ALARM SETTER WITH DIGITAL DISPLAY DATA SHEET PCP This product is a digital type alarming indicator whose front face measures 48 x 48 mm. FEATURES 1. Eight alarm modes are selectable for a variety of applications. 2. Front-face waterproof structure (NEMA-4X) is available. 3. SPDT contact relay output is provided in a pair. 4. Input signal and measurable range are changeable by key operation. SPECIFICATIONS Operational specifications Input section: No. of inputs: 1 point Input signal: See table 1. Measuring range: See table 1. Burnout function: Upscale or downscale burnout settable The instrument with burnout releasing function can also be specified. Input sampling period: 0.5 sec Input impedance: Voltage input; 1MΩ or 450kΩ or more Current input; 250Ω (external mounted resistor) Thermocouple; 1MΩ or more Allowable resistance of signal supply: Thermocouple input; 100Ω or less Voltage input; 1kΩ or less Alarm output: No. of outputs 2 points of SPDT contact Kinds of alarm: See table 2. each point independently settable Contact capacity: 220V AC/30V DC, 3A (resistance load) 220V AC/30V DC,1A (inductive load) Alarm value settable range: -5 to 105% FS (each point independently settable) Hysteresis settable range: 0 to 102% FS (each point independently settable) Alarm action delay time: Settable within 1 to 10 sec Alarm action delay time at power-on: Settable within 0 to 20 sec Indicating section: Numerical indication: 7-segment, 4-digit LED (upper stage red, lower stage green) Indicated contents: Alarm set value 1, alarm set value 2, measured value Status indication: Red/green LED lamp. alarm occurrence, power ON, measured value indication Indicating accuracy: Thermocouple input: ± 0.5% FS ± 1 digit ± 3˚C (For B thermocouple 0 to 400˚C, ± 5% FS ±1 digit ±3˚C) (For R thermocouple 0 to 500˚C, ± 1% FS ±1 digit ±3˚C) Resistance bulb input: ± 0.5% FS ± 1 digit Voltage/current input: ± 0.5% FS ± 1 digit Rated voltage: 100 (-15%) to 240 (+10%)V AC 50/60Hz 24V AC (± 10%) 50/60Hz 24V DC (± 10%) Power consumption: 6VA max. (at 100V AC or 24V AC) 8VA max. (at 200V AC) 3W max. (at 24V DC) Ambient temperature: -10 to 50˚C External dimensions: 48 (W) x 48 (H) x 93 (D) mm Casing color: White or black (when front is waterproof) Mass : Approx.150 g Mounting method: Panel flush mounting or rail mounting (According to specified socket) (Note) For socket, see OUTLINE DIAGRAM Input signal and measuring range • Table 1 Input signal Resistance bulb JIS (IEC) Resistance bulb JIS (IEC) Group I (Note 1) Group II Measurable range (℃)(Note 2) Minimum span (℃) Pt100Ω -150 to 800 150 JPt100Ω -150 to 600 150 J 0 to 800 ThermoK 0 to 1200 couple R 0 to 1600 B 0 to 1800 T 0 to 1600 E -199 to 400 S -199 to 800 N 0 to 1300 PL-II 0 to 1300 DC voltage DC1 to 5V Scalable range DC0 to 5V -1999 to 9999 DC current DC4 to 20mA 400 400 1600 1800 1600 599 800 1300 1300 Group III Thermistor Fuji-made thermistor -50 to 100 0 to 150 150 150 Note 1) Input signal can be changed by key operation within the same group, but cannot be changed between different groups. Note 2) When the measuring range exceed 1000˚C, decimal point cannot be used. EDS10-72b Date Nov. 27, 2003 PCP • Table 2 Kind of alarm Hold value Relay and Alarm method Set value at startup LED action CODE SYMBOLS Action diagram Not provided LED lit,relay excited Upper limit Absolute value provided LED lit,relay excited Absolute value Not provided LED lit,relay unexcited Lower limit Absolute value Not provided LED lit,relay unexcited Upper limit Absolute value provided Lower limit Absolute value provided LED lit,relay unexcited LED lit,relay unexcited 4 Note 1 Input signal Thermocouple Resistance bulb Pt100, 3-wire type Resistance bulb JPt, 3-wire type Note 2 Thermistor DC1 to 5V (Input impedance: 1MΩ) Note 3 DC4 to 20mA DC1 to 5V (Input impedance: 450Ω) T N P H C B A 1 LED lit,relay excited △ △ Revision No. Alarm With 2 alarm points F Instruction manual/power supply Not provided/100 to 240 V AC, 50/60 Hz Japanese version/100 to 240 V AC, 50/60 Hz English version/100 to 240 V AC, 50/60 Hz Not provided/ 24V DC Japanese version/ 24V DC English version/ 24V DC N Y △ △ △ △ V C A B Socket Not provided 0 0 0 4 0 0 For rail mounting, type: TP411X 5 0 0 For panel flush mounting, type: Note 4 TP411SBA Note 4 ▲ Upper limit Description ▲ provided 14 Front size (W x H) 48 x 48mm ▲ Absolute value 9 10 11 12 13 F ▲ Lower limit △ ▲ Absolute value ▲ Lower limit △ ▲ LED lit,relay excited ▲ Not provided ▲ △ Absolute value Y Y 1 PCP Without alarm Upper limit 1 2 3 4 5 6 7 8 With burnout releasing function For rail mounting, type: TP411X P 0 4 How to read action diagram Note 4 For panel flush mounting, Note 4 type: TP411SBA Without socket P 0 5 area : Range in which front LED is lit area : Range in which alarm relay is excited P 0 6 △ : Alarm set value Y D Non-standard specification White casing without front waterproof structure Black casing with front waterproof Note 5 structure (NEMA-4X) Note 1) Input signal has been factory-set as follows. Thermocouple input: K thermocouple 0 to 400˚C Resistance bulb input: 0 to 150˚C Thermistor input: 0 to 150˚C Voltage/current input: Scaling 0 to 100% Note 2) Use a thermistor that matches Fuji Electric's specifications. Note 3) Before use, attach the accessory 250Ω resistor between input terminals. Note 4) If a socket of any type other than specified is used, input accuracy cannot be guaranteed. Note 5) Contact us to select P for the 11th digit, because it is nonstandard. OUTLINE DIAGRAM (Unit:mm) External dimensions 48 85.7 71.5 1 45 Panel +0.5 0 +0.5 0 7 Panel cutout 57 63 MIN. 45 48 Mounting frame 48 44.8 57 63 MIN. Lateral installation of multiple indicators in close contact t Packing 1≦t≦8 (used for front waterproof structure) Mounting frame 45 9.5 +0.5 0 +0.5 0 (48×N-3) Note) Impossible for front waterproof structure 2 CONNECTION DIAGRAM • For AC power supply ＜Measured value input＞ Note 1 6 6 Thermocouple T.C. B 6 250Ω 5 5 4 to 20mA DC A 5 B Thermistor 1 to 5V DC 6 + 5 6 4 SET2 4 Resistance bulb 5 8 SET1 9 3 Alarm output 2 7 2 10 1 Power supply 100 to 240V AC 50/60Hz Alarm output 1 11 • For 24V DC power supply ＜Measured value input＞ Note 1 6 6 Thermocouple T.C. B 6 250Ω 5 5 4 to 20mA DC A 5 B Thermistor 1 to 5V DC 6 + 5 6 4 SET2 4 Resistance bulb 5 3 Alarm output 2 7 8 SET1 9 2 10 1 Power supply 24V DC / 24V AC 50/60Hz Alarm output 1 11 Note 1) For 4 to 20mA DC input, attach the accessory 250 Ω resistor between terminals t and y. APPLICABLE SOCKET (Unit:mm) TP411X type (rail mounting) Terminal screw M3.5×8 TP411SBA type (panel mounting) 4.5 Terminal screw M3.5×7 φ27 5 5 11 1 3 6 7 8 9 1 11 2 45 2 7.8 45 3 4 4.5 16.3 6.2 10 7 4 Two φ4.5 9 holes 10 25.6 4 35.4 6 70 8 7 50 31.2 or less 40±0.2 Two φ4.5 mounting holes 3 PCP SCOPE OF DELIVERY Indicator main frame, fixture set, instruction manual (as specified in code), soket (as specified in code), shunt resistor (250Ω) (for current input), panel face packing (for front waterproof structure) Caution on Safety *Before using this product, be sure to read its instruction manual in advance. Head Office Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome, Shinagawa-ku, Tokyo 141-0032, Japan http://www.fesys.co.jp/eng Instrumentation Div. International Sales Dept. No.1, Fuji-machi, Hino-city, Tokyo, 191-8502 Japan Phone: 81-42-585-6201, 6202 Fax: 81-42-585-6187 http://www.fic-net.jp/eng Information in this catalog is subject to change without notice. Printed in Japan