SB22 THRU SB26 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE:20 TO 60V CURRENT: 2.0A SMB/DO--214AA FEATURE Plastic package has Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low profile package Built-in strain relief Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage high frequency inverters, free wheeling, and polarity protection applications Guarding for over voltage protection High temperature soldering guaranteed: 250ºC /10 seconds at terminals MECHANICAL DATA Case: JEDEC DO-214AA molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Weight: 0.003 ounce, 0.093 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25ºC, unless otherwise stated, for capacitive load, derate current by 20%) SYMBOL Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8”lead length at TL =105ºC Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance Operating junction temperature range Storage Temperature range Ta =25ºC Ta =100ºC (Note 2) Vrrm Vrms Vdc SB 22 20 14 20 SB 23 30 21 30 SB 24 SB 25 SB 26 units 40 28 40 50 35 50 60 42 60 V V V If(av) 2.0 A Ifsm 50.0 A Vf Ir Rth(ja) TJ Tstg 0.5 0.7 0.5 20.0 75.0 -55 to +125 -55 to +150 10.0 -55 to +150 V mA ºC /W ºC ºC NOTE: (1) Pulse test: 300µs pulse width, 1% duty cycle (2) P.C.B. mounted with 0.2 x 0.2inches(5.0 x 5.0mm) copper pad areas Rev.A5 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SB22 THRU SB26 1 1 Rev.A5 www.gulfsemi.com