Frontier Electronics Corp. 667 E. COCHRAN STREET, SIMI VALLEY, CA 93065 TEL: (805) 522-9998 FAX: (805) 522-9989 E-mail: [email protected] Web: http://www.frontierusa.com 10A HIGH CURRENT BRIDGE RECTIFIERS BP10-005L THRU BP10-10L FEATURES z CURRENT RATING 10A z REVERSE VOLTAGE RATING UP TO 1000V z TYPICAL IR LESS THAN 1μA z HIGH TEMPERATURE SOLDERING GUARANTEED: 260°C /10 SECOND .442（11.23） .432（10.97） 1.13（28.7） MECHANICAL DATA z CASE: METAL HEAT SINK CASE, ELECTRICALLY INSULATED DIMENSIONS IN INCHES AND (MILLIMETERS) z TERMINALS: UNIVERSAL .25” (6.3 mm) FAST ON z MOUNTING METHOD: BOLT DOWN ON HEAT SINK WITH SILICON THERMAL COMPOUND BETWEEN BRIDGE AND MOUNTING SURFACE FOR MAXIMUM HEAT TRANSFER EFFICIENCY z WEIGHT: 20 GRAMS 1.12（28.4） － AC ＋ .550 （13.9） .140（3.6） .75 （19.1） .120（3.05） .040（1.2） .200 （5.1） MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS RATINGS AT 25°C AMBIENT TEMPERATURE UNLESS OTHERWISE SPECIFIED SINGLE PHASE, HALF WAVE, 60 HZ, RESISTIVE OR INDUCTIVE LOAD. FOR CAPACITIVE LOAD, DERATE CURRENT BY 20% RATINGS MAXIMUM RECURRENT PEAK REVERSE VOLTAGE MAXIMUM RMS VOLTAGE MAXIMUM DC BLOCKING VOLTAGE MAXIMUM AVERAGE FORWARD RECTIFIED OUTPUT CURRENT AT TC=55°C PEAK FORWARD SURGE CURRENT SINGLE SINE-WAVE SUPERIMPOSED ON RATED LOAD STORAGE TEMPERATURE RANGE OPERATING TEMPERATURE RANGE SYMBOL BP10-005L BP10-01L BP10-02L BP10-04L BP10-06L BP10-08L BP10-10L UNITS VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 V V V IO 10.0 A IFSM 200 A TSTG - 55 TO + 175 TOP - 55 TO + 175 °C °C ELECTRICAL CHARACTERISTICS (AT TA =25°C UNLESS OTHERWISE NOTED) CHARACTERISTICS SYMBOL BP10-005L BP10-01L BP10-02L BP10-04L BP10-06L BP10-08L BP10-10L UNITS MAXIMUM INSTANTANEOUS FORWARD VOLTAGE PER VF BRIDGE ELEMENT AT SPECIFIED CURRENT MAXIMUM REVERSE DC CURRENT AT RATED DC IR BLOCKING VOLTAGE PER ELEMENT NOTE: SUFFIX NO. VERSUS DIFFERENT CASES AND TERMINALS BP10-005L THRU BP10-10L 1.1 V 10 μA Page: 1 RATINGS AND CHARACTERISTIC CURVES BP10-005L THRU BP10-10L FIG. 1 -MAXIMUM OUTPUT RECTIFIED CURRENT FIG. 4 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT WITH (100mm2×1.5mm) COPPER 10 AVERAGE FORWARD OUTPUT CURRENT, AMPERES PEAK FORWARD SURGE CURRENT, AMPERES 15 WITHOUT HEAT SINK 5 0 20 40 60 400 300 200 100 TJ=175℃ SINGLE SINE-WAVE (JEDEC Method) 40 1 1.5 2 3 4 5 6 7 8910 15 20 80 100 120 140 160 180 30 40 50 70100 NUMBER OF CYCLES AT 60HZ CASE TEMPERATURE TC ℃ FIG. 5 - TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT FIG. 2 - TYPICAL REVERSE CHARACTERISTICS AT TJ=25℃ CAPACITANCE, C.J. pF INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 1.0 0.1 500 400 300 250 200 TJ=25℃ f=1MHZ Vsig=50m Vp-p 150 100 60 .01 1 1.5 2 3 4 5 6 7 8910 15 20 0 20 40 60 80 100 120 140 30 40 50 70100 REVERSE VOLTAGE, VOLTS PERCENT OR RATED PEAK REVERSE VOLTAGE FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS .442（11.23） INSTANTANEOUS FORWARD CURRENT, AMPERES 1000 .432（10.97） 500 100 1.13（28.7） 50 1.12（28.4） － AC ＋ .550 （13.9） 10 5 1.0 .75 （19.1） .140（3.6） .120（3.05） .040（1.2） .200 （5.1） TJ=25℃ 300us Pulse Width 1% Duty Cycle 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 BP10-L IN LINE PIN CONFIGURATION (PLASTIC CASE) INSTANTANEOUS FORWARD VOLTAGE, VOLTS BP10-005L THRU BP10-10L Page: 2