1N5620GP SINTERED GLASS JUNCTION PLASTIC RECTIFIER 800V VOLTAGE VOLTAGE：800V 0A CURRENT: 1. 1.0A FEATURE DO-15\DO-204AC High temperature metallurgically bonded construction Sintered glass cavity free junction Low reverse current Capability of meeting environmental standard of MIL-S-19500 High temperature soldering guaranteed 350°C /10sec/0.375”lead length at 5 lbs tension MECHANICAL DATA Terminal: Plated axial leads solderable per MIL-STD 202E, method 208C Case: Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity: color band denotes cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL 20GP 1N56 1N5620GP units Maximum Recurrent Peak Reverse Voltage VRRM 800 V Maximum RMS Voltage VRMS 560 V Maximum DC blocking Voltage VDC 800 V IR=50µA VBR 880 V Maximum Average Forward Rectified Current 3/8”lead length at Ta=50℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at Forward Current 3.0A and 25℃ Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =100℃ IFAV 1.0 A IFSM 50 A VF 1.3 V IR 1.0 25.0 µA Maximum Reverse Breakdown Voltage Maximum Reverse Recovery Time (Note 1) Trr 2.0 µS Typical Junction Capacitance (Note 2) Cj 50.0 pF Typical Thermal Resistance (Note 3) Rth(ja) 35.0 ℃ /W Tstg, Tj -65 to +175 ℃ Storage and Operating Junction Temperature Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 12.0Vdc 3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES 1N5620GP Rev.A1 www.gulfsemi.com