FUJI YA981S6R_10

http://www.fujisemi.com
YA981S6R
FUJI Diode
Low-Loss Fast Recovery Diode
Maximum Rating and Characteristics
Maximum ratings (at Ta=25˚C unless otherwise specified.)
Item
Symbols
Conditions
Ratings
Units
VRRM
-
600
V
Average forward current
IFAV
50Hz Square wave duty =1/2
Tc = 99˚C
8
A
Non-repetitive forward surge current
IFSM
Sine wave, 10ms 1shot
Repetitive peak reverse voltage
Operating junction temperature
Storage temperature
Electrical characteristics
Item
Forward voltage
40
A
Tj
-
150
˚C
Tstg
-
-40 to +150
˚C
Conditions
Maximum
Units
3.0
V
(at Ta=25˚C unless otherwise specified.)
Symbols
VF
IF =8 A
Reverse current
IR
VR =VRRM
Reverse recovery time
trr
IF =0.1A, IR =0.2A, Irec =0.05A
Thermal resistance
Rth(j-c)
Junction to case
25
µA
0.026
µS
2.5
˚C/W
Mechanical characteristics
Item
Mounting torque
Approximate mass
1
Conditions
Maximum
Units
Recommended torque
0.3 to 0.5
N•m
-
2.0
g
YA981S6R
FUJI Diode
http://www.fujisemi.com
Outline Drawings [mm]
2
YA981S6R
FUJI Diode
http://www.fujisemi.com
Forward Characteristic (typ.)
Reverse Characteristic (typ.)
102
Tj=150°C
101
Tj=125°C
10
IR Reverse Current (µA)
IF Forward Current (A)
Tj=100°C
Tj=150°C
Tj=125°C
Tj=100°C
Tj=25°C
1
10
0
10-1
Tj=25°C
10-2
10-3
0.1
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
2.4
2.6
0
2.8
100
200
300
400
500
600
700
VR Reverse Voltage (V)
VF Forward Voltage (V)
Forward Power Dissipation (max.)
Reverse Power Dissipation (max.)
30
0.035
0.030
I0
25
DC
360°
360°
VR
λ
(W)
α
(W)
Reverse Power Dissipation
Forward Power Dissipation
0.025
20
Square wave λ=60°
Square wave λ=120°
15
Sine wave λ=180°
Square wave λ=180°
DC
PR
WF
10
0.020
α=180°
0.015
0.010
5
0.005
Per 1element
0
0
2
4
6
IF(AV) Average Forward Current
0.000
8
0
(A)
100
200
VR
3
300
400
Reverse Voltage
500
(V)
600
700
YA981S6R
FUJI Diode
http://www.fujisemi.com
Current Derating (IF(AV)-Tc) (max.)
Junction Capacitance Characteristic (typ.)
160
1000
150
140
130
120
110
DC
100
Square wave λ=180°
Sine wave λ=180°
Square wave λ=120°
Cj
Tc
Case Temperature
(°C)
Junction Capacitance (pF)
100
10
90
Square wave λ=60°
80
70
0
2
4
6
8
IF(AV) Average Forward Current
10
12
1
(A)
1
λ :Conduction angle of forward current for each rectifier element
IF(AV):Forward current of center-tap full wave connection
Surge Capability (max.)
100
IFSM
Peak Half - Wave Current
(A)
1000
10
1
1
10
100
Number of Cycles at 50Hz
4
10
100
VR
Reverse Voltage (V)
1000
YA981S6R
FUJI Diode
http://www.fujisemi.com
Transient Thermal Impedance (max.)
2
Transient Thermal Impedance
(°C/W)
10
1
10
Rth j-c:2.5℃/W
0
10
-1
10
-3
10
-2
10
-1
0
10
10
t
Time
5
(sec)
1
10
2
10
YA981S6R
FUJI Diode
http://www.fujisemi.com
WARNING
1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010.
The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this
Catalog, be sure to obtain the latest specifications.
2. A
ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either
express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd.
is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or
warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which
may arise from the use of the applications described herein.
3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor
products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take
adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products
become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction.
4. T
he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has
normal reliability requirements.
• Computers
• OA equipment
• Communications equipment (terminal devices)
• Measurement equipment
• Machine tools
• Audiovisual equipment
• Electrical home appliances
• Personal equipment
• Industrial robots etc.
5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed
below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for
such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's
product incorporated in the equipment becomes faulty.
• Transportation equipment (mounted on cars and ships)
• Trunk communications equipment
• Traffic-signal control equipment
• Gas leakage detectors with an auto-shut-off feature
• Emergency equipment for responding to disasters and anti-burglary devices • Safety devices
• Medical equipment
6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic
equipment (without limitation).
• Space equipment
• Aeronautic equipment
• Nuclear control equipment
• Submarine repeater equipment
7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved.
No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd.
8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before
using the product.
Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in
accordance with instructions set forth herein.
6