http://www.fujisemi.com YG906C3R FUJI Diode Low-Loss Fast Recovery Diode Maximum Rating and Characteristics Maximum ratings (at Ta=25˚C unless otherwise specified.) Item Symbols Repetitive peak reverse voltage VRRM Isolating voltage Viso Average output current - Operating junction temperature Storage temperature IFSM Ratings Units 300 V 1500 V 50Hz Square wave duty =1/2 Tc = 109˚C 20* A Sine wave, 10ms 1shot 80 A Terminals-to-case, AC.1min Io Non-repetitive forward surge current** Conditions Tj - 150 ˚C Tstg - -40 to +150 ˚C Conditions Maximum Units Note* Out put current of center tap full wave connection. Note**Rating per element Electrical characteristics Item (at Ta=25˚C unless otherwise specified.) Symbols Forward voltage*** VF IF =10 A 1.2 V Reverse current*** IR VR =VRRM 200 µA Reverse recovery time*** Thermal resistance trr Rth(j-c) IF =0.1A, IR =0.2A, Irec =0.05A Junction to case 0.035 µS 1.5 ˚C/W Note*** Rating per element Mechanical characteristics Item Mounting torque Approximate mass 1 Conditions Maximum Units Recommended torque 0.3 to 0.5 N•m - 1.7 g YG906C3R FUJI Diode http://www.fujisemi.com Outline Drawings [mm] 2 YG906C3R FUJI Diode http://www.fujisemi.com Reverse Characteristic (typ.) Forward Characteristic (typ.) 100 101 Tj=150°C Tj=125°C 100 Tj=100°C （mＡ） Reverse Current Tj=150°C Tj=125°C 1 Tj=100°C Tj=25°C 10-1 ＩR IF Forward Current (A) 10 10-2 0.1 Tj=25°C 10-3 0.01 0.0 0 0.2 0.4 0.6 0.8 1.0 1.2 50 100 VR VF 250 300 Reverse Voltage (V) Reverse Power Dissipation (max.) 6 14 360° 12 360° I0 α (W) Reverse Power Dissipation 10 Square wave λ=60° Square wave λ=120° 8 Sine wave λ=180° Square wave λ=180° WF PR 6 DC VR 5 λ (W) 200 Forward Voltage (V) Forward Power Dissipation (max.) Forward Power Dissipation 150 1.4 4 α＝180° 3 2 DC 4 1 2 Per 1element 0 0 0 1 2 3 IO 4 5 6 7 Average Output Current 8 9 0 10 (A) 3 25 50 75 100 125 150 175 200 VR Reverse Voltage 225 (V) 250 275 300 YG906C3R FUJI Diode http://www.fujisemi.com Current Derating (Io-Tc) (max.) Junction Capacitance Characteristic (typ.) 100 160 150 140 DC Junction Capacitance (pF) (°C) 130 Sine wave λ=180° 110 Square wave λ=180° 100 Square wave λ=60° 90 10 Cj Square wave λ=120 TC Case Temperature 120 80 70 60 0 5 10 IO Average Output Current 15 1 20 1 (A) λ :Conduction angle of forward current for each rectifier element Io:Output current of center-tap full wave connection Surge Capability (max.) 100 IFSM Peak Half - Wave Current (A) 1000 10 1 10 10 VR 100 Number of Cycles at 50Hz 4 Reverse Voltage (V) 100 YG906C3R FUJI Diode http://www.fujisemi.com Transient Thermal Impedance (max.) 10 1 Transient Thermal Impedance (°C/W) Rth j-c: 1.5 ℃/W 100 10-1 10-2 10-3 10-2 10-1 100 t Time (s) 5 101 102 YG906C3R FUJI Diode http://www.fujisemi.com WARNING 1. This Catalog contains the product specifications, characteristics, data, materials, and structures as of March 2010. The contents are subject to change without notice for specification changes or other reasons. When using a product listed in this Catalog, be sure to obtain the latest specifications. 2. A ll applications described in this Catalog exemplify the use of Fuji's products for your reference only. No right or license, either express or implied, under any patent, copyright, trade secret or other intellectual property right owned by Fuji Electric Systems Co., Ltd. is (or shall be deemed) granted. Fuji Electric Systems Co., Ltd. makes no representation or warranty, whether express or implied, relating to the infringement or alleged infringement of other's intellectual property rights which may arise from the use of the applications described herein. 3. A lthough Fuji Electric Systems Co., Ltd. is enhancing product quality and reliability, a small percentage of semiconductor products may become faulty. When using Fuji Electric semiconductor products in your equipment, you are requested to take adequate safety measures to prevent the equipment from causing a physical injury, fire, or other problem if any of the products become faulty. It is recommended to make your design fail-safe, flame retardant, and free of malfunction. 4. T he products introduced in this Catalog are intended for use in the following electronic and electrical equipment which has normal reliability requirements. • Computers • OA equipment • Communications equipment (terminal devices) • Measurement equipment • Machine tools • Audiovisual equipment • Electrical home appliances • Personal equipment • Industrial robots etc. 5. If you need to use a product in this Catalog for equipment requiring higher reliability than normal, such as for the equipment listed below, it is imperative to contact Fuji Electric Systems Co., Ltd. to obtain prior approval. When using these products for such equipment, take adequate measures such as a backup system to prevent the equipment from malfunctioning even if a Fuji's product incorporated in the equipment becomes faulty. • Transportation equipment (mounted on cars and ships) • Trunk communications equipment • Traffic-signal control equipment • Gas leakage detectors with an auto-shut-off feature • Emergency equipment for responding to disasters and anti-burglary devices • Safety devices • Medical equipment 6. Do not use products in this Catalog for the equipment requiring strict reliability such as the following and equivalents to strategic equipment (without limitation). • Space equipment • Aeronautic equipment • Nuclear control equipment • Submarine repeater equipment 7. Copyright ©1996-2008 by Fuji Electric Systems Co., Ltd. All rights reserved. No part of this Catalog may be reproduced in any form or by any means without the express permission of Fuji Electric Systems Co., Ltd. 8. If you have any question about any portion in this Catalog, ask Fuji Electric Systems Co., Ltd. or its sales agents before using the product. Neither Fuji Electric Systems Co., Ltd. nor its agents shall be liable for any injury caused by any use of the products not in accordance with instructions set forth herein. 6