UGS2J THRU UGS2K SURFACE MOUNT SUPERFAST RECTIFIER VOLTAGE： ：600V to 800V CURRENT： ：2.0A SMB／ ／DO— —214AA FEATURE Ideal for surface mount pick and place application Low profile package Built-in strain relief High surge capability High temperature soldering guaranteed 260℃/10sec/at terminals Glass passivated chip Superfast recovery time for high efficiency MECHANICAL DATA Terminal：Plated axial leads solderable per MIL-STD 202E, method 208C Case：Molded with UL-94 Class V-0 recognized Flame Retardant Epoxy Polarity：color band denotes cathode Mounting position：any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25℃, unless otherwise stated) SYMBOL UGS2J UGS2K units Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Current 3/8″lead length at TL =120℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward current Maximum DC Reverse Current Ta =25℃ at rated DC blocking voltage Ta =125℃ Vrrm Vrms Vdc 600 420 600 800 560 800 V V V Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Typical Thermal Resistance (Note 3) Storage and Operating Junction Temperature Trr Cj Rth(jl) Tstg,Tj If(av) 2.0 A Ifsm 50 A Vf 1.5 Ir 2.5 5.0 200.0 25 25.0 13 -55 to +150 V µA nS pF ℃/W ℃ Note： 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc 3. Thermal Resistance from Junction to terminal mounted on 5×5mm copper pad area Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UGS2J THRU UGS2K Rev.A1 www.gulfsemi.com