1D-E SR SR1 SINTERED GLASS JUNCTION SURFACE MOUNTED RECTIFIER 200V VOLTAGE VOLTAGE：200V A CURRENT CURRENT： 1.0 1.0A FEATURE /DO-214BA GF1 GF1/DO-214BA Ideal for surface mount automotive applications High temperature metallurgic ally bonded construction Capability of meeting environmental standard of MIL-S-19500 Fast switching for high efficiency High temperature soldering guaranteed 450℃/5sec at terminal Complete device submersible temperature of 265℃ for 10 seconds in solder bath Halogen Free MECHANICAL DATA Terminal: Solder plated, solderable per MIL-STD 202, method 208C Case: Molded with UL-94 class V-0 recognized Halogen Free Epoxy over Glass Polarity: color band denotes cathode end Mounting position: any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified current TL =120℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load (JEDEC method) Maximum Forward Voltage at 1.0A Maximum full load reverse current full cycle average Ta = 55℃ Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Maximum Reverse Recovery Time (Note1 ) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Range SYMBOL SR1D-E Units Vrrm Vrms Vdc 200 140 200 V V V If(av) 1.0 A Ifsm 30.0 A Vf 1.3 V Ir(av) 50.0 μA Ir Trr Cj Rth(ja) Rth(jl) Tstg, Tj 5.0 100.0 150 8.5 85.0 28.0 -65 to +175 μA nS pF ℃/ W ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied Vr=4.0V 3. Thermal Resistance from Junction to Ambient and from junction to lead, P.C.B. Mounted on 0.2×0.2″(5.0×5.0mm) copper pad areas Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES SR 1D-E SR1 Rev.A1 www.gulfsemi.com