SB8100FCT SCHOTTKY BARRIER RECTIFIER VOLTAGE: 100V CURRENT: 8.0A FEATURE ITO-220AB High current capability, Low forward voltage drop Low power loss, high efficiency High surge capability High temperature soldering guaranteed 250°C /10sec/0.375" lead length at 5 lbs tension MECHANICAL DATA Terminal: JEDEC ITO-220AB molded plastic body over passivated chip Case: Plated Insert leads, solderable per MIL-STD-750, Method 2026 Polarity: Common Cathode Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL SB8100FCT units Maximum Recurrent Peak Reverse Voltage Vrrm 100 V Maximum RMS Voltage Vrms 70 V Maximum DC blocking Voltage Vdc 100 V Maximum Average Forward Rectified Current If(av) 8 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Ifsm 150 A Vf 0.76 V Ir 50 4.5 μA mA Rth(jc) 4.2 °C/W Tj Tstg -65 to +175 °C Maximum Forward Voltage at 4A Maximum DC Reverse Current at rated DC blocking voltage Typical Thermal Resistance Ta =25°C Ta =110°C (Note 1) Operating Junction and Storage Temperature Ramge Note: 1.Thermal Resistance from Junction to Case Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SB8100FCT Rev.A1 www.gulfsemi.com