink Green High Speed Header, Straight, Signal, High Speed Signal 1000 Signal 2000 Signal 4000 Receptacle 85814-101LF 85814-102LF 85812-101LF Receptacle, Right Angle, High Speed 1 Module, High Speed, Press Fit 5 row 84817-101001LF 74977-101002LF 55003-101004LF Header 85813-101LF 85813-102LF 85811-101LF 1 Module, High Speed, Press Fit 8 row 74983-102011LF 74978-102001LF 55004-102002LF Signal 1000 Signal 4000 5 row 73981-102LF 52057-102LF 8 row 74981-102LF - 1000 Series Header 2000 Series Header 4000 Series Header 622Mb/s 1.25 Gb/s 1.25 Gb/s 2.5 Gb/s 2.5 Gb/s 5 Gb/s 1000 Series Receptacle 4000 Series Receptacle DIN Standard High Power Receptacle RA housing 89092-101LF Receptacle contact 85995-103LF Housing wide body 88911-101LF Contact screw pcb 91570-001LF Mini Coax Receptacle RA housing 70244-102LF Receptacle contact stb 70239-002LF Housing wide body 88913-101LF Contact stb 88980-002LF FINISHED PLATED HOLE Pin in Paste Cable Connectors Hybrid connectors Cable Connector, Signal SQUEEGEE STENCIL 1 4 row 72476-1111LF 72477-1111LF 5 row 72478-1111LF 72479-1111LF Cable Connector, Shielded positions 72 4 row 10013881-231LF SOLDER PASTE 2 3 COMPONENT ASSEMBLED 4 Module 1 2 SOLDER PASTE REFLOW SOLDERED 5 Description 4 row 5 row Receptacle, RA, Signal 52048-101LF 52049-101LF Receptacle, RA, Power 63793-101LF HM1L51LFP000H6PLF Header, RA, Signal 58361-101LF HM1K41DFP000H6PLF HM1K51DFP000H6PLF Header, RA, Power 72850-101LF - www.fci.com/metral 7 8 www.fci.com/metral METRAL® PRODUCT FINDER METRAL® PRODUCT FINDER Easy acces to select product Diversity on application examples www.fci.com/metral 9 METRAL® PRODUCT FINDER METRAL® SIGNAL CONNECTORS STANDARD housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header Straight STB Signal wide body 4x6 4 x 12 4 x 24 4 x 48 24 Header Straight PF Signal wide body 4x6 4 x 12 4 x 24 4 x 48 26 Header Straight STB Signal narrow body 4x6 28 Header Straight PF Signal narrow body 4x6 30 Receptacle RA STB Signal - 4x6 4 x 12 4 x 24 4 x 48 32 Receptacle RA PF Signal - 4x6 4 x 12 4 x 24 4 x 48 34 Receptacle RA PIP Signal - 4x6 36 Header Straight STB Signal wide body 5x6 38 Header Straight PF Signal wide body 5x6 5 x 12 5 x 24 5 x 48 40 Receptacle RA STB Signal - 5x6 5 x 12 5 x 24 5 x 48 42 Receptacle RA PF Signal - 5x6 5 x 12 5 x 24 5 x 48 44 Receptacle RA PIP Signal - 5x6 Header Straight PF Signal wide body 8 x 12 48 Receptacle RA PF Signal - 8 x 12 50 RA = right angle, STB = solder-to-board, PF = press-fit 10 www.fci.com/metral 46 METRAL® PRODUCT FINDER METRAL® SIGNAL CONNECTORS REVERSED housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header RA STB Signal wide body 4x6 4 x 12 4 x 24 4 x 48 54 Header RA PF Signal wide body 4x6 4 x 12 4 x 24 4 x 48 56 Header RA PIP Signal wide body 4x6 58 Header RA STB Signal narrow body 4x6 60 Header RA PF Signal narrow body 4x6 62 Header RA PIP Signal narrow body 4x6 64 Receptacle Straight STB Signal - 4x6 4 x 12 4 x 24 4 x 48 66 Receptacle Straight PF Signal - 4x6 4 x 12 4 x 24 4 x 48 68 Header RA STB Signal wide body 5x6 5 x 12 5 x 24 5 x 48 70 Header RA PF Signal wide body 5x6 5 x 12 5 x 24 5 x 48 72 Header RA PIP Signal wide body 5x6 Receptacle Straight STB Signal - 5x6 Receptacle Straight PF Signal - 5x6 74 5 x 12 5 x 24 5 x 48 5 x 24 76 78 RA = right angle, STB = solder-to-board, PF = press-fit METRAL® SHROUDS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Shroud - - - wide body 4x6 4 x 12 4 x 24 4 x 48 82 Shroud - - - wide body 5x6 5 x 12 5 x 24 5 x 48 84 Shroud - - wide body www.fci.com/metral 8 x 12 86 11 METRAL® PRODUCT FINDER METRAL® POWER CONNECTORS STANDARD housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header Straight STB Power wide body 4x2 90 Header Straight PF Power wide body 4x2 92 Header Straight STB Power narrow body 4x2 94 Header Straight PF Power narrow body 4x2 96 Receptacle RA STB Power - 4x2 98 Receptacle RA PF Power - 4x2 100 Receptacle RA PIP Power - 4x2 102 Header Straight STB Power wide body 5x2 104 Header Straight PF Power wide body 5x2 106 Receptacle RA STB Power - 5x2 108 Receptacle RA PF Power - 5x2 110 Receptacle RA PIP Power - 5x2 112 RA = right angle, STB = solder-to-board, PF = press-fit 12 www.fci.com/metral METRAL® PRODUCT FINDER METRAL® POWER CONNECTORS REVERSED housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header RA STB Power wide body 4x2 116 Header RA PF Power wide body 4x2 118 Header RA PIP Power wide body 4x2 120 Receptacle Straight STB Power - 4x2 122 Header RA STB Power wide body 5x2 124 Header RA PF Power wide body 5x2 126 Header RA PIP Power wide body 5x2 128 Receptacle Straight STB Power - 5x2 130 RA = right angle, STB = solder-to-board, PF = press-fit METRAL® ELECTRICAL ENHANCED CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header Straight PF Signal wide body 5+2 134 Shroud - - - wide body 5+2 136 Receptacle RA PF Signal - 5+2 138 RA = right angle, STB = solder-to-board, PF = press-fit www.fci.com/metral 13 METRAL® PRODUCT FINDER METRAL® SHIELDED SIGNAL CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header Straight STB Cable connector Signal shielded 5x6 142 Signal shielded 5x6 144 RA = right angle, STB = solder-to-board, PF = press-fit METRAL® HIGH POWER CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header RA PF Power high power 1x2 2x2 148 Receptacle Straight PF Power high power 1x2 2x2 150 RA = right angle, STB = solder-to-board, PF = press-fit 14 www.fci.com/metral METRAL® PRODUCT FINDER METRAL® HYBRID CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines Header DIN standard Straight - Power high power 1 154 Receptacle DIN standard RA - Power high power 1 156 Header Mini Power RA/ Straight Power mini power 6 158 Receptacle Mini power RA - Power mini power 6 160 Header DIN standard Straight - Coax coax 1 162 Receptacle DIN standard RA - Coax coax 1 164 Header Mini Coax RA/ Straight Coax mini coax 6 166 Receptacle Mini Coax RA Coax mini coax 6 168 - RA = right angle, STB = solder-to-board, PF = press-fit www.fci.com/metral 15 METRAL® PRODUCT FINDER METRAL® CABLE CONNECTORS housing size product description 12 mm 24 mm 48 mm 96 mm page number of lines 16 Cable Connector - - Signal - 4x6 4 x 12 172 Cable Connector - - Signal - 5x6 5 x 12 174 Cable Connector - - Signal Shielded www.fci.com/metral 3 x 24 176 METRAL® PRODUCT FINDER METRAL® ACCESSORIES housing size product description 12 mm 24 mm 48 mm 96 mm page - 180 182 number of lines Coding Keys Header Cable conn. - - - - - Guide Pin - - - - 1 184 Board to Board Keying system - - - - 6 186 Ramping module - - - - 1 188 Shorting Clip Header Straight PF Signal wide body - 4 x 12 4 x 24 4 x 48 190 Shorting Clip Header Straight PF Signal wide body 5x6 - - - 192 End wall - - - - Hybrid Housing - - 194 1 196 RA = right angle, STB = solder-to-board, PF = press-fit www.fci.com/metral 17 METRAL® APPLICATION EXAMPLES METRAL® 4 row assemblies UNMATED 18 MATED www.fci.com/metral METRAL® APPLICATION EXAMPLES METRAL® 5 row assemblies UNMATED MATED www.fci.com/metral 19 METRAL® APPLICATION EXAMPLES METRAL® 8 row assemblies UNMATED MATED METRAL® DIN High Power assemblies UNMATED MATED 91570 88977 70424 (kit) wide body 88911 narrow body 70290 70201 20 www.fci.com/metral METRAL® APPLICATION EXAMPLES METRAL® DIN standard Coax assemblies UNMATED MATED 89092 wide body 88911 narrow body 70290 93904 70200 METRAL® Mini Power assemblies UNMATED MATED 85973 88982 85975 wide body 88911 narrow body 70290 70244 85976 85972 METRAL® Mini Coax assemblies UNMATED MATED 88978 88982 89030 wide body 88913 narrow body 70243 70244 70239 88971 www.fci.com/metral 21 22 www.fci.com/metral SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, straight, wide body Header, 4 row, straight, narrow body Receptacle, 4 row, right angle Header, 5 row, straight, wide body Header, 5 row, straight, narrow body Receptacle, 5 row, right angle Header, 8 row, straight, wide body Receptacle, 8 row, right angle www.fci.com/metral 23 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, signal, straight, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. TECHNICAL DATA PHYSICAL MATING DATA spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO Receptacle, right angle, press-fit, page 34 1 mod – part number 88945-102LF 2 mod – part number 88946-102LF 4 mod – part number 88947-102LF 8 mod – part number 88948-102LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 32 1 mod – part numbers 89035-102LF 2 mod – part numbers 89036-102LF 4 mod – part numbers 89037-102LF 8 mod - part numbers 89038-102LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm Receptacle, right angle, Pin-in-Paste, page 36 1 mod – part numbers 52048-101LF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 24 www.fci.com/metral PRODUCT 11.93 2 1.4 1 Module 88951-1yyLF 10 1 17 3.45 2.3 6 D C B A 6 11.5 15.8 0.5 2 B 2 23.93 SIGNAL CONNECTORS Header, 4 row, signal, straight, solder to board, wide body A 2 Module 88952-1yyLF 47.93 4 Module 88953-1yyLF 95.93 8 Module 88954-1yyLF PCB pattern P5, see chapter PCB layouts PARTNUMBERS 8895x - 1yyLF Base Part Number 88951 = 1 module (4 x 6 pos.) 88952 = 2 module (4 x 12 pos.) 88953 = 4 module (4 x 24 pos.) 88954 = 8 module (4 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length(B) 01 5,00 mm 4,25 mm 05 6,50 mm 4,25 mm 31 5,00 mm 3,30 mm 35 6,50 mm 3,30 mm 61 5,00 mm 2,65 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 25 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, signal, straight, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 34 1 mod – part number 88945-102LF 2 mod – part number 88946-102LF 4 mod – part number 88947-102LF 8 mod – part number 88948-102LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 32 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) 1 mod – part numbers 89035-101LF 2 mod – part numbers 89036-101LF 4 mod – part numbers 89037-101LF 8 mod - part numbers 89038-101LF Receptacle right angle, Pin-in-Paste, page 36 press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers 52048-101LF ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION Applicable process: press-fit REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223. 26 www.fci.com/metral PRODUCT 11.93 1 6 1 1 Module 70232-1yyLF 6 10 2 17 3.45 6 2.30 D C B A 2 1.4 SIGNAL CONNECTORS Header, 4 row, signal, straight, press-fit, wide body 15.80 11.50 0.5 2 A 1 23.93 B 12 2 Module 70233-1yyLF 1 47.93 24 4 Module 70234-1yyLF 95.93 1 48 8 Module 70235-1yyLF PCB pattern P6, see chapter PCB layouts PARTNUMBERS 7023x - 1yyLF Base Part Number 70232 = 1 module (4 x 6 pos.) 70233 = 2 module (4 x 12 pos.) 70234 = 4 module (4 x 24 pos.) 70235 = 8 module (4 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 11 5,00 mm 4,30 mm 16 5,75 mm 4,30 mm 15 6,50 mm 4,30 mm 21 5,00 mm 13,60 mm 26 5,75 mm 13,60 mm 25 6,50 mm 13,60 mm A B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 27 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, signal, straight, solder to board, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight ELECTRICAL 1 mod – pf - part number 85757-1101LF, 1 mod – stb - part nr HM1S41FRR000H6PLF, current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 mod – pf - part number 88945-102LF, 1 mod – stb -part number 89035-102LF, 1 mod – pip - part number 52048-101LF, ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 28 page 69 page 67 www.fci.com/metral page 35 page 33 page 37 SIGNAL CONNECTORS Header, 4 row, signal, straight, solder to board, narrow body PRODUCT 1.4 1 Module 70264-1yyLF 6 15.9 10 2 3.5 6 1 D C B 2 13.8 11.5 A 0.50 B A 11.92 PCB pattern P3, see chapter PCB layouts PARTNUMBERS 70264 - 1yyLF Base Part Number 70264 = 1 module (4 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 5,00 mm 4,25 mm 05 6,50 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 29 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 4 row, signal, straight, press-fit, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. Eye the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 mod – pf - part number 85757-1101LF, 1 mod – stb - part nr HM1S41FRR000H6PLF, Receptacle, right angle MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) 1 mod – pf - part number 88945-102LF, 1 mod – stb -part number 89035-102LF, 1 mod – pip - part number 52048-101LF, press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 30 page 69 page 67 www.fci.com/metral page 35 page 33 page 37 SIGNAL CONNECTORS Header, 4 row, signal, straight, press-fit, narrow body PRODUCT 10 1.4 1 Module 85826-1yyLF 6 15.9 2 1 6 D 2 C B A 11.5 13.8 0.5 A B 3.5 11.92 PCB pattern P4, see chapter PCB layouts PARTNUMBERS 85826 - 1yyLF Base Part Number 85826 = 1 module (4 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 5,00 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 31 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 4 row, signal, right angle, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density (200 contacts per 100mm connector length) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Reliable dual beam box contact Stable PCB fixation device Low profile allows PCB spacing of 14mm TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 27 1 module – part number 70232-116LF 2 modules – part number 70233-116LF 4 modules – part number 70234-116LF 8 modules – part number 70235-116LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Headerstraight, solder-to-board, page 25 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Recommended hole diameter: 0,65 – 0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC 1 module – part number 88951-101LF 2 modules – part number 88952-101LF 4 modules – part number 88953-101LF 8 modules – part number 88954-101LF TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Press-peg application, TA-0941 product specification.: GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 32 www.fci.com/metral PRODUCT 11.95 21.14 10 6 1 Module 89035-1yyLF SIGNAL CONNECTORS Receptacle, 4 row, signal, right angle, solder to board 12.44 2 1 D C B 11.3 A B 2.98 1.5 23.95 1 22 2 Module 89036-1yyLF 12 4 1 D C B 4 2 A 2 4 9.50 6 47.95 4 Module 89037-1yyLF 24 46 1 D C B A 95.95 94 8 Module 89038-1yyLF 48 1 D C B A PCB pattern P1, see chapter PCB layouts PARTNUMBERS 8903x - 1yyLF Base Part Number 89035 = 1 module (4 x 6 pos.) 89036 = 2 module (4 x 12 pos.) 89037 = 4 module (4 x 24 pos.) 89038 = 8 module (4 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 2,90 mm 1,60 mm 12 3,53 mm 2,40 mm www.fci.com/metral B 33 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 4 row, signal, right angle, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density (200 contacts per 100mm connector length) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Reliable dual beam box contact Stable PCB fixation device Press block ensures accurate position of press-fit tails for easy mounting Eye the needle press-fit contact Low profile allows PCB spacing of 14mm TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 27 1 module – part number 70232-116LF 2 modules – part number 70233-116LF 4 modules – part number 70234-116LF 8 modules – part number 70235-116LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, straight, solder-to-board, page 25 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 module – part number 88951-101LF 2 modules – part number 88952-101LF 4 modules – part number 88953-101LF 8 modules – part number 88954-101LF TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Press-peg application, TA-0941 product specification.: GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 34 www.fci.com/metral PRODUCT SIGNAL CONNECTORS Receptacle, 4 row, signal, right angle, press fit 21.15 12.44 11.95 10 2 11.3 1 Module 88945-1yyLF B 1.5 23.95 22 4 2 4 2 Module 88946-1yyLF 2 4 9.5 6 47.95 46 4 Module 88947-1yyLF 95.95 94 8 Module 88948-1yyLF PCB pattern P1, see chapter PCB layouts PARTNUMBERS 8894x - 1yyLF Base Part Number 88945 = 1 module (4 x 6 pos.) 88946 = 2 module (4 x 12 pos.) 88947 = 4 module (4 x 24 pos.) 88948 = 8 module (4 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 2,90 mm 1,60 mm 12 3,53 mm 2,40 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 35 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 4 row, signal, right angle, pin-in-paste FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density, 1 module (4 x 6 positions) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Tuning fork, forced controlled contact Stable PCB fixation device Low profile allows PCB spacing of 14mm MATING DATA TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 27 1 module – part number 70232-116LF Header, straight, solder-to-board, page 25 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 module – part number 88951-101LF MECHANICAL PERFORMANCE Maximum mounting force, 20 N per connector insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Recommended hole diameter: 0,65 – 0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature -55˚C to + 125˚C Max. temperature 260˚C for 30 seconds RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Tape&reel PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification GS-12-215 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 36 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 4 row, signal, right angle, pin-in-paste PRODUCT 20.75 10 2 8.05 2.2 9.3 8.8 B 2.1 11.9 10 2 5 2 9.5 4 6 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 52048 - 1yyLF Base Part Number 52048 = 1 module (4 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 01 2,80 mm 1,60 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 37 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 5 row, signal, straight, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 45 1 mod – part number 89047-102LF 2 mod – part number 89093-102LF 4 mod – part number 89094-102LF 8 mod – part number 89095-102LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 43 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC 1 mod – part numbers 85863-102LF 2 mod – part numbers 85864-102LF 4 mod – part numbers 85865-102LF 8 mod - part numbers 85866-102LF TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 38 www.fci.com/metral PRODUCT 2 11.93 1 2 1 Module 74741-1yyLF 10 17 2.3 3.45 6 E D C B A 8 13.5 SIGNAL CONNECTORS Header, 5 row, signal, straight, solder to board, wide body 17.8 0.5 1.4 2 B A 23.93 2 Module 7474x-1yyLF on request only 47.93 4 Module 7474x-1yyLF on request only 95.93 8 Module 7474x-1yyLF on request only PCB pattern P16, see chapter PCB layouts PARTNUMBERS 74741 - 1yyLF Base Part Number 74741 on request only on request only on request only = 1 module (5 x 6 pos.) = 2 module (5 x 12 pos.) = 4 module (5 x 24 pos.) = 8 module (5 x 48 pos.) Performance Pin Configuration LF LF = lead free 1 = Telcordia CO yy mating length (A) tail length (B) 63 5,00 mm 4,25 mm 01 6,50 mm 4,25 mm 79 5,00 mm 3,30 mm 31 6,50 mm 3,30 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 39 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 5 row, signal, straight, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+). 5 Rows and 2 mm pitch permit high signal density (200 contacts per 100 mm connector length). Stackable end-to-end without loss of positions. Stackable with other METRAL™ function modules (e.g. power, coax, guide pin). First Make Last Break options. Eye the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 45 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 mod – part number 89047-102LF 2 mod – part number 89093-102LF 4 mod – part number 89094-102LF 8 mod – part number 89095-102LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC Receptacle, right angle, solder-to-board, page 43 1 mod – part numbers 85863-102LF 2 mod – part numbers 85864-102LF 4 mod – part numbers 85865-102LF 8 mod - part numbers 85866-102LF TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA product specification.: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 40 www.fci.com/metral PRODUCT 11.93 1.40 1 Module 89006-1yyLF 8.00 1 2 2 10 17 6 SIGNAL CONNECTORS Header, 5 row, signal, straight, press-fit, wide body 3.45 2.30 E D C B A 13.50 17.80 0.50 2 1 23.93 A B 12 2 Module 89007-1yyLF 47.93 1 24 4 Module 89008-1yyLF 95.93 48 1 8 Module 89009-1yyLF PCB pattern P7, see chapter PCB layouts PARTNUMBERS 8900x - 1yyLF Base Part Number 89006 = 1 module (5 x 6 pos.) 89007 = 2 module (5 x 12 pos.) 89008 = 4 module (5 x 24 pos.) 89009 = 8 module (5 x 48 pos.) Performance Pin Configuration 1 = Telcordia CO LF LF = lead free yy mating length (A) tail length (B) 11 5,00 mm 4,30 mm 16 5,75 mm 4,30 mm 15 6,50 mm 4,30 mm 21 5,00 mm 13,60 mm 26 5,75 mm 13,60 mm 25 6,50 mm 13,60 mm row A = 5,00 mm 4,30 mm first-make last-brake 44 row B = 6,50 mm 4,30 mm row C = 7,25 mm 4,30 mm row D = 6,50 mm 4,30 mm row E = 5,00 mm 4,30 mm A B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 41 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 5 row, signal, right angle, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density (250 contacts per 100 mm connector length) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Reliable dual beam box contact Stable PCB fixation device TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Header straight, press-fit, page 41 1 module – part number 89006-116LF 2 modules – part number 89007-116LF 4 modules – part number 89008-116LF 8 modules – part number 89009-116LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header straight, solder-to-board, page 39 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Recommended hole diameter: 0,65 – 0,80 mm 1 module – part number 74741-101LF 2 modules – on request only 4 modules – on request only 8 modules – on request only ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Press-peg application, TA-0941 product specification.: GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 42 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 5 row, signal, right angle, solder to board PRODUCT 6 1 Module 85863-1yyLF 11.95 1 6 5 E D C B A 12 2 Module 85864-1yyLF 23.95 1 E D C B A 24 4 Module 85865-1yyLF 2 1 E D C B A 47.95 1 E D C B A 95.95 48 8 Module 85866-1yyLF 1 E D C B A PCB pattern P2, see chapter PCB layouts PARTNUMBERS 8586x - 1yyLF Base Part Number 85863 = 1 module (5 x 6 pos.) 85864 = 2 module (5 x 12 pos.) 85865 = 4 module (5 x 24 pos.) 85866 = 8 module (5 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 2,90 mm 1,60 mm 12 3,53 mm 2,40 mm www.fci.com/metral B 43 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 5 row, signal, right angle, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density (250 contacts per 100 mm connector length) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Reliable dual beam box contact Stable PCB fixation device Press block ensures accurate position of press-fit tails for easy mounting Eye the needle press-fit contact TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header straight, press-fit, page 41 1 module – part number 89006-116LF 2 modules – part number 89007-116LF 4 modules – part number 89008-116LF 8 modules – part number 89009-116LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header straight, solder-to-board, page 39 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 module – part number 74741-101LF 2 modules – on request only 4 modules – on request only 8 modules – on request only TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Press-peg application, TA-0941 product specification.: GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223. 44 www.fci.com/metral PRODUCT 6 1 Module 89047-1yyLF 11.95 SIGNAL CONNECTORS Receptacle, 5 row, signal, right angle, press fit 23.15 1 2 E D 11.35 C B A B 3.08 1.50 12 2 Module 89093-1yyLF 23.95 1 E D C B A 2 24 4 Module 89094-1yyLF 4 47.95 1 8 E 9.5 D C B A 95.95 48 8 Module 89095-1yyLF 1 E D C B A PCB pattern P2, see chapter PCB layouts PARTNUMBERS 8904x - 1yyLF Base Part Number 89047 = 1 module (5 x 6 pos.) 89093 = 2 module (5 x 12 pos.) 89094 = 4 module (5 x 24 pos.) 89095 = 8 module (5 x 48 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 2,90 mm 1,60 mm 12 3,53 mm 2,40 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 45 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 5 row, signal, right angle, pin-in-paste FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density, 1 module (5 x 6 positions) Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Tuning fork, forced controlled contact Stable PCB fixation device Low profile allows PCB spacing of 14mm TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 41 1 module – part number 89006-116LF Header, straight, solder-to-board, page 39 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 module – part number 74741-101LF MECHANICAL PERFORMANCE Maximum mounting force, 20 N per connector insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Recommended hole diameter: 0,65 – 0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C Max. temperature 260˚C for 30 seconds RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Tape&reel PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification GS-12-215 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 46 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 5 row, signal, right angle, pin-in-paste PRODUCT 2 22.75 10 2.2 10.05 11.3 10.8 2.1 B 11.9 10 2 9.5 5 2 4 8 PCB pattern P2, see chapter PCB layouts PARTNUMBERS 52049 - 101LF Base Part Number 52049 = 1 module (5 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 01 2,80 mm 1,60 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 47 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Header, 8 row, signal, straight, press fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 8 row and 2 mm pitch permit high signal density ( 800 contacts per 100mm connector length) 2 modules header, 8 rows by 6 position Baby H-shape press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 51 part number 74770-102LF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA product specification.: GS-12-134 application specification: GS-20-010 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 48 www.fci.com/metral SIGNAL CONNECTORS Header, 8 row, signal, straight, press fit, wide body PRODUCT 23.88 17 2.3 A 22 24.15 20.35 B 3.4 PCB pattern P21, see chapter PCB layouts PARTNUMBERS 74771 - 102011LF Base Part Number 74771 = 8 row straight header Performance 1 = Telcordia CO Pin Configuration Pin Configuration LF 02 = 2 modules, 8x12 pos. LF = lead free yyy mating length (A) tail length (B) 011 6,50 mm 17,10 mm A B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 49 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS STANDARD Receptacle, 8 row, signal, right angle, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 8 row and 2 mm pitch permit high signal density ( 800 contacts per 100mm connector length) 2 modules header, 8 rows by 6 position Eye of the needle press-fit contact Tuning fork, forced controlled contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, press-fit, page 49 part number 74771-102011LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA product spec.: GS-12-134 application specification: GS-20-010 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 50 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 8 row, signal, right angle, press fit PRODUCT 2 29.4 23.98 20.7 16 16.8 20.20 B A B C D E F G H 5.6 2 9.5 PCB pattern P22, see chapter PCB layouts PARTNUMBERS 74770 - 102LF Base Part Number 74770 = 2 module (8 x 12 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy tail length (B) PCB thickness 02 3,53 mm 1,30 to 3,40 mm B Note: blue marked in pin configuration is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 51 SIGNAL CONNECTORS 52 www.fci.com/metral SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, right angle, wide body Header, 4 row, right angle, narrow body Receptacle, 4 row, straight Header, 5 row, right angle, wide body Header, 5 row, right angle, narrow body Receptacle, 4 row, straight www.fci.com/metral 53 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL 1 mod – part number 85757-1101LF 2 mod – part number 85758-1101LF 4 mod – part number 85759-1101LF 8 mod – part number 85760-1101LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 67 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers HM1S41FRR000H6PLF 2 mod – part numbers HM1S42FRR000H6PLF 4 mod – part numbers HM1S43FRR000H6PLF 8 mod - part numbers HM1S44FRR000H6PLF ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: trays PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 54 www.fci.com/metral PRODUCT 11.98 1 1 Module 6 B A 31.86 3.5 A D C 2 15.8 11.5 6 SIGNAL CONNECTORS Header, 4 row, signal, right angle, solder to board, wide body 9.35 B 2 4 10 1 2 7.5 23.98 12 6 17 D C B 2 Module A 10.86 47.98 1 24 D C B A 4 Module 95.98 1 48 D C B A 8 Module PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1L4 x LAP000H6PLF Base Part Number HM1 Type no. of rows no. of pos. Configuration 000 Performance 4 = 4 row L = Signal header right angle, wide body Packaging H6 = Telcordia CO LAP = solder to board 1 = 1 module (4 x 6 pos.) 2 = 2 module (4 x 12 pos.) 3 = 4 module (4 x 24 pos.) 4 = 8 module (4 x 48 pos.) mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness A LF LF = lead free P = trays B Note: For other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 55 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, press fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, press-fit, page 69 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 mod – part number 85757-1101LF 2 mod – part number 85758-1101LF 4 mod – part number 85759-1101LF 8 mod – part number 85760-1101LF Receptacle, solder-to-board, page 67 1 mod – part numbers HM1S41FRR000H6PLF 2 mod – part numbers HM1S42FRR000H6PLF 4 mod – part numbers HM1S43FRR000H6PLF 8 mod - part numbers HM1S44FRR000H6PLF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION press-fit REFERENCE DATA Product specification: GS-12-445 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 56 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row, signal, right angle, press fit, wide body 31.86 PRODUCT 11.98 1 D C B 1 Module A 6 2 A 15.8 6 3.5 9.35 11.5 B 2 10 7.5 4 2 6 23.98 1 12 17 D C B 2 Module A 10.86 1 47.98 24 D C B 4 Module A 95.98 48 1 8 Module D C B A PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1L4 x LDP000H6PLF Base Part Number HM1 Type no. of rows 4 = 4 row L = Signal header right angle, wide body no. of pos. Configuration 000 Performance LDP = Press fit Packaging H6 = Telcordia CO mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness LF LF = lead free A P = trays B 1 = 1 module (4 x 6 pos.) 2 = 2 module (4 x 12 pos.) 3 = 4 module (4 x 24 pos.) 4 = 8 module (4 x 48 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 57 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row,signal, right angle, pin-in-paste, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL 1 mod – part number 85757-101LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 67 1 mod – part numbers HM1S41FRR000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 58 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row,signal, right angle, pin-in-paste, wide body PRODUCT 3.5 11.95 1 6 D C B A 2 15.8 11.5 6 9.35 B 2 2 A 10 6 7.5 4 17 10.86 33 PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1L4 x LFP000H6PLF Base Part Number HM1 Type no. of rows 4 = 4 row L = Signal header right angle, wide body no. of pos. Configuration 000 Performance LFP = Pin-in-Paste mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B 1 = 1 module (4 x 6 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 59 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, solder to board, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility Narrow body housing TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL 1 mod – part number 85757-1101LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 67 1 mod – part numbers HM1S41FRR000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 60 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row, signal, right angle, solder to board, narrow body PRODUCT 11.95 1 7.5 6 D C B A 2 13.8 11.5 6 9.35 B 2 A 10 3.5 4 2 6 15.9 10.86 30.76 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 85822 - 1yyLF Base Part Number 85822 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 5,00 mm 2,90 mm 05 5,75 mm 2,90 mm 10 5,75 mm 3,70 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 61 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, press fit, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density ( 250 contacts per 100mm connector length) Modular design guarantees flexibility Narrow body housing Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 mod – part number 85757-1101LF Receptacle, straight, solder-to-board, page 67 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) 1 mod – part numbers HM1S41FRR000H6PLF press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification: GS-12-445 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 62 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row, signal, right angle, press fit, narrow body PRODUCT 7.5 11.95 1 6 D C B 2 A 13.8 6 9.35 11.5 B 2 3.5 2 4 A 10 6 15.9 10.86 30.76 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 58363 - 1yyLF Base Part Number 58363 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 5,00 mm 2,90 mm 05 5,75 mm 2,90 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 63 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 4 row, signal, right angle, pin-in-paste, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density ( 200 contacts per 100mm connector length) Modular design guarantees flexibility Narrow body housing TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 69 ELECTRICAL 1 mod – part number 85757-1101LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 67 1 mod – part numbers HM1S41FRR000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tape&reel PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 64 www.fci.com/metral SIGNAL CONNECTORS Header, 4 row, signal, right angle, pin-in-paste, narrow body PRODUCT 11.95 1 6 D C B 2 A 13.8 6 9.35 11.5 B 2 A 10 3.5 2 4 7.5 6 12 15.9 10.86 31.9 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 58361 - 101LF Base Part Number 58361 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free A yy mating length (A) tail length (B) 01 5,75 mm 2,90 mm B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 65 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Receptacle, 4 row, signal, straight, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density (200 contacts per 100mm connector length) Modular design guarantees flexibility Parallel board applications Tuning fork contact TECHNICAL DATA MATING DATA PHYSICAL Header, right angle, press-fit, page 57 spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO 1 module-part number HM1L41LDP000H6PLF 2 module-part number HM1L42LDP000H6PLF 4 module-part number HM1L43LDP000H6PLF 8 module-part number HM1L44LDP000H6PLF Header, right angle, solder-to-board, page 55 ELECTRICAL 1 module-part number HM1L41LAP000H6PLF 2 module-part number HM1L42LAP000H6PLF 4 module-part number HM1L43LAP000H6PLF 8 module-part number HM1L44LAP000H6PLF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, right angle, Pin-in-Paste, page 59 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 module-part number HM1L41LFP000H6PLF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-448 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 66 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 4 row, signal, straight, solder to board PRODUCT 11.98 2.05 1 Module 6 2 8.8 B 11.3 14.3 23.98 2 Module 10 2 47.98 4 Module 95.98 8 Module PCB pattern P5, see chapter PCB layouts PARTNUMBERS HM1S4 x FRR000H6PLF Base Part Number HM1 Type S = signal receptacle straight no. of rows 4 = 4 row no. of pos. Configuration 000 FRR = solder to board Performance Packaging H6 = Telcordia CO LF LF = lead free tail length (B) 3,30 mm B P = trays 1 = 1 module (4 x 6 pos.) 2 = 2 module (4 x 12 pos.) 3 = 4 module (4 x 24 pos.) 4 = 8 module (4 x 48 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 67 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Receptacle, 4 row, signal, straight, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row and 2 mm pitch permit high signal density (200 contacts per 100mm connector length) Modular design guarantees flexibility Parallel board applications Tuning fork contact Baby H-shape press-fit contact Flat rock design; can pressed on PCB with flat press block MATING DATA Header, right angle, press-fit, page 57 1 module-part number HM1L41LDP000H6PLF 2 module-part number HM1L42LDP000H6PLF 4 module-part number HM1L43LDP000H6PLF 8 module-part number HM1L44LDP000H6PLF TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, right angle, solder-to-board, page 55 ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, right angle, Pin-in-Paste, page 59 1 module-part number HM1L41LAP000H6PLF 2 module-part number HM1L42LAP000H6PLF 4 module-part number HM1L43LAP000H6PLF 8 module-part number HM1L44LAP000H6PLF 1 module-part number HM1L41LFP000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) TYPICAL APPLICATIONS press-fit contact insertion: 100 N max. per pin press-fit pin withdrawal: 20 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification: GS-12-447 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 68 www.fci.com/metral SIGNAL CONNECTORS Receptacle, 4 row, signal, straight, press fit PRODUCT 11.95 6 1.3 D 1 Module 14.3 0.5 1 C B B 2 11.3 A 2 6 23.95 12 1 D 2 Module C B 10 A 2 47.95 24 1 D C 4 Module B A 95.95 48 1 D C 8 Module B A PCB pattern P6, see chapter PCB layouts PARTNUMBERS 8575x - 1y01LF Base Part Number 85757 = 1 module (4 x 6 pos.) 85758 = 2 module (4 x 12 pos.) 85759 = 4 module (4 x 24 pos.) 85760 = 8 module (4 x 48 pos.) Performance Tail length 1 = Telcordia CO Pin Configuration LF 01 = fully loaded y tail length (B) 1 4,3 mm 2 13,6 mm 3 17,1 mm LF = lead free B Note: blue marked in tail length is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 69 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 5 row, signal, right angle, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density ( 250 contacts per 100mm connector length) Modular design guarantees flexibility TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, straight, press-fit, page 79 ELECTRICAL 1 mod – part number 85761-1101LF 2 mod – on request only 4 mod – part number 85763-1101LF 8 mod – on request only current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 77 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers HM1S51FRR000H6PLF 2 mod – part numbers HM1S52FRR000H6PLF 4 mod – part numbers HM1S53FRR000H6PLF 8 mod - part numbers HM1S54FRR000H6PLF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION applicable soldering process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 70 www.fci.com/metral PRODUCT 11.98 1 1 Module 17 A 2 6 E D C B A 17.8 8 11.35 13.5 2 2 Module 23.98 4 35 12 B 2 3.5 7.5 10 1 SIGNAL CONNECTORS Header, 5 row, signal, right angle, solder to board, wide body E D C B A 8 14 47.98 1 4 Module 24 E D C B A 95.98 1 48 E D C B A 8 Module PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1L5 x LAP000H6PLF Base Part Number HM1 Type no. of rows 5 = 5 row L = Signal header right angle, wide body 1 = 1 module (5 x 6 2 = 2 module (5 x 12 3 = 4 module (5 x 24 4 = 8 module (5 x 48 pos.) pos.) pos.) pos.) no. of pos. Configuration 000 Performance LAP = solder to board mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 71 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 5 row, signal, right angle, press fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density ( 250 contacts per 100mm connector length) Modular design guarantees flexibility Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, press-fit, page 79 1 mod – part number 85761-1101LF 2 mod – on request only 4 mod – part number 85763-1101LF 8 mod – on request only MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Receptacle, straight, solder-to-board, page 77 1 mod – part numbers HM1S51FRR000H6PLF 2 mod – part numbers HM1S52FRR000H6PLF 4 mod – part numbers HM1S53FRR000H6PLF 8 mod - part numbers HM1S54FRR000H6PLF press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION press fit REFERENCE DATA Product specification: GS-12-445 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 72 www.fci.com/metral PRODUCT 17 11.98 1 A 2 6 E D C B A 1 Module 8 2 17.8 11.35 13.5 2 10 B 3.5 7.5 23.98 1 2 Module SIGNAL CONNECTORS Header, 5 row, signal, right angle, press fit, wide body 4 8 12 35 E D C B A 14 47.98 24 1 E D C B A 4 Module 95.98 1 48 E D C B A 8 Module PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1L5 x LDP000H6PLF Base Part Number HM1 Type no. of rows 5 = 5 row L = Signal header right angle, wide body no. of pos. Configuration 000 Packaging H6 = Telcordia CO LDP = press fit mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness 1 = 1 module (5 x 6 2 = 2 module (5 x 12 3 = 4 module (5 x 24 4 = 8 module (5 x 48 Performance LF LF = lead free A P = trays B pos.) pos.) pos.) pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 73 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Header, 5 row, signal, right angle, pin-in-paste, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density ( 250 contacts per 100mm connector length) Modular design guarantees flexibility TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL Receptacle, straight, press-fit, page 79 current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 mod – part number 85761-1101LF Receptacle, straight, solder-to-board, page 77 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers HM1S51FRR000H6PLF ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification: GS-12-446 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 74 www.fci.com/metral SIGNAL CONNECTORS Header, 5 row, signal, right angle, pin-in-paste, wide body PRODUCT 3.5 11.95 1 6 E D 17.8 8 C B A 11.35 13.5 2 2 2 A 10 B 4 7.5 8 14 35.1 PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1L5 x LFP000H6PLF Base Part Number HM1 Type no. of rows 5 = 5 row L = Signal header rright angle, wide body no. of pos. Configuration 000 Performance LFP = Pin-in-Paste mating length (A) tail length (B) 5,75 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B 1 = 1 module (5 x 6 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 75 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Receptacle, 5 row, signal, straight, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density (250 contacts per 100mm connector length) Modular design guarantees flexibility Parallel board applications Tuning fork contact TECHNICAL DATA MATING DATA PHYSICAL Header, right angle, press-fit, page 73 spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO 1 module-part number HM1L51LDP000H6PLF 2 module-part number HM1L52LDP000H6PLF 4 module-part number HM1L53LDP000H6PLF 8 module-part number HM1L54LDP000H6PLF Header, right angle, solder-to-board, page 71 ELECTRICAL 1 module-part number HM1L51LAP000H6PLF 2 module-part number HM1L52LAP000H6PLF 4 module-part number HM1L53LAP000H6PLF 8 module-part number HM1L54LAP000H6PLF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, right angle, Pin-in-Paste, page 75 MECHANICAL PERFORMANCE 1 module-part number HM1L51LFP000H6PLF insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: trays PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-448 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 76 www.fci.com/metral PRODUCT SIGNAL CONNECTORS Receptacle, 5 row, signal, straight, solder to board 0.55 11.95 8 1 Module 2 13.3 0.8 2.45 2.5 14.3 23.95 2 Module 10 2 B 47.95 4 Module 95.95 8 Module PCB pattern P7, see chapter PCB layouts PARTNUMBERS HM1S5 x FRR000H6PLF Base Part Number HM1 Type S = signal receptacle straight no. of rows 5 = 5 row 1 = 1 module (5 x 6 pos.) 2 = 2 module (5 x 12 pos.) 3 = 4 module (5 x 24 pos.) 4 = 8 module (5 x 48 pos.) no. of pos. Configuration 000 FRR = solder to board Performance Packaging H6 = Telcordia CO LF LF = lead free tail length (B) 3,30 mm B P = trays Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 77 SIGNAL CONNECTORS METRAL® SIGNAL CONNECTORS REVERSED Receptacle, 5 row, signal, straight, press fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 row and 2 mm pitch permit high signal density (250 contacts per 100mm connector length) Modular design guarantees flexibility Parallel board applications Tuning fork contact baby H-shape press-fit contact Flat rock design; can pressed on PCB with flat press block MATING DATA Header, right angle, press-fit, page 73 1 module-part number HM1L51LDP000H6PLF 2 module-part number HM1L52LDP000H6PLF 4 module-part number HM1L53LDP000H6PLF 8 module-part number HM1L54LDP000H6PLF TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, right angle, solder-to-board, page 71 1 module-part number HM1L51LAP000H6PLF 2 module-part number HM1L52LAP000H6PLF 4 module-part number HM1L53LAP000H6PLF 8 module-part number HM1L54LAP000H6PLF ELECTRICAL current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, right angle, Pin-in-Paste, page 75 1 module-part number HM1L51LFP000H6PLF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 100 N max. per pin press-fit pin withdrawal: 20 N min. per pin recommended hole diameter: 0,65-0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification: GS-12-447 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 78 www.fci.com/metral PRODUCT B 11.95 6 5 2 14.3 0.5 SIGNAL CONNECTORS Receptacle, 5 row, signal, straight, press fitt 1.3 1 E 1 Module D 8 C 13.3 2 B A 23.95 12 1 E D 2 Module 10 C B 2 A 24 47.95 1 E D 4 Module C B A 95.95 48 1 E 8 Module D C B A PCB pattern P7, see chapter PCB layouts PARTNUMBERS 8576x - 1y01LF Base Part Number 85761 on request only 85763 on request only = 1 module (5 x 6 pos.) = 2 module (5 x 12 pos.) = 4 module (5 x 24 pos.) = 8 module (5 x 48 pos.) Performance Tail length 1 = Telcordia CO y Pin Configuration LF 01 = fully loaded LF = lead free tail length (B) 1 4,3 mm 2 13,6 mm 3 17,1 mm B Note: blue marked in tail length is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 79 80 www.fci.com/metral SHROUDS METRAL® SHROUDS METRAL® SHROUDS Shroud, 4 row, wide body Shroud, 5 row, wide body Shroud, 8 row, wide body www.fci.com/metral 81 METRAL® SHROUDS Shroud, 4 row, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) SHROUDS Different stand-off versions for rear-plug-up Easy direct mounting of the shroud on the pins without need of mounting shroud to PCB. Retention force from the shroud on the press-connector is on the non-contact side of the pin. Wide lead-in for easy mating of female connectors Designed-in polarization. Optional coding. MATING DATA TECHNICAL DATA 4 row Header, straight, press-fit, page 27 PHYSICAL 1 mod 70232-116LF 2 mod 70233-116LF 4 mod 70234-116LF 8 mod 70235-116LF housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 ELECTRICAL withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE TYPICAL APPLICATIONS insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) ENVIRONMENTAL press-fit header shroud press-fit header shroud Operating temperature range: -55˚C to +105˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PROCESSING INFORMATION used over pins previously staked into the pc board REFERENCE DATA product specification: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223. 82 www.fci.com/metral Shroud, 4 row, wide body PRODUCT 11.98 1 3.5 6 2 11.5 D C B 15.8 SHROUDS 1 Module 70203-111LF 6 A 2.3 2 10 17 23.98 1 2 Module 70203-112LF 12 D C B 3,50 Stand off Height Rear Plug-up Mating Length A press-fit header 47.98 1 4 Module 70203-113LF shroud 24 D C B A PCB Thickness 13,60 press-fit header tail length 95.98 1 8 Module 70203-114LF 48 D C B A PARTNUMBERS 70203 - yyyLF Base Part Number 70203 = 4 row shroud, wide body Note: Box packaging no.of positions yyy no. of positions 111 4x6 112 4 x 12 113 4 x 24 114 4 x 48 www.fci.com/metral LF LF = lead free 83 METRAL® SHROUDS Shroud, 5 row, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) SHROUDS Different stand-off versions for rear-plug-up Easy direct mounting of the shroud on the pins without need of mounting shroud to PCB. Retention force from the shroud on the press-connector is on the non-contact side of the pin. Wide lead-in for easy mating of female connectors Designed-in polarization. Optional coding. MATING DATA TECHNICAL DATA 4 row Header, straight, press-fit, page 41 PHYSICAL 1 mod 89006-116LF 2 mod 89007-116LF 4 mod 89008-116LF 8 mod 89009-116LF housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 ELECTRICAL withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE TYPICAL APPLICATIONS insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) ENVIRONMENTAL press-fit header shroud press-fit header shroud Operating temperature range: -55˚C to +105˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PROCESSING INFORMATION used over pins previously staked into the pc board REFERENCE DATA product specification: GS-12-180 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 84 www.fci.com/metral Shroud, 5 row, wide body PRODUCT 11.98 3.5 6 E D C 1 Module 89055-111LF 17.8 B A 13.5 2 SHROUDS 1 8 2.3 2 10 17 23.98 1 2 Module 89055-112LF 12 E D 3,50 Stand off Height C B A Rear Plug-up Mating Length press-fit header 47.98 1 E D C B 4 Module 89055-113LF shroud 24 PCB Thickness 13,60 press-fit header tail length A 95.98 1 48 E D 8 Module 89055-114LF C B A PARTNUMBERS 89055 - yyyLF Base Part Number 89055 = 5 row shroud, wide body Note: Box packaging no.of positions yyy no. of positions 111 5x6 112 5 x 12 113 5 x 24 114 5 x 48 www.fci.com/metral LF LF = lead free 85 METRAL® SHROUDS Shroud, 8 row, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) SHROUDS 8 row and 2 mm pitch permit high signal density ( 800 contacts per 100mm connector length) Stackable with other METRAL® function modules (power, I/O) 2 modules shroud, 8 rows by 6 position TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Header, straight, press-fit, page 49 ELECTRICAL part number 74771-102011LF (used opposite board side) current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, press-fit, page 51 part number 74770-102LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING press-fit header shroud press-fit header shroud standard: tubes PROCESSING INFORMATION used over pins previously staked into the pc board REFERENCE DATA Product specification: GS-12-134 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 86 www.fci.com/metral Shroud, 8 row, wide body SHROUDS PRODUCT 16.70 GND A B C D E F G 6.45 2 16 H 17 2 22 23.88 PARTNUMBERS 98173 - 102LF Base Part Number 98173 = 8 row shroud, wide body no.of positions yyy no. of positions 102 8 x 12 LF LF = lead free Note: Box packaging www.fci.com/metral 87 88 www.fci.com/metral POWER CONNECTORS METRAL® POWER CONNECTORS STANDARD METRAL® POWER CONNECTORS STANDARD Header, 4 row, straight, wide body Header, 4 row, straight, narrow body Receptacle, 4 row, right angle Header, 5 row, straight, wide body Receptacle, 5 row, right angle www.fci.com/metral 89 METRAL® POWER CONNECTORS STANDARD Header, 4 row power, straight, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 power blades contacts POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 101 part number 88949-102LF ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 99 part number 89039-101LF Receptacle, right angle, Pin-in-Paste, page 103 MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm part number 72651-101LF ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 90 www.fci.com/metral Header, 4 row power, straight, solder to board, wide body PRODUCT 17 6 3.45 2 POS 1 D POWER CONNECTORS 2 2.3 1.4 C 6 B 11.5 15.8 0.52 A 2 A B 11.93 PCB pattern P5, see chapter PCB layouts PARTNUMBERS 88960 - 101LF Base Part Number 88960 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 6,50 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 91 METRAL® POWER CONNECTORS STANDARD Header, 4 row power, straight, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Eye the needle press-fit contac TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 101 ELECTRICAL part number 88949-102LF current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 99 part number 89039-101LF MECHANICAL PERFORMANCE Receptacle, right angle, Pin-in-Paste, page 103 insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) part number 72651-101LF press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: press fit REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 92 www.fci.com/metral Header, 4 row power, straight, press-fit, wide body PRODUCT 17.0 6.0 POS 1 3.45 2 2.3 D 2.0 C 1.4 B 11.5 A 15.8 POWER CONNECTORS 6.0 0.52 2.0 A B 11.93 PCB pattern P6, see chapter PCB layouts PARTNUMBERS 70236 - 101LF Base Part Number 70236 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 6,50 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 93 METRAL® POWER CONNECTORS STANDARD Header, 4 row, power, straight, solder to board, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 row 2 power blades contacts Narrow body housing POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 101 part number 88949-102LF ELECTRICAL Receptacle, right angle, solder-to-board, page 99 current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) part number 89039-101LF Receptacle, right angle, Pin-in-Paste, page 103 MECHANICAL PERFORMANCE part number 72651-101LF insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 94 www.fci.com/metral Header, 4 row, power, straight, solder to board, narrow body PRODUCT 6 POS 1 15.9 3.45 2 1.4 D C 6 B 11.5 A POWER CONNECTORS 2 1.15 13.8 A 1.15 B 11.95 PCB pattern P3, see chapter PCB layouts PARTNUMBERS 70278 - 101LF Base Part Number 70278 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 01 6,50 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 95 METRAL® POWER CONNECTORS STANDARD Header, 4 row, power, straight, press-fit, narrow body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 power blades contacts Narrow body housing POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint Eye the needle press-fit contac TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 101 ELECTRICAL part number 88949-102LF current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 99 part number 89039-101LF MECHANICAL PERFORMANCE Receptacle, right angle, Pin-in-Paste, page 103 insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) part number 72651-101LF press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: press fit REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 96 www.fci.com/metral Header, 4 row, power, straight, press-fit, narrow body PRODUCT 15.9 6 D C B A 2 3.5 1.15 2 POS 1 11.5 0.52 POWER CONNECTORS 1.4 6 13.8 1.15 A B 11.95 PCB pattern P4, see chapter PCB layouts PARTNUMBERS 85830 - 101LF Base Part Number 85830 = 1 module, 4 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO yy LF = lead free mating length (A) tail length (B) 6,50 mm 4,30 mm 01 A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 97 METRAL® POWER CONNECTORS STANDARD Receptacle, 4 row, power, right angle, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 dual beam power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Header, straight, press-fit, page 93 1 module – part number 70236-101LF ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, straight, solder-to-board, page 91 1 module – part number 88960-101LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL TYPICAL APPLICATIONS Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 98 www.fci.com/metral Receptacle, 4 row, power, right angle, solder to board PRODUCT 21.14 12.44 11.95 2 1 POWER CONNECTORS 2 D C B A 11.3 B 1.5 0.4 2.98 2 1 4 10 2 6 4 4 PRODUCT AFTER PC BOARD APPLICATION. 9.5 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 89039 - 1yyLF Base Part Number 89039 = 1 module, 4 x 2 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy Tail length (B) PCB Thickness 02 2,73 mm 1,60 mm 11 3,53 mm 2,40 mm B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 99 METRAL® POWER CONNECTORS STANDARD Receptacle, 4 row, power, right angle, press-fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 dual beam power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Press block ensures accurate position of press-fit tails for easy mounting Eye the needle press-fit contac MATING DATA TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 93 1 module – part number 70236-101LF Header, straight, solder-to-board, page 91 ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 module – part number 88960-101LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) TYPICAL APPLICATIONS press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: press fit REFERENCE DATA Press-peg application, TA-0941 Product Specification GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 100 www.fci.com/metral Receptacle, 4 row, power, right angle, press-fit PRODUCT 21.14 11.95 12.44 2 B 11.3 POWER CONNECTORS 2 1.5 1 D C B A 3.08 0.4 2 2 6 4 9.5 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 88949 - 1yyLF Base Part Number 88949 = 1 module, 4 x 2 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy Tail length (B) PCB Thickness 02 2,73 mm 1,60 mm 12 3,53 mm 2,40 mm B Note: blue marked in tail length is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 101 METRAL® POWER CONNECTORS STANDARD Receptacle, 4 row, power, right angle, pin-in-paste FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 dual beam power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Header, straight, press-fit, page 93 1 module – part number 70236-101LF ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, straight, solder-to-board, page 91 1 module – part number 88960-101LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Packaging specification GS-14-920 Product Specification GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 102 www.fci.com/metral Receptacle, 4 row, power, right angle, pin-in-paste PRODUCT D C B 11.3 2 A B 1.5 1 2 0.2 POWER CONNECTORS 8.8 10 11.95 9.5 6 13.5 PCB pattern P1, see chapter PCB layouts PARTNUMBERS 72651 - 1yyLF Base Part Number 72651 = 1 module, 4 x 2 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy Tail length (B) PCB Thickness 02 2,73 mm 1,60 mm 11 3,53 mm 2,40 mm B Note: blue marked in tail length is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 103 METRAL® POWER CONNECTORS STANDARD Header, 5 row, power, straight, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 power blades contacts POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA Receptacle, right angle, press-fit, page 109 current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) part number 85876-1yyLF Receptacle, right angle, solder-to-board, page 111 part number 89096-1yyLF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm Receptacle, right angle, Pin-in-Paste, page 113 part number 63793-101LF ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 104 www.fci.com/metral Header, 5 row, power, straight, solder to board, wide body PRODUCT 6 POS 1 1.4 17 3.45 2 2.3 E 2 C 13.5 B POWER CONNECTORS D 8 0.52 17.8 A 2 A B 11.93 PCB pattern P16, see chapter PCB layouts PARTNUMBERS 63346 - 104LF Base Part Number 63346 = 1 module, 5 x 2 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 04 6,50 mm 4,25 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 105 METRAL® POWER CONNECTORS STANDARD Header, 5 row, power, straight, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Eye the needle press-fit contac TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL Receptacle, right angle, press-fit, page 109 current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) part number 85876-1yyLF Receptacle, right angle, solder-to-board, page 111 MECHANICAL PERFORMANCE part number 89096-1yyLF insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) Receptacle, right angle, Pin-in-Paste, page 113 part number 63793-101LF press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: press fit REFERENCE DATA Product Specification GS-12-180 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 106 www.fci.com/metral Header, 5 row, power, straight, press-fit, wide body PRODUCT 17 1 3.45 2 2.3 E D C B A 2 8 13.5 POWER CONNECTORS 1.4 6 0.52 17.8 2 A B 11.93 PCB pattern P7, see chapter PCB layouts PARTNUMBERS 89099 - 111LF Base Part Number 89099 = 1 module, 5 x 6 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 11 6,50 mm 4,30 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 107 METRAL® POWER CONNECTORS STANDARD Receptacle, 5 row, power, right angle, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 dual beam power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Header, straight, press-fit, page 107 1 module – part number 89099-111LF ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, straight, solder-to-board, page 105 MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) 1 module – part number 63346-104LF press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 108 www.fci.com/metral Receptacle, 5 row, power, right angle, solder to board PRODUCT 11.95 12.44 2 2 C B 13.3 1.5 B 1 E D POWER CONNECTORS 23.14 A 2.9 0.4 2 10 2 9.5 8 4 PCB pattern P2, see chapter PCB layouts PARTNUMBERS 85876 - 1yyLF Base Part Number 85876 = 1 module, 5 x 2 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy Tail length (B) PCB Thickness 02 2,73 mm 1,60 mm 12 3,53 2,40 B Note: blue marked in tail length is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 109 METRAL® POWER CONNECTORS STANDARD Receptacle, 5 row, power, right angle, press-fit FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 dual beam power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) Press block ensures accurate position of press-fit tails for easy mounting Eye the needle press-fit contac MATING DATA TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO Header, straight, press-fit, page 107 1 module – part number 89099-111LF Header, straight, solder-to-board, page 105 ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) 1 module – part number 63346-104LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: press fit REFERENCE DATA Press-peg application, TA-0941 Product Specification GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 110 www.fci.com/metral Receptacle, 5 row, power, right angle, press-fit PRODUCT 23.14 11.95 12.44 2 13.3 B POWER CONNECTORS 2 1 E D C B A 2.9 0.4 1.5 10 2 2 9.5 8 4 PCB pattern P2, see chapter PCB layouts PARTNUMBERS 89096 - 1yyLF Base Part Number 89096 = 1 module, 5 x 2 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy Tail length (B) PCB Thickness 02 2,73 mm 1,60 mm 12 3,53 mm 2,40 mm B Note: blue marked in tail length is the preferred recommended standard for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 111 METRAL® POWER CONNECTORS STANDARD Receptacle, 5 row, power, right angle, pin-in-paste FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 dual beam power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA Header, straight, press-fit, page 107 1 module – part number 89099-111LF ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Header, straight, solder-to-board, page 105 1 module – part number 63346-104LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard Tubes PROCESSING INFORMATION automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Packaging specification GS-14-920 Product Specification GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 112 www.fci.com/metral Receptacle, 5 row, power, right angle, pin-in-paste PRODUCT 11.95 6 1 0.5 10.8 13.3 B E D C B A 2 1.5 2 1 8 POWER CONNECTORS 2 10 4 9.5 PCB pattern P2, see chapter PCB layouts PARTNUMBERS 63793 - 101LF Base Part Number 63793 = 1 module, 5 x 2 pos. Performance Pin Configuration 1 = Telcordia CO LF LF = lead free yy Tail length (B) 01 2,80 mm B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 113 POWER CONNECTORS 114 www.fci.com/metral POWER CONNECTORS METRAL® POWER CONNECTORS REVERSED METRAL® POWER CONNECTORS REVERSED Header, 4 row, right angle, wide body Header, 4 row, right angle, narrow body Receptacle, 4 row, straight Header, 5 row, right angle, wide body Receptacle, 5 row, straight www.fci.com/metral 115 METRAL® POWER CONNECTORS REVERSED Header, 4 row, power, right angle, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 power blades contacts POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 123 part number 85968-101LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING TYPICAL APPLICATIONS Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-446 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 116 www.fci.com/metral Header, 4 row, power, right angle, solder to board, wide body PRODUCT 7.5 11.98 D 15.8 B 2 A 6 9.35 11.5 A 6 3.5 POWER CONNECTORS C B 4 2 6 31.86 10.86 PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1K4 1 DAP000H6PLF Base Part Number HM1 Type K = power header right angle no. of rows no. of pos. Configuration 000 4 = 4 row Performance Packaging H6 = Telcordia CO LF LF = lead free DAP = solder to board mating length (A) tail length (B) 6,50 mm 2,90 mm 1,6 mm PCB thickness A P = trays B 1 = 1 module (4 x 2 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 117 METRAL® POWER CONNECTORS REVERSED Header, 4 row, power, right angle, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Eye the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 123 part number 85968-101LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Trays PROCESSING INFORMATION Applicable process: press fit REFERENCE DATA Product specification: GS-12-445 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 118 www.fci.com/metral Header, 4 row, power, right angle, press-fit, wide body PRODUCT 11.98 D C B A 7.5 6 2 15.8 6 9.35 11.5 POWER CONNECTORS 1 B 4 6 A 3.5 2 6 31.86 10.86 PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1K4 1 DDP000H6PLF Base Part Number HM1 Type K = power header right angle no. of rows 4 = 4 row no. of pos. Configuration 000 Performance DDP = press fit Packaging H6 = Telcordia CO mating length (A) tail length (B) 6,50 mm 2,90 mm 1,6 mm PCB thickness LF LF = lead free A P = trays B 1 = 1 module (4 x 2 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 119 METRAL® POWER CONNECTORS REVERSED Header, 4 row, power, right angle, pin-in-paste, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 power blades contacts POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 123 part number 85968-101LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING TYPICAL APPLICATIONS Trays PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification: GS-12-446 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 120 www.fci.com/metral Header, 4 row, power, right angle, pin-in-paste, wide body PRODUCT 11.98 7.5 6 D C B A 2 15.8 11.5 6 POWER CONNECTORS 1 9.35 B 6 A 4 3.5 2 6 31.9 10.86 PCB pattern P1, see chapter PCB layouts PARTNUMBERS HM1K4 1 DFP000H6PLF Base Part Number HM1 Type K = power header right angle no. of rows 4 = 4 row no. of pos. Configuration 000 Performance DFP = Pin-in-Paste mating length (A) tail length (B) 6,50 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B 1 = 1 module (4 x 2 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 121 METRAL® POWER CONNECTORS REVERSED Receptacle, 4 row, power, straight, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 4 x 2 dual beam power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA Header, right angle, press-fit, page 119 part number HM1K41DDP000H6PLF Header, right angle, solder-to-board, page 117 current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) part number HM1K41DAP000H6PLF Header, right angle, Pin-in-Paste, page 121 MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm part number HM1K41DFP000H6PLF ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Trays PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 122 www.fci.com/metral Receptacle, 4 row, power, straight, solder to board PRODUCT 11.95 1 14.14 1.3 2 B 12.44 D C 2 11.3 A 2 6 13.2 POWER CONNECTORS B 1.28 0.4 2 10 PCB pattern P5, see chapter PCB layouts PARTNUMBERS 85968 - 101LF Base Part Number 85968 = 1 module, 4 x 2 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy Tail length (B) PCB Thickness 01 3,50 mm 1,60 mm B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 123 METRAL® POWER CONNECTORS REVERSED Header, 5 row, power, right angle, solder to board, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 power blades contacts POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 131 part number 94561-112LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Trays PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product specification: GS-12-446 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 124 www.fci.com/metral Header, 5 row, power, right angle, solder to board, wide body PRODUCT 35 3.5 11.98 6 E D C B A 17.8 8 11.35 13.5 2 A 6 POWER CONNECTORS 1 B 2 4 7.5 8 14 PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1K5 1 DAP000H6PLF Base Part Number HM1 Type K = power header right angle no. of rows 5 = 5 row no. of pos. Configuration 000 Performance DAP = solder to board mating length (A) tail length (B) 6,50 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B 1 = 1 module (5 x 2 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 125 METRAL® POWER CONNECTORS REVERSED Header, 5 row, power, right angle, press-fit, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Eye the needle press-fit contac TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO MATING DATA ELECTRICAL Receptacle, straight, solder-to-board, page 131 current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) part number 94561-112LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) press-fit contact insertion: 55 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Trays PROCESSING INFORMATION Applicable process: press fit REFERENCE DATA Product specification: GS-12-445 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 126 www.fci.com/metral Header, 5 row, power, right angle, press-fit, wide body PRODUCT 1 35 7.5 11.98 A 6 E D C B A 17.8 8 11.35 13.5 6 2 3.5 POWER CONNECTORS 2 B 4 17 8 14 PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1K5 1 DDP000H6PLF Base Part Number HM1 Type K = power header right angle no. of rows 5 = 5 row no. of pos. Configuration 000 Performance DDP = press fit Packaging H6 = Telcordia CO mating length (A) tail length (B) 6,50 mm 2,90 mm 1,6 mm PCB thickness LF LF = lead free A P = trays B 1 = 1 module (5 x 2 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 127 METRAL® POWER CONNECTORS REVERSED Header, 5 row, power, right angle, pin-in-paste, wide body FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 power blades contacts POWER CONNECTORS 12 mm power modules are form- and fit interchangeable with signal modules on same footprint TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, straight, solder-to-board, page 131 part number 94561-112LF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING TYPICAL APPLICATIONS Trays PROCESSING INFORMATION Pick&place by vacuum nozzle or mechanical gripper automatic Surface-mount reflow process, resistance for Lead Free reflow temperature REFERENCE DATA Product specification: GS-12-446 Application Specification BUS-20-075 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 128 www.fci.com/metral Header, 5 row, power, right angle, pin-in-paste, wide body PRODUCT 11.98 D C B A 7.5 6 2 15.8 11.5 6 9.35 POWER CONNECTORS 1 B 6 A 4 3.5 2 6 31.9 10.86 PCB pattern P2, see chapter PCB layouts PARTNUMBERS HM1K5 1 DFP000H6PLF Base Part Number HM1 Type K = power header right angle no. of rows 5 = 5 row no. of pos. Configuration 000 Performance DFP = Pin-in-Paste mating length (A) tail length (B) 6,50 mm 2,90 mm 1,6 mm PCB thickness Packaging H6 = Telcordia CO LF LF = lead free A P = trays B 1 = 1 module (5 x 2 pos.) Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 129 METRAL® POWER CONNECTORS REVERSED Receptacle, 5 row, power, straight, solder to board FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) 5 x 2 dual beam power blades contacts 12 mm power modules are form- and fit interchangeable with signal modules on same footprint POWER CONNECTORS Modular design guarantees flexibility Stackable end-to-end without loss of position Stackable with other METRAL® function modules (power, I/O) TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP (30% glass), colour natural flammability rating: UL 94 V-0 contact material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA Header, right angle, press-fit, page 127 part number HM1K451DDP000H6PLF Header, right angle, solder-to-board, page 125 current rating: 3 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) part number HM1K51DAP000H6PLF Header, right angle, Pin-in-Paste, page 129 part number HM1K51DFP000H6PLF MECHANICAL PERFORMANCE insertion force: 1,50 N max. per individual power contact (mating) withdrawal force: 0,30 N max. per individual power contact (unmating) recommended hole diameter: 0,65-0,80 mm TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Standard Tubes PROCESSING INFORMATION Applicable process: wave, IR, vapor phase REFERENCE DATA Product Specification GS-12-453 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 130 www.fci.com/metral Receptacle, 5 row, power, straight, solder to board PRODUCT 1 2 2 E D C B A 2 14 11.95 POWER CONNECTORS 15.8 B 16.6 B 2 0.4 PCB pattern P16, see chapter PCB layouts PARTNUMBERS 94561 - 1yyLF Base Part Number 94561 = 1 module, 5 x 2 pos. Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy Tail length (B) PCB Thickness 11 2,65 mm 1,60 mm 12 3,45 mm 2,40 mm B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 131 132 www.fci.com/metral ELECTRICAL ENHANCED METRAL® ELECTRICAL ENHANCED CONNECTORS METRAL® ELECTRICAL ENHANCED SIGNAL CONNECTORS Header, Straight, 5 row Shroud, 5 row Receptacle, Right Angle, 5 row www.fci.com/metral 133 METRAL® ELECTRICAL ENHANCED CONNECTORS Header, 5+2 row, signal, straight, press-fit, wide body FEATURES 5 row Header 2 row Shielding, because of die-cast housing all signal pins are surrounded by a ground path, consequently reducing crosstalk and ground bounce. EMI of 15 dB ELECTRICAL ENHANCED Press-fit, eye of the needle contact TECHNICAL DATA PHYSICAL Housing: Die-cast zinc alloy Wafer material: glass filled LCP, UL 94 V-0, color natural Contact material: Phosphor bronze Performance level: Telcordia CO MATING DATA Electrical Enhanced Receptacle, Signal, right angle ELECTRICAL current rating: 1 A withstanding voltage: 1000 V rms (sea level) part number 85847-102LF, MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) Electrical Enhanced Shroud, wide body part numbers 70438-111LF, press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 20 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification GS-12-074 Application specification TA-941 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 134 page 139 www.fci.com/metral page 137 Header, 5+2 row, signal, straight, press-fit, wide body PRODUCT 16.43 3.30 2.3 A 1 2 5 6 F E D C B A H G 2 13.5 1.4 17.80 4 2 10 16.55 8 2 ELECTRICAL ENHANCED 3.8 2 11.95 B PCB pattern P15, see chapter PCB layouts PARTNUMBERS 70437 - 1yyLF Base Part Number 70437 = Electrical Enhanced header, straight, signal, press-fit Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) rear plug up length (B) 11 6,50 mm 4,30 mm 16 5,75 mm 4,30 mm 18 5,00 mm 4,30 mm 21 6,50 mm 13,60 mm 26 5,75 mm 13,60 mm 28 5,00 mm 13,60 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 135 METRAL® ELECTRICAL ENHANCED CONNECTORS Shroud, 5+2 row, wide body FEATURES 5 row Shroud 2 row Shielding, because of die-cast housing all signal pins are surrounded by a ground path, consequently reducing crosstalk and ground bounce. ELECTRICAL ENHANCED EMI of 15 dB TECHNICAL DATA PHYSICAL Housing: Die-cast zinc alloy Wafer material: glass filled LCP, UL 94 V-0, color natural MATING DATA Rear plug up- Header, Signal, straight, press-fit, page 135 ELECTRICAL current rating: 1 A withstanding voltage: 1000 V rms (sea level) partnumber 70437-121LF partnumber 70437-126LF partnumber 70437-128LF MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) TYPICAL APPLICATIONS ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification GS-12-074 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 136 www.fci.com/metral Shroud, 5+2 row, wide body PRODUCT 16.43 3.30 11 1 2 3 4 5 6 1.3 0.5 1.66 A 11.75 16.55 ELECTRICAL ENHANCED F E D C B A H G 3,50 Stand off Height Rear Plug-up Mating Length press-fit header shroud PCB Thickness 13,60 press-fit header tail length PARTNUMBERS 70438 - 111LF Base Part Number 70438 = Electrical Enhanced Shroud, wide body no.of positions LF 111 = 1 module, 5 x 6 positions www.fci.com/metral LF = lead free 137 METRAL® ELECTRICAL ENHANCED CONNECTORS Receptacle, 5+2 row, signal, right angle, press fit FEATURES 5 row Receptacle 2 row Shielding, because of die-cast housing all signal pins are surrounded by a ground path, consequently reducing crosstalk and ground bounce. EMI of 15 dB ELECTRICAL ENHANCED Press-fit, eye of the needle contact TECHNICAL DATA PHYSICAL Housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 Contact material: Phosphor bronze Shielding material: Phosphor bronze Performance level: Telcordia CO MATING DATA Electrical Enhanced Header, Signal, straight, page 135 part number 70437-111LF part number 70437-116LF part number 70437-118LF ELECTRICAL current rating: 1 A withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 20 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification GS-12-074 Application specification TA-941 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 138 www.fci.com/metral Receptacle, 5+2 row, signal, right angle, press fit ELECTRICAL ENHANCED PRODUCT PCB pattern P2, see chapter PCB layouts PARTNUMBERS 85847 - 102LF Base Part Number 85847 = Electrical enhanced Receptacle, signal Performance Pin Configuration LF 1 = Telcordia CO LF = lead free 02 = 1 module, 5 x 6 positions Dim B = 2,90 mm for 1,6 pcb B www.fci.com/metral 139 140 www.fci.com/metral SHIELDED CONNECTORS METRAL® SHIELDED SIGNAL CONNECTORS METRAL® SHIELDED SIGNAL CONNECTORS Header, Straight, 5 row Round cable connector www.fci.com/metral 141 METRAL® SHIELDED SIGNAL CONNECTORS Shielded Header, 5 row, signal, straight, press-fit FEATURES Because of die-cast housing all signal pins are surrounded by a ground path. EMI improved 5 row Header, 1 module active latching system Press-fit, eye of the needle contact SHIELDED CONNECTORS TECHNICAL DATA PHYSICAL Housing: Die-cast zinc alloy Wafer material: glass filled LCP, UL 94 V-0, color natural Contact material: Phosphor bronze Ground spring material : copper-nickel-tin alloy Performance level: Telcordia CO ELECTRICAL current rating: 1 A withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 20 N min. per pin recommended hole diameter: 0,65-0,80 mm ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC MATING DATA Round Cable connector, Shielded 5 x 6 pos. part number 85706-xxxxLF, page 145 Cable Connector 5 row, part number 72478-1111LF, page 175 Receptacle, 5 row Right angle, press-fit, part number 89047-102LF, Straight, press-fit, part number 85761-1101LF, TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA Product specification GS-12-135 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 142 www.fci.com/metral page 45 page 79 Header, 5 row, signal, straight, press-fit PRODUCT 2.18 A 11.0 1.75 4 2 8 17.8 6 F E D C B A 2 4 2.83 3.4 1 G 2 17.0 SHIELDED CONNECTORS 11.95 B PCB pattern P15, see chapter PCB layouts PARTNUMBERS 72031 - 1yyLF Base Part Number 72031 = 1 module (5 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yy mating length (A) tail length (B) 11 6,50 mm 4,30 mm 16 first-make last-brake 14 5,75 mm 4,30 mm row A = 5,75 mm 4,30 mm row B = 5,75 mm 4,30 mm row C = 7,25 mm 4,30 mm row D = 5,75 mm 4,30 mm row E = 5,75 mm 4,30 mm A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 143 METRAL® SHIELDED SIGNAL CONNECTORS Shielded Cable Connector, 5 row, signal FEATURES 5 row , 1 module Round Cable Connector Heat Shrink or Crimp Ring version EMI improved Active latching system AWG size 24,26,28 and 30 Reliable dual beam contact IDC wire termination SHIELDED CONNECTORS TECHNICAL DATA PHYSICAL Housing: glass filled thermoplastic polyester, color grey Latch: polycarbonate, color black, UL 94 V-0 Cover: copper-nickel-tin alloy Contact material: Phosphor bronze Performance level: Telcordia CO ELECTRICAL current rating: 1 A withstanding voltage: 1000 V rms (sea level) MATING DATA Shielded Header, straight, press-fit, wide body, page 143 part number 72031-116LF Header, straight, press-fit, wide body, page 41 part number 89006-116LF MECHANICAL PERFORMANCE insertion force: 0,645 N max. per individual signal contact (mating) withdrawal force: 0,36 N max. per individual signal contact (unmating) ENVIRONMENTAL Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC Header, right angle, press-fit, wide body, page 73 part number HM151LDP000H6PLF TYPICAL APPLICATIONS PACKAGING Kits, bags of 100 pcs REFERENCE DATA application specification GES-20-003 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 144 www.fci.com/metral Shielded Cable Connector, 5 row, signal PRODUCT Crimped version SHIELDED CONNECTORS Heat shrink version PARTNUMBERS 85706 - 1yz1LF Base Part Number 85706 = 1 module (5 x 6 pos.) Performance Pin Configuration LF 1 = Telcordia CO LF = lead free yz1 y=0 heat shrink version y=2 crimped version inner ferrule 8 mm dia. outer ferrule 10 mm dia. z=1 AWG size: 26 to 24 AWG z=2 AWG size: 30 to 28 AWG www.fci.com/metral 145 146 www.fci.com/metral HIGH POWER METRAL® HIGH POWER CONNECTORS METRAL® HIGH POWER CONNECTORS Header, High Power Receptacle, High Power www.fci.com/metral 147 METRAL® HIGH POWER CONNECTORS Header, High Power FEATURES Available in 1x2 or 2x2 contact configurations Rated for up to 80 Amps current for a single module Voltage Rating: 150V Receptacle connectors can be provided with two contact lengths to enable first-mate/last break sequencing Protected backplane receptacle connector is UL 60950 (Finger Probe) compliant Layout compatible with Metral 2mm backplane connector family Press-fit termination MATING DATA TECHNICAL DATA PHYSICAL Contacts: Copper Alloy Plating: s Gold over nickel on separable interface s Tin-lead over nickel on press-fit tails Housing: High temperature thermoplastic, UL 94V-0 compliant Performance level Telcordia CO Receptacle, page 151 Vertical receptacle, 8,0 mm mating length, 10009536-001 Vertical receptacle, 6,5 mm mating length, 10009536-002 Vertical receptacle, fmlb, 10025058-XXXX HIGH POWER ELECTRICAL (see table below) MECHANICAL PERFORMANCE Mating force: 31.2N max per connector Unmating force: 9.0N min per connector Press-fit insertion force: 67N max per individual contact tail PACKAGING Tubes PROCESSING INFORMATION Applicable process: wave/IR / vapor phase REFERENCE DATA Product Specification GS-12-220 Application Specification GS-20-023 Safety UL 60950 & IEC 60950-1 Prevention of Operator Access to Energized Parts ELECTRICAL number of connectors, Fully powered 148 copper pad weight Current ratings (max. Amps per contact) 1x2 2x2 1 5 oz, double sided 40 20 up to 5 adjacent 5 oz, double sided 32 14 1 2 oz, double sided 32 15 up to 5 adjacent 2 oz, double sided 27 12 www.fci.com/metral Header, High Power PRODUCT 26.4 17.1 10.8 17.8 4.6 3 2 11.9 1 0.2 8 0.2 3 3 Ø 2.1 HIGH POWER PCB pattern P23, see chapter PCB layouts PARTNUMBERS 10009542-001LF 10009556-001LF Base Part Number Configuration LF LF = lead free part number Description 10009542-001LF Right-angle header, 2x2 Contacts 10009556-001LF Right-angle header, 1x2 Contacts www.fci.com/metral 149 METRAL® HIGH POWER CONNECTORS Receptacle, High Power FEATURES Available in 1x2 or 2x2 contact configurations Rated for up to 80 Amps current for a single module Voltage Rating: 150V Receptacle connectors can be provided with two contact lengths to enable first-mate/last break sequencing Protected backplane receptacle connector is UL 60950 (Finger Probe) compliant Layout compatible with Metral 2mm backplane connector family Press-fit termination TECHNICAL DATA MATING DATA HIGH POWER PHYSICAL Contacts: Copper Alloy Plating: s Gold over nickel on separable interface s Tin-lead over nickel on press-fit tails Housing: High temperature thermoplastic, UL 94V-0 compliant Performance level Telcordia CO Header, page 149 right angle header, 2 x 2 contacts, partnumber, 10009452-001 right angle header, 1 x 2 contacts, partnumber, 10009556-001 ELECTRICAL (see table below) MECHANICAL PERFORMANCE Mating force: 31.2N max per connector Unmating force: 9.0N min per connector Press-fit insertion force: 67N max per individual contact tail PACKAGING Tubes PROCESSING INFORMATION Applicable process: wave/IR / vapor phase REFERENCE DATA Product Specification GS-12-220 Application Specification GS-20-023 Safety UL 60950 & IEC 60950-1 Prevention of Operator Access to Energized Parts ELECTRICAL number of connectors, Fully powered 150 copper pad weight Current ratings (max. Amps per contact) 1x2 2x2 1 5 oz, double sided 40 20 up to 5 adjacent 5 oz, double sided 32 14 1 2 oz, double sided 32 15 up to 5 adjacent 2 oz, double sided 27 12 www.fci.com/metral Receptacle, High Power PRODUCT 11 10 7.9 4.3 0.2 11.9 5 15.4 2 4 2 2 4 2 4 PCB pattern P24, see chapter PCB layouts 4 4 PARTNUMBERS Base Part Number Pin Configuration LF 10009536-yyyLF receptacle, straight receptacle straight 10025058-yyyyLF yyy position number mating length 001 - 8,00 mm 002 - 6,00 mm yyyy position number mating length pos. 1 1,10 mm pos. 2 2,60 mm pos. 3 2,60 mm pos. 4 2,60 mm pos. 1 1,10 mm pos. 2 1,10 mm pos. 3 2,60 mm pos. 4 2,60 mm pos. 1 1,10 mm pos. 2 1,10 mm pos. 3 2,60 mm pos. 4 2,60 mm pos. 1 2,60 mm pos. 2 1,10 mm pos. 3 2,60 mm pos. 4 2,60 mm pos. 1 2,60 mm pos. 2 1,10 mm pos. 3 1,10 mm pos. 4 2,60 mm receptacle, straight, FMLB HIGH POWER LF = lead free 1222 1122 receptacle straight FMLB 2122 2111 2112 www.fci.com/metral 151 152 www.fci.com/metral HYBRID CONNECTORS METRAL® HYBRID CONNECTORS METRAL® HYBRID CONNECTORS DIN Standard High Power Mini Power DIN Standard Coax Mini Coax www.fci.com/metral 153 METRAL® HYBRID CONNECTORS Header, straight, DIN standard, High Power FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Insert according to DIN 41626 Insert quality tested according to MIL-Std-202 and BS 9525 F0011 TECHNICAL DATA PHYSICAL MATING DATA housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: Beryllium Copper performance level: Telcordia CO Hybrid DIN standard receptacle, High power right angle, page 157 ELECTRICAL Receptacle power insert right angle, solder to board Receptacle power insert, right angle, solder to board , feed-through current rating: up to 40 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE HYBRID CONNECTORS Recommended hole diameter: 1,00 ± 0,1 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard boxes/bags PROCESSING INFORMATION Applicable process: assemble to board APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 154 www.fci.com/metral 85995-103LF 70424-003LF Header, straight, DIN standard, High Power PRODUCT Wide Body Housing Narrow Body Housing 13.6 3 1.7 4.4 3 12.4 12.0 11.5 13.8 12 11.5 5.0 4.4 5 15.8 Ø 4.8 11.95 11.95 15.90 17 0.98 PCB pattern P9, see chapter PCB layouts Power insert, straight, press fit Power coupler 5.6 2 9.5 6.4 9.5 Ø3.25 Ø3.6 Ø2.9 A ML REF. 9.5 Ø5.25 Ø5.25 Ø3.6 4.80 Ø4.8 ML REF. B A A 11.50 11.50 POWER PIN ASSEMBLY STYLE A HYBRID CONNECTORS Screw to board, high power straight plug POWER PIN ASSEMBLY STYLE B PARTNUMBERS Housings Power inserts Partnumber Description Partnumber Description Current rating 70290-001LF narrow body housing 85977-001LF power insert straight press-fit 30 A - 88911-101LF wide body housing 70201-001LF power coupler 40 A 1,6 mm Partnumber Description mating length dimension A 91570-001LF screw to board high power straight plug 8,00 mm 11,50 mm www.fci.com/metral PCB thickness 155 METRAL® HYBRID CONNECTORS Receptacle, Right angle, DIN standard, High Power FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Insert according to DIN 41626 Insert quality tested according to MIL-Std-202 and BS 9525 F0011 TECHNICAL DATA PHYSICAL MATING DATA housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 contact material: Beryllium Copper performance level: Telcordia CO High power plug insert, page 155 partnumber, 91570-001LF ELECTRICAL current rating: up to 40 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) MECHANICAL PERFORMANCE HYBRID CONNECTORS Recommended hole diameter: 1,00 ± 0,1 mm ENVIRONMENTAL Operating temperature -55˚C to + 125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING Standard boxes/bags PROCESSING INFORMATION Applicable process: wave / IR / vapor phase / press-fit APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 156 www.fci.com/metral Receptacle, Right angle, DIN standard, High Power PRODUCT Power inserts 17.55 2.4 Housings 9 2.5 4.75 5.25 3.2 11.4 5.7 Ø 4.8 8.4 5 6 5 KIT, pre-assembled housings & inserts 13.84 11.95 12.44 11.30 5.20 A 9.50 0.38 6 4 2 PCB pattern P8 / P10, see chapter PCB layouts 4 PARTNUMBERS Partnumber Description Feature 89092-101LF receptacle housing press-peg HYBRID CONNECTORS Housings Power inserts Partnumber Description Current rating PCB thickness 85995-103LF receptacle power insert right angle solder to board 40 A - KIT, pre-assembled housings & inserts Partnumber Description Current rating PCB thickness 70424-003LF receptacle power insert RA solder to board, feed through 30 A 1,6 mm www.fci.com/metral 157 METRAL® HYBRID CONNECTORS Header, Mini power FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Insert according to DIN 41626 Insert quality tested according to MIL-Std-202 and BS 9525 F0011 TECHNICAL DATA PHYSICAL Housing material: glass filled LCP Flammability rating: UL 94 V-0 Insert material shell Copper zinc 39 Pb 2 Spring : Beryllium copper Insulator: PTFE Teflon Clip: BerylliumCopper Performance level Telcordia CO MATING DATA Housing, page 161 partnumber 70244-102 Insert, page 161 partnumber 85976-001LF partnumber 85976-002 LF ELECTRICAL (see table below) MECHANICAL PERFORMANCE Insertion force, 0.9 N Extraction Force 0.9 N TYPICAL APPLICATIONS PACKAGING Standard boxes/bags PROCESSING INFORMATION HYBRID CONNECTORS Applicable process: wave/IR / vapor phase / press-fit REFERENCE DATA Application Specification TA-0941 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 ELECTRICAL 50 Ω 75 Ω 0 - 10 GHz 0 - 1,5 GHz max.0,05 up to 1 GHz; max. 0,01 up to 10 Ghz max.0,01 up to 1,5 GHz Peak voltage 750 V eff. 750 V eff. Operating voltage 250 V eff. 250 V eff. 1 x 103 MΩ initially, 1 x 103 MΩ initially, -650C to +1650C -650C to +1650C Electrical characteristic impedance Working frequency Reflection coefficient Insulation resistance Temperature range 158 www.fci.com/metral Header, Mini power PRODUCT Housings Right angle Housings Straight 1.7 13.6 4 4 12.4 3 2.4 4 4 15.8 8 8 3 13.8 12 11.5 12 4 0.8 11.95 11.95 17.1 10 15.9 0.98 PCB pattern P12, see chapter PCB layouts Inserts Straight 4.7 3.1 7.8 3.5 Inserts Right angle 2 1 1 Ø 2.2 Ø 2.6 2.67 1.36 2 1.45 A 5 B 5 Ø 2.6 Ø 2.17 Ø 2.2 Ø 2.6 PARTNUMBERS Housings Straight Inserts Straight Description Partnumber Description Partnumber (tail) length PCB thickness 88913-111LF 6 position STR header-wide body-STB 85973-001LF Mini power STR insert- PF 4,45 mm - 70243-111LF 6 position STR header-narrow body-STB 85972-001LF Mini power plug/coupler 17,40 mm 1,6 mm Tail length PCB thickness Housings Right angle Partnumber 88982-102LF Inserts Right angle Description 6 position RA header-press peg Description Partnumber 85975-001LF Mini power RA insert, row A 3,8 mm 2,4 mm 85975-002LF Mini power RA insert, row B 3,8 mm 2,4 mm RA = right angle, STR = straight, STB = solder-to-board, PF = press-fit www.fci.com/metral 159 HYBRID CONNECTORS 3.5 METRAL® HYBRID CONNECTORS Receptacle, Mini Power FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Insert according to DIN 41626 Insert quality tested according to MIL-Std-202 and BS 9525 F0011 TECHNICAL DATA PHYSICAL Housing material: glass filled LCP Flammability rating: UL 94 V-0 Insert material shell Copper zinc 39 Pb 2 Spring : Beryllium copper Insulator: PTFE Teflon Clip: BerylliumCopper Performance level Telcordia CO MATING DATA Straight, page 159 housing, partnumber insert, partnumber 88913-111LF 85973-001LF ELECTRICAL (see table below) Right angle, page 159 MECHANICAL PERFORMANCE housing, partnumber insert, partnumber insert, partnumber Insertion force, 0.9 N Extraction Force 0.9 N 88982-102LF 85975-001LF 85975-002LF PACKAGING Standard boxes/bags TYPICAL APPLICATIONS HYBRID CONNECTORS PROCESSING INFORMATION Applicable process: wave/IR / vapor phase REFERENCE DATA Application Specification TA-0941 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 ELECTRICAL 50 Ω 75 Ω 0 - 10 GHz 0 - 1,5 GHz max.0,05 up to 1 GHz; max. 0,01 up to 10 Ghz max.0,01 up to 1,5 GHz Peak voltage 750 V eff. 750 V eff. Operating voltage 250 V eff. 250 V eff. 1 x 103 MΩ initially, 1 x 103 MΩ initially, -650C to +1650C -650C to +1650C Electrical characteristic impedance Working frequency Reflection coefficient Insulation resistance Temperature range 160 www.fci.com/metral Receptacle, Mini Power PRODUCT Housings Inserts 8 4 A 12.44 110° 4 11.2 B 1 110° 4.25 8.8 11.3 Ø 2.1 2.5 2.8 3.5 0.6 A C Ø3 Ø 2.6 Ø 3.3 10 3.8 Ø1 Ø 0.5 4 11.95 4 9.5 PCB pattern P20, see chapter PCB layouts HYBRID CONNECTORS PARTNUMBERS Housings Partnumber Description 70244-102LF 6 position RA housing Inserts Partnumber Description tail length PCB thickness 85976-001LF Mini power RA insert- 2 position, row A 3,8 mm 2,6 mm 85976-002LF Mini power RA insert- 2 position, row B 3,8 mm 2,4 mm RA = right angle, STR = straight, STB = solder-to-board, PF = press-fit www.fci.com/metral 161 METRAL® HYBRID CONNECTORS Header, straight, DIN standard, Coax FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Insert according to DIN 41626 Insert quality tested according to MIL-Std-202 and BS 9525 F0011 TECHNICAL DATA PHYSICAL MATING DATA Housing material: glass filled LCP Flammability rating: UL 94 V-0 Insert material shell Copper zinc 39 Pb 2 Spring : Beryllium copper Insulator: PTFE Teflon Clip: BerylliumCopper Performance level Telcordia CO Right angle, solder to board, page 165 housing, partnumber insert, partnumber ELECTRICAL (see table below) 89092-101LF 93904-001LF Right angle, press-fit, page 165 MECHANICAL PERFORMANCE housing, partnumber insert, partnumber Insertion force, 0.9 N Extraction Force 0.9 N 89082-101LF 72096-101LF PACKAGING Standard boxes/bags TYPICAL APPLICATIONS HYBRID CONNECTORS PROCESSING INFORMATION Applicable process: assemble to board REFERENCE DATA Application Specification TA-0941 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 ELECTRICAL 50 Ω 75 Ω 0 - 10 GHz 0 - 1,5 GHz max.0,05 up to 1 GHz; max. 0,01 up to 10 Ghz max.0,01 up to 1,5 GHz Peak voltage 750 V eff. 750 V eff. Operating voltage 250 V eff. 250 V eff. 1 x 103 MΩ initially, 1 x 103 MΩ initially, -650C to +1650C -650C to +1650C Electrical characteristic impedance Working frequency Reflection coefficient Insulation resistance Temperature range 162 www.fci.com/metral Header, straight, DIN standard, Coax PRODUCT Wide Body Housing Narrow Body Housing 13.6 3 1.7 4.4 3 12.0 11.5 13.8 12 11.5 5.0 4.4 5 15.8 12.4 Ø 4.8 11.95 11.95 15.90 17 0.98 PCB pattern P9, see chapter PCB layouts Coax inserts 9.60 Ø3 A 9.60 Ø5.25 Ø4.15 Ø4.15 1.15 Ø4.8 5.5 B Ø5.25 1.15 HYBRID CONNECTORS 5.9 PARTNUMBERS Housings Partnumber Description 70290-001LF Header STR-narrow body 88911-101LF Header STR-wide body Coax inserts Partnumber Description impedance length PCB thickness 70200-005LF receptacle/receptacle coax coupler 50 Ω 28,4 mm 4,8 mm 70212-005LF receptacle/receptacle coax coupler 75 Ω 28,3 mm 4,8 mm RA = right angle, STR = straight, STB = solder-to-board, PF = press-fit www.fci.com/metral 163 METRAL® HYBRID CONNECTORS Receptacle, right angle, DIN standard, Coax FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Insert according to DIN 41626 Insert quality tested according to MIL-Std-202 and BS 9525 F0011 TECHNICAL DATA PHYSICAL MATING DATA Housing material: glass filled LCP Flammability rating: UL 94 V-0 Insert material shell Copper zinc 39 Pb 2 Spring : Beryllium copper Insulator: PTFE Teflon Clip: BerylliumCopper Performance level Telcordia CO Hybrid DIN standard receptacle, coax, page 163 housing, partnumber coupler, partnumber 88911-101LF 70200-001LF ELECTRICAL (see table below) MECHANICAL PERFORMANCE TYPICAL APPLICATIONS Insertion force, 0.9 N Extraction Force 0.9 N PACKAGING Standard boxes/bags HYBRID CONNECTORS PROCESSING INFORMATION Applicable process: wave/IR / vapor phase / press-fit REFERENCE DATA Application Specification TA-0941 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 ELECTRICAL 50 Ω 75 Ω 0 - 10 GHz 0 - 1,5 GHz max.0,05 up to 1 GHz; max. 0,01 up to 10 Ghz max.0,01 up to 1,5 GHz Peak voltage 750 V eff. 750 V eff. Operating voltage 250 V eff. 250 V eff. 1 x 103 MΩ initially, 1 x 103 MΩ initially, -650C to +1650C -650C to +1650C Electrical characteristic impedance Working frequency Reflection coefficient Insulation resistance Temperature range 164 www.fci.com/metral Receptacle, right angle, DIN standard, Coax PRODUCT Housings PCB pattern P10, see chapter PCB layouts Coax inserts 17.23 4.75 Ø 4.0 8.64 4.32 2.5 4.29 6.8 3 Ø 4.76 Ø 5.25 A 17.65 3.2 9.3 B 2.5 2.52 0.7 5.5 5.7 Ø 0.8 6.5 5 0.3 4.75 5.25 4.8 Ø 0.6 HYBRID CONNECTORS 5 Ø 5.08 4.32 PARTNUMBERS Housings Partnumber 89092-101LF Description receptacle housing STR Coax inserts Partnumber 93904-001LF Description header coax insert STR stb impedance 50 Ω 93903-001LF header coax insert STR stb 75 Ω 72096-101LF header coax insert STR pf 50 Ω RA = right angle, STR = straight, STB = solder-to-board, PF = press-fit www.fci.com/metral 165 METRAL® HYBRID CONNECTORS Header, Mini Coax FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Insert according to DIN 41626 Insert quality tested according to MIL-Std-202 and BS 9525 F0011 TECHNICAL DATA PHYSICAL MATING DATA Housing material: glass filled LCP Flammability rating: UL 94 V-0 Insert material shell Copper zinc 39 Pb 2 Spring : Beryllium copper Insulator: PTFE Teflon Clip: BerylliumCopper Performance level Telcordia CO Right angle, page 169 housing, partnumber insert, partnumber 70244-102LF 70239-001LF ELECTRICAL (see table below) MECHANICAL PERFORMANCE Insertion force, 0.9 N Extraction Force 0.9 N PACKAGING Standard boxes/bags TYPICAL APPLICATIONS HYBRID CONNECTORS PROCESSING INFORMATION Applicable process: wave/IR / vapor phase / press-fit REFERENCE DATA Application Specification TA-0941 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 ELECTRICAL 50 Ω 75 Ω 0 - 10 GHz 0 - 1,5 GHz max.0,05 up to 1 GHz; max. 0,01 up to 10 Ghz max.0,01 up to 1,5 GHz Peak voltage 750 V eff. 750 V eff. Operating voltage 250 V eff. 250 V eff. 1 x 103 MΩ initially, 1 x 103 MΩ initially, -650C to +1650C -650C to +1650C Electrical characteristic impedance Working frequency Reflection coefficient Insulation resistance Temperature range 166 www.fci.com/metral Header, Mini Coax PRODUCT Housings Right angle Housings Straight 8 1.7 13.6 4 4 12.4 3 4 15.8 8 4 3 2.4 13.8 12 12 11.5 4 0.8 11.95 11.95 17.1 15.9 PCB pattern P12, see chapter PCB layouts 0.98 3.5 3.5 3.3 Inserts Straight 3.3 0.3 0.3 7.8 7.8 Ø 2.6 Ø 2.6 A 3.15 Inserts Right angle 1.36 Ø 2.2 Ø 2.2 1.85 1.45 0.8 22.4 B 3.4 Ø 2.65 B 7.9 110° 110° Ø 0.3 Ø 0.5 3 Ø 3.3 0.6 3 1 3.5 2 4 2 1 0.48 A B 1.85 B 2 2 A Ø 2.6 2.5 Ø 0.5 1 5 2 Ø 2.17 3.3 3.5 3.3 1 3 Ø 2.6 4 0.3 Ø 2.6 PARTNUMBERS Housings Straight Inserts Straight Description Partnumber Description Partnumber length PCB thickness 88913-101LF 6 position STR header-wide body-STB 88980-002LF Mini Coax STR insert- STB - 1,6 mm 88913-111LF 6 position STR header-wide body-PF 88978-001LF Mini Coax STR insert- PF - - 70243-101LF 6 position STR header-narrow body-STB 88971-003LF Mini Coax STR plug/plug coupler 17,40 mm 1,6 mm 70243-111LF 6 position STR header-narrow body-PF Tail length PCB thickness 2,80 mm 1,6 mm Housings Right angle Partnumber 88982-102LF Inserts Right angle Description 6 position RA header-press peg Description Partnumber 88983-001LF Mini Coax RA insert- STB RA = right angle, STR = straight, STB = solder-to-board, PF = press-fit www.fci.com/metral 167 HYBRID CONNECTORS 10 METRAL® HYBRID CONNECTORS Receptacle, Mini Coax FEATURES In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Insert according to DIN 41626 Insert quality tested according to MIL-Std-202 and BS 9525 F0011 TECHNICAL DATA PHYSICAL Housing material: glass filled LCP Flammability rating: UL 94 V-0 Insert material shell Copper zinc 39 Pb 2 Spring : Beryllium copper Insulator: PTFE Teflon Clip: BerylliumCopper Performance level Telcordia CO MATING DATA Straight, page 167 housing, partnumber insert, partnumber 88913-111LF 88978-001LF ELECTRICAL (see table below) Right angle, page 167 MECHANICAL PERFORMANCE housing, partnumber insert, partnumber Insertion force, 0.9 N Extraction Force 0.9 N 88982-102LF 89030-001LF PACKAGING Standard boxes/bags PROCESSING INFORMATION TYPICAL APPLICATIONS HYBRID CONNECTORS Applicable process: wave/IR / vapor phase REFERENCE DATA Application Specification TA-0941 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 ELECTRICAL 50 Ω 75 Ω 0 - 10 GHz 0 - 1,5 GHz max.0,05 up to 1 GHz; max. 0,01 up to 10 Ghz max.0,01 up to 1,5 GHz Peak voltage 750 V eff. 750 V eff. Operating voltage 250 V eff. 250 V eff. 1 x 103 MΩ initially, 1 x 103 MΩ initially, -650C to +1650C -650C to +1650C Electrical characteristic impedance Working frequency Reflection coefficient Insulation resistance Temperature range 168 www.fci.com/metral Receptacle, Mini Coax PRODUCT 8 4 Housings 12.44 4 8.8 11.3 2.5 2.8 A 10 4 11.95 4 9.5 PCB pattern P12, see chapter PCB layouts Inserts 19 3.4 110° 0.6 11.2 3.5 4.25 110° 4 4 8.5 A 2.5 Ø 3.3 Ø 2.6 HYBRID CONNECTORS B PARTNUMBERS Housings Partnumber Description 70244-102LF 6 position RA housing Inserts Partnumber Description type PCB thickness 70239-001LF Mini Coax RA insert- 2 position STB 1,6 mm RA = right angle, STR = straight, STB = solder-to-board, PF = press-fit www.fci.com/metral 169 170 www.fci.com/metral CABLE CONNECTORS METRAL® CABLE CONNECTORS METRAL® CABLE CONNECTORS Cable connectors, Signal Cable connectors, Shielded www.fci.com/metral 171 METRAL® CABLE CONNECTORS Cable Connectors, 4 row, signal FEATURES Interface compatible with IEC 61076-4-104 backpanel connectors Next generation design offers easy and fast cable assembly Four Row versions provide 24 or 48 dual beam contacts Insulation displacement design offers quick termination without the need to strip conductors Active backshell latches securely connect assembled cable connectors to standard Metral® headers Different latch designs are available to satisfy ergonomic and mechanical requirements End-stackable cable connectors enable adjacent connectors to plug to headers without loss of positions Application tooling supported by FCI TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm contact material: Phosphor bronze contact plating: Gold over nickel on mating face; pure tin over nickel in termination area housing Material: Glass filled 612 Polyamide UL 94-V0 performance level: Telcordia CO Header, straight, press-fit, page 27 1 module – part number 70232-116LF 2 modules – part number 70233-116LF 4 modules – part number 70234-116LF 8 modules – part number 70235-116LF ELECTRICAL current Rating: 1.0A per contact withstanding Voltage: 1000 VDC insulation resistance: >1000 mega ohms after environmental exposure CABLE CONNECTORS MECHANICAL PERFORMANCE mating force: <1.0 Newtons per contact un-mating force: >.2 Newtons per contact; <1.13 Newtons per contact IDC termination retention: <.89 Newtons per contact durability: 200 cycles (Telcordia) temperature: -55C to +105 C TYPICAL APPLICATIONS ENVIRONMENTAL meets Telcordia Central Office and IEC Class 1 requirements. Additional platings are also available to meet uncontrolled environmental requirements; consult product drawings and product specifications for the cable connectors and mating headers. PACKAGING kits REFERENCE DATA UL E66906, CSA LR46923 Product Specifications: Application Specifications: Application tooling: GS-12-015 (4 Row) GS-20-002 (4 Row) GS-20-003 (4 Row) APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 172 www.fci.com/metral Cable Connectors, 4 row, signal PRODUCT 1 Module 72476-1yx1LF 13. 9 13. 9 45.0 0 24. 45.0 0 12. 2 Module 72477-1yx1LF STANDARD LATCH FINGER FOR CABLE TIE BELOW LATCH FINGER AND EASIEST ACCESS TO LATCH FINGER STANDARD LATCH FINGER FOR CABLE TIE BELOW LATCH FINGER AND EASIEST ACCESS TO LATCH FINGER SHORT LATCH FINGER FOR CABLE TIE ABOVE LATCH FINGER AND LARGER CABLE SIZE CAPACITY SHORT LATCH FINGER FOR CABLE TIE ABOVE LATCH FINGER AND LARGER CABLE SIZE CAPACITY standard latch = for cable up to 6.00mm diameter short latch = for cable up to 9.00mm diameter PARTNUMBERS 72476 - 1yx1LF Base Part Number Performance Latch style (y) Wire/conductor style (x) 1 = standard finger latch for easiest actuation 2 = short finger latch for extra large cable www.fci.com/metral LF LF = lead free 1 = Telcordia CO 72476 = 1 module, 4 x 6 pos. 72477 = 2 module, 4 x 12 pos. 1 CABLE CONNECTORS 72477 - 1yx1LF 1 = 26 to 24 AWG size 2 = 30 to 28 AWG size 173 METRAL® CABLE CONNECTORS Cable Connectors, 5 row, signal FEATURES Interface compatible with IEC 61076-4-104 backpanel connectors Next generation design offers easy and fast cable assembly Five Row versions provide 30 or 60 dual beam contacts Insulation displacement design offers quick termination without the need to strip conductors Active backshell latches securely connect assembled cable connectors to standard Metral® headers Different latch designs are available to satisfy ergonomic and mechanical requirements End-stackable cable connectors enable adjacent connectors to plug to headers without loss of positions Application tooling supported by FCI TECHNICAL DATA MATING DATA PHYSICAL spacing: 2,00 mm x 2,00 mm contact material: Phosphor bronze contact plating: Gold over nickel on mating face; pure tin over nickel in termination area housing Material: Glass filled 612 Polyamide UL 94-V0 performance level: Telcordia CO Header straight, press-fit, page 41 1 module – part number 89006-116LF 2 modules – part number 89007-116LF 4 modules – part number 89008-116LF 8 modules – part number 89009-116LF ELECTRICAL current Rating: 1.0A per contact withstanding Voltage: 1000 VDC insulation resistance: >1000 mega ohms after environmental exposure CABLE CONNECTORS MECHANICAL PERFORMANCE mating force: <1.0 Newtons per contact un-mating force: >.2 Newtons per contact; <1.13 Newtons per contact IDC termination retention: <.89 Newtons per contact durability: 200 cycles (Telcordia) temperature: -55C to +105 C TYPICAL APPLICATIONS ENVIRONMENTAL meets Telcordia Central Office and IEC Class 1 requirements. Additional platings are also available to meet uncontrolled environmental requirements; consult product drawings and product specifications for the cable connectors and mating headers. PACKAGING kits REFERENCE DATA UL E66906, CSA LR46923 Product Specifications: Applicationspecification: Application tooling : GS-12-016 (5 Row) GS-20-003 (5 Row) GS-20-003 (5 Row) APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 174 www.fci.com/metral Cable Connectors, 5 row, signal PRODUCT 1 Module 72478-1yx1LF 16. 9 16. 9 45.0 0 24. 45.0 0 12. 2 Module 72479-1yx1LF STANDARD LATCH FINGER FOR CABLE TIE BELOW LATCH FINGER AND EASIEST ACCESS TO LATCH FINGER SHORT LATCH FINGER FOR CABLE TIE ABOVE LATCH FINGER AND LARGER CABLE SIZE CAPACITY STANDARD LATCH FINGER FOR CABLE TIE BELOW LATCH FINGER AND EASIEST ACCESS TO LATCH FINGER SHORT LATCH FINGER FOR CABLE TIE ABOVE LATCH FINGER AND LARGER CABLE SIZE CAPACITY standard latch = for cable up to 6.00mm diameter short latch = for cable up to 9.00mm diameter PARTNUMBERS 72478 - 1yx1LF Base Part Number Performance Latch style (y) Wire/conductor style (x) 1 = standard finger latch for easiest actuation 2 = short finger latch for extra large cable www.fci.com/metral LF LF = lead free 1 = Telcordia CO 72478 = 1 module, 5 x 6 pos. 72479 = 2 module, 5 x 12 pos. 1 CABLE CONNECTORS 72479 - 1yx1LF 1 = 26 to 24 AWG size 2 = 30 to 28 AWG size 175 METRAL® CABLE CONNECTORS Cable connectors, shielded FEATURES Contact type Signal - Shielded Number of contacts (per row) 24 Number of contacts (Total) 72 Number of rows 3 Orientation Straight Product Type Receptacle Termination Style IDC - Crimp Mating half 10022805-201LF Quantity 96 Dimensional Size (Wire) AWG 26 TECHNICAL DATA PHYSICAL contact material: Phosphor bronze plating Telecom class Gold plating (Contact area) 2 μm (79 μin.) Gold plating Specification (Tail area) Telecom class Gold housing Material: Glass - Filled Thermoplastic Polyester performance level: Telcordia CO MATING DATA mating part, page 200 Mating half 10022805-101LF ELECTRICAL current Rating: 1.0A per contact withstanding Voltage: 1000 rms insulation resistance: >1000 mega ohms after environmental exposure CABLE CONNECTORS MECHANICAL PERFORMANCE Insertion force (max per contact) 1.1N max. per contact withdrawal Force 0.15N min. per contact retention force 5N durability: 100 cycles (Telcordia) temperature: -55C to +105 C ENVIRONMENTAL meets Telcordia Central Office and IEC Class 1 requirements. Additional platings are also available to meet uncontrolled environmental requirements; consult product drawings and product specifications for the cable connectors and mating headers. PACKAGING bags REFERENCE DATA Literature 950511-001 product specification: GS-12-308 Packaging specification: GS-14-008 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 176 www.fci.com/metral Cable connectors, shielded PRODUCT 44.9 27.2 7 55 10013881 - 231LF CABLE CONNECTORS PARTNUMBERS = 72 position IDC cable connector www.fci.com/metral 177 178 www.fci.com/metral METRAL® ACCESSORIES ACCESSORIES METRAL® ACCESSORIES Coding Keys Guide Pin Ramping Module Shorting Clip End wall Hybrid housing www.fci.com/metral 179 METRAL® ACCESSORIES Coding Keys FEATURES designed in accordance with IEC 61076-4-104 User friendly system, easy application. No additional space required. Provides infinite number of coding possibilities for board to board connection. Extended keys for early engagement (for 5 row only). Standard coding, codes all METRAL connectors when mating length is not exceeding 6,5 mm. Extended keys codes from 5 up to 8 mm mating length. TECHNICAL DATA PHYSICAL Material: Glass - Filled Thermoplastic Polyester MECHANICAL PERFORMANCE temperature: -55 0C to +125 0C ENVIRONMENTAL RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING 100 parts, min. order quantity 100 parts ACCESSORIES TYPICAL APPLICATIONS 180 www.fci.com/metral Coding Keys Receptacle Coding Header Coding Receptacle Coding Header Coding PARTNUMBERS Extended IEC standardized mating pair 6,3 6,3 8,3 up to 6,5 mm pin length IEC standardized up to 8,0 mm pin length Extended 8,3 up to 6,5 mm pin length up to 8,0 mm pin length Full Header Key Full Header Key 90837-102LF green 85811-101LF green Full Full Receptacle Key Full Receptacle Key 91210-101LF green 85812-101LF green Full Left Receptacle Key Left Receptacle Key Right Header Key Right Header Key 91290-102LF pink 85814-102LF pink 91289-102LF pink 85813-102LF pink Middle Receptacle Key Middle Receptacle Key Middle Header Key Middle Header Key 91290-103LF brown 85814-103LF brown 91289-103LF brown 85813-103LF brown ACCESSORIES Left Middle Right Receptacle Key Right Receptacle Key Left Header Key Left Header Key 91290-101LF blue 85814-101LF blue 91289-101LF blue 85813-101LF blue Right Note: blue marked part numbers are product selector parts www.fci.com/metral 181 METRAL® ACCESSORIES Cable Connector Coding Keys FEATURES designed in accordance with IEC 61076-4-104 User friendly system, easy application. No additional space required. Applicable for 4 and 5 row cable connectors. Provides 18 coding possibilities for cable to board connections. TECHNICAL DATA PHYSICAL Material: Glass - Filled polyamide MECHANICAL PERFORMANCE temperature: -55 0C to +125 0C ENVIRONMENTAL RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING 100 parts, packed by bags REFERENCE DATA ACCESSORIES Application Specifications: GS-20-002 (4 Row) GS-20-003 (5 Row) TYPICAL APPLICATIONS Male Coding Female Coding 182 www.fci.com/metral Cable Connector Coding Keys PRODUCT 3.8 10.6 1.5 PARTNUMBERS 72388 - yyyyLF Base Part Number Configuration LF LF = lead free yyyy Key number 0011 1 0021 2 0031 3 0041 4 0051 5 0061 6 0071 7 0081 8 0091 9 0101 10 0111 11 0121 12 0131 13 0141 14 0151 15 0161 16 0171 17 0181 18 www.fci.com/metral ACCESSORIES 72388 = Coding Key Cable connector 183 METRAL® ACCESSORIES Guide Pin FEATURES Early capture of daughter card. Stackable end-to-end without loss of position. Stackable with other METRAL function modules (e.g. signal, power, coax). Front and/or rear guiding. Plug polarization by design. TECHNICAL DATA PHYSICAL MATING DATA Guide pin material: stainless steel ENVIRONMENTAL mating part, page ……. RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Receptacle housing: part no 70292-101LF, Header housing, narrow body: part no 70290-101LF, wide body: part no 88911-101LF, 100 parts, min. order quantity 100 parts APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 ACCESSORIES TYPICAL APPLICATIONS 184 www.fci.com/metral page 157 page 155 page 155 Guide Pin PRODUCT 15.9 15.9 D L2 20.02 20.02 31 20.02 31 Single Guide Pin L1 31 Double Guide Pin PCB pattern P9, see chapter PCB layouts PARTNUMBERS Narrow Body Header Housing Guide Pin Type double sided Part number Guide Pin Required Header Housing Required Receptacle Housing short 20,0 mm 70295-001LF (1x) 70290-101LF (1x) 70292-101LF long 31,0 mm 70295-002LF (1x) 70290-101LF (1x) 70292-101LF short 20,0 mm 70295-003LF (2x) 70290-101LF (2x) 70292-101LF long 31,0 mm 70295-004LF (2x) 70290-101LF (2x) 70292-101LF ACCESSORIES single sided guide pin length Wide Body Header Housing Guide Pin Type single sided double sided guide pin length Part number Guide Pin Required Header Housing Required Receptacle Housing short 20,0 mm 70295-001LF (1x) 88911-101LF (1x) 70292-101LF long 31,0 mm 70295-002LF (1x) 88911-101LF (1x) 70292-101LF short 20,0 mm 70295-003LF (2x) 88911-101LF (2x) 70292-101LF long 31,0 mm 70295-004LF (2x) 88911-101LF (2x) 70292-101LF Note: Housings not supplied with guide pins For detais on housings see section Hybrid Headers and receptacles www.fci.com/metral 185 METRAL® ACCESSORIES Board-to-Board Keying system FEATURES Daughter card keying Provides 20 keying combinations Modular design guarantees flexibility Stackable end-to-end without loss of position Engagement before 8.25 mm pins Precedes card latch engagement Receptacle available as 20 unique molded parts TECHNICAL DATA PHYSICAL MATING DATA Keying pin material: stainless steel Housing material: Glass filled LCP,UL94V-0 Shroud, wide body 6 position, page 167 part number 88913-101LF ENVIRONMENTAL Operating temperature -55˚C to +105C˚ RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING Receptacle housing: 50 housing/bag Keying pins with screws: 300 pins/bag TYPICAL APPLICATIONS PROCESSING INFORMATION ACCESSORIES Wave, IR Vapor phase 186 www.fci.com/metral Board-to-Board Keying system PRODUCT Receptacle Keying module with press peg Keying Pin 27.1 11.95 8 17.1 23 4 4 15.8 11.3 5.20 11.95 = denotes plugged position 9.5 5.88 PARTNUMBERS Base Part Number Pin Configuration LF 88914 - 0yyLF Keying Pin pin configuration pcb thickness 011 2,31 - 3,10 mm 012 3,10 - 3,89 mm 013 3,89 - 4,67 mm 88916 - 2yyLF Receptacle Keying module with press peg pin configuration ACCESSORIES LF = lead free 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 www.fci.com/metral 187 METRAL® ACCESSORIES Ramping Module FEATURES Provides initial vertical alignment on daughter card Symmetrical application; 2 required per slot Utilizes 6 mm of slot space Provides end-caps for backplane header slots Used independently of cabinet hardware design TECHNICAL DATA PHYSICAL ramping module material, glass-filled nylon, color natural , UL94 V-0. MATING DATA Used in combination with Header MECHANICAL PERFORMANCE temperature: -55C to +105 C ENVIRONMENTAL RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC PACKAGING ACCESSORIES Bag of 500 pieces 4 row Header straight, solder-to-board, 1 mod, part number 88951-101LF 2 mod, part number 88952-101LF 4 mod, part number 88953-101LF 8 mod, part number 88954-101LF page 25 4 row Header straight, press-fit, 1 mod, part number 70232-116LF 2 mod, part number 70233-116LF 4 mod, part number 70234-116LF 8 mod, part number 70235-116LF page 27 TYPICAL APPLICATIONS 188 www.fci.com/metral Ramping Module PRODUCT 8.84 1.54 5.64 15.8 5.08 B A 2.5 5.95 PCB pattern P19, see chapter PCB layouts PARTNUMBERS 88910 - yyyLF Base Part Number Configuration LF LF = lead free yyy ramp height (dim. A) ramp height (dim. B) 011 25,30 20,36 012 33,15 28,06 www.fci.com/metral ACCESSORIES 88910 = Ramping Module 189 METRAL® ACCESSORIES Shorting Clip header, 4 row, signal, straight, press-fit, wide body FEATURES shorts any adjacent pin pair in row A of the Header signal pins mate before shorting clips break In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO MATING DATA Receptacle, right angle, press-fit, page 35 ELECTRICAL 1 mod – part number 88945-102LF 2 mod – part number 88946-102LF 4 mod – part number 88947-102LF 8 mod – part number 88948-102LF current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, solder-to-board, page 33 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm 1 mod – part numbers 89035-101LF 2 mod – part numbers 89036-101LF 4 mod – part numbers 89037-101LF 8 mod - part numbers 89038-101LF Receptacle, right angle, Pin-in-Paste, page 37 1 mod – part numbers 52048-101LF ENVIRONMENTAL ACCESSORIES Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION Applicable process: press-fit REFERENCE DATA file no. GS-12-180 application specification: BUS-20-073 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 190 www.fci.com/metral Shorting Clip header, 4 row, signal, straight, press-fit, wide body PRODUCT 17 1 6 11 22 24 2.3 D C B A 2 3.5 15.8 11.5 0.5 2 A 23.98 B PCB pattern P6, see chapter PCB layouts PARTNUMBERS 72013 - 1yyyLF 72013 = 4 row header, straight, wide body, including shorting clips Performance Pin Configuration 1 = Telcordia CO LF LF = lead free yyy modules no. of positions mating length A tail lengthB shorting clip at on request only 1 4x 6 5,75 mm 4,30 mm all row A pins 003 2 4 x 12 5,75 mm 4,30 mm all row A pins 004 3 4 x 24 5,75 mm 4,30 mm all row A pins 005 4 4 x 48 5,75 mm 4,30 mm all row A pins ACCESSORIES Base Part Number row A A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 191 METRAL® ACCESSORIES Shorting Clip header, 5 row, signal, straight, press-fit, wide body FEATURES shorts any adjacent pin pair in row A of the Header signal pins mate before shorting clips break In accordance with IEC 60917 and IEC 61076-4-104 (Futurebus+) Eye of the needle press-fit contact TECHNICAL DATA PHYSICAL spacing: 2,00 mm x 2,00 mm housing: glass-filled LCP, colour natural flammability rating: UL 94 V-0 pin material: phosphor bronze performance level: Telcordia CO ELECTRICAL MATING DATA current rating: 1 A insulation resistance: 5x103 MΩ initially, 1x103 MΩ after tests withstanding voltage: 1000 V rms (sea level) Receptacle, right angle, press-fit, pag 45 1 mod – part number 89047 2 mod – part number 89093 4 mod – part number 89094 8 mod – part number 89095 MECHANICAL PERFORMANCE insertion force: 0,45 N max. per individual signal contact (mating) withdrawal force: 0,15 N max. per individual signal contact (unmating) press-fit contact insertion: 65 N max. per pin press-fit pin withdrawal: 15 N min. per pin recommended hole diameter: 0,65-0,80 mm Receptacle, right angle, solder-to-board, page 43 1 mod – part numbers 85863 2 mod – part numbers 85864 4 mod – part numbers 85865 8 mod - part numbers 85866 ENVIRONMENTAL ACCESSORIES Operating temperature range: -55˚C to +125˚C RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC TYPICAL APPLICATIONS PACKAGING standard: tubes PROCESSING INFORMATION press fit REFERENCE DATA file no. GS-12-180 application specification: BUS-20-073 APPLICATION EQUIPMENT for application equipment, check out the application equipment table on page 217-223 192 www.fci.com/metral Shorting Clip header, 5 row, signal, straight, press-fit, wide body PRODUCT 17 22 11 2 3.50 1 24 E D C B A 2 8 2.3 13.5 0.5 17.8 2.0 A B 23.98 PCB pattern P7, see chapter PCB layouts PARTNUMBERS 72015 - 1yyyLF 72015 = 5 row header, straight, wide body, including shorting clips yyy modules Performance Pin Configuration 1 = Telcordia CO no. of positions mating length A LF LF = lead free tail lengthB shorting clip at 003 1 5x 6 5,75 mm 4,30 mm all row A pins on request only 2 5 x 12 5,75 mm 4,30 mm all row A pins on request only 3 5 x 24 5,75 mm 4,30 mm all row A pins on request only 4 5 x 48 5,75 mm 4,30 mm all row A pins ACCESSORIES Base Part Number row A A B Note: for other special patterns or loadings, please check drawings, all other configurations on request only www.fci.com/metral 193 METRAL® ACCESSORIES End wall FEATURES End wall can be used on either side of the Header Latch feature to prevent mismatch Protection feature Match with 4 row and 5 row shroud TECHNICAL DATA PHYSICAL housing: 30% glass-filled flame retardant accessory, color natural, flammability rating: UL 94 V-0 The housing withstand exposure to 260˚C peak temperature for 15 seconds in a wave solder application with 1.5mm minimum PCB. MATING DATA 4 row ENVIRONMENTAL RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC Shroud, part number 70203-xxxLF, Hybrid header housing, part number 88911-xxxLF, part number 88913-xxxLF, page 83 page 155 page 159 5 row REFERENCE DATA Product specification GS-12-199 Shroud, part number 89055-xxxLF, page 85 Header, part number 89006-116LF (1 mod), 89007-116LF (2 mod), 89008-116LF (4 mod) and 89009-116LF (8 mod), page 41 ACCESSORIES TYPICAL APPLICATIONS 194 www.fci.com/metral End wall PRODUCT End Wall 73996-002 73996-011 ( 4 row application ) ( 5 row application ) 12.63 2.65 17.5 19.4 0.8 1.25 11.95 1.25 11.88 17 PARTNUMBERS Base Part Number Configuration 73996 = End Wall ACCESSORIES 73996 - yyyLF LF LF = lead free yyy description 002 4 row Shroud & Hybrid housing 011 5 row Shroud & Header www.fci.com/metral 195 METRAL® ACCESSORIES Hybrid housing FEATURES create stand off of 3,5 mm can be used for DIN standard power, coax and guide pin TECHNICAL DATA PHYSICAL housing: glass-filled LCP, color natural flammability rating: UL 94 V-0 temperature withstanding till 260C for 60 seconds MATING DATA Guide Pin, page 185 part number 70295-00XLF ENVIRONMENTAL RoHs information, this product is compatible according to the European Union Directive 2002/95/IEC Screw to board high power insert, page 155 part number 91570-001LF Plug / plug high power coupler, page 155 part number 70201-001LF PROCESSING INFORMATION Receptacle / receptacle coax coupler, page 163 part number 70200-001LF Infra-red or vapor phase reflow oven RECOMMENDED HOLE DIAMETER ACCESSORIES 4 row Hybrid header housing in combination with 196 Hole diameter (unplated) guide pin 3,25 mm +/-0,10 mm screw to board high power insert 3,25 mm +/-0,10 mm plug / plug high power coupler 6,00 mm +0,10 mm receptacle / receptacle coax coupler 6,00 mm +0,10 mm TYPICAL APPLICATIONS www.fci.com/metral Hybrid housing PRODUCT 3.5 1.7 6.7 5 12 15.8 11.95 2.5 0.97 10 PCB pattern P25, see chapter PCB layouts PARTNUMBERS Base Part Number 63735 = 4 row Hybrid header housing Configuration 101 www.fci.com/metral ACCESSORIES 63735 - 101LF LF LF = lead free 197 198 www.fci.com/metral METRAL® APPLICATION SPECIFIC METRAL® APPLICATION SPECIFIC Mono blocks APPLICATION SPECIFIC Customized designs www.fci.com/metral 199 METRAL® APPLICATION SPECIFIC The products shown give an impression of the capabilities within the METRAL® core family 8 module Signal & 2 module Power contact assembly with fixed modules Note: all configurations are customer specific, new configurations on request only, please contact your local sales representative. Signal Header right angle including Latch and Guiding PARTNUMBER HM1B61LDP258H6PLF APPLICATION SPECIFIC Shielded Header 72 position (3 x 24 pos.) solder-to-board mating part, cable connector Shielded part number 10013381-231LF, page 177 PARTNUMBER 10022805-101LF 200 www.fci.com/metral The products shown give an impression of the capabilities within the METRAL® core family Monoblocks, various Headers and Receptacles Note: all configurations are customer specific, new configurations on request only, please contact your local sales representative. E1-T1 Connectors, 2Mb Field I/O connector system 2 Mb - FieldIO - coax: 2 Mb - FieldIO - STP: Part number: 10001783-001LF Part number: 10007370-001LF Field Application tooling: BPY 506 APPLICATION SPECIFIC Product specification: GS-12-219 Application specification: GS-20-032 www.fci.com/metral 201 202 www.fci.com/metral FUTURE BUS TECHNICAL SPECIFICATION METRAL® TECHNICAL SPECIFICATION METRAL® TECHNICAL SPECIFICATION Future Bus IPCI Bus Performance Specifications Electrical Specifications Process Specifications www.fci.com/metral 203 TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION METRAL® FUTUREBUS versus HARD METRIC FUTUREBUS METRAL® Core METRAL® High Speed HARD METRIC Millipacs Airmax 204 www.fci.com/metral TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION METRAL® IPCI Bus FCI Electronics METRAL® connector system was chosen as the interconnection system for the IPCI (Industrial peripheral computer Interface) The following are typical 3SU and 6SU board configurations Daughter Board Backpanel Receptacle Right-Ang