1G1 THRU 1G7 MINIATURE GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1000 Volts Forward Current - 1.0 Ampere Features Plastic package has Underwriters Laboratory Flammability Classification 94V-0 utilizing Flame retardant epoxy molding compound Glass passivated junction version of 1G1 thru 1G7 in R-1 package 1.0 ampere operation at TA=75 with no thermal runaway Mechanical Data DIM ENSIONS Case: Molded plastic, R-1 Terminals: Axial leads, solderable per MIL-STD-202, method 208 Polarity: Color band denotes cathode Mounting Position: Any Weight: 0.007 ounce, 0.205 gram DIM inches mm Min. Max. Note Min. Max. A 0.114 0.138 2.9 3.5 B 0.095 0.099 2.42 2.51 C 0.020 0.024 0.5 0.6 D 1.000 - 25.40 - 1G3 1G4 1G5 1G6 1G7 Units Maximum Ratings and Electrical Characteristics Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. Symbols 1G1 1G2 Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75 I(AV) 1.0 Amp Peak forward surge current, IFM (surge): 8.3mS single half sine-wave superimposed on rated load (MIL-STD-750D 4066 method) IFSM 30.0 Amps Maximum forward voltage at 1.0A VF 1.1 Volts IR 5.0 100.0 A CJ 15.0 F 50.0 /W Maximum DC reverse current at rated DC blocking voltage TA=25 TA=100 Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating and storage temperature range R JA TJ, TSTG -55 to +150 Notes: (1) Measured at 1.0MHz and applied reverse voltage of 4.0 VDC (2) Thermal resistance junction to ambient 1 RATINGS AND CHARACTERISTIC CURVES 2