HITTITE 575LP4E

HMC575LP4 / 575LP4E
v00.0506
FREQ. MULTIPLIERS - ACTIVE - SMT
7
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 6 - 9 GHz OUTPUT
Typical Applications
Features
The HMC575LP4 / HMC575LP4E is suitable for:
High Output Power: +17 dBm
• Wireless Local Loop
Low Input Power Drive: -2 to +6 dBm
• Point-to-Point & VSAT Radios
Fo, 3Fo Isolation: 15 dBc
• Test Instrumentation
100 KHz SSB Phase Noise: -140 dBc/Hz
• Military & Space
Single Supply: +5V@ 90 mA
RoHS Compliant 4x4 mm SMT Package
Functional Diagram
General Description
The HMC575LP4 & HMC575LP4E are x2 active
broadband frequency multipliers utilizing GaAs
PHEMT technology in a leadless RoHS compliant
SMT package. When driven by a 3 dBm signal, the
multiplier provides +17 dBm typical output power from
6 to 9 GHz. The Fo and 3Fo isolations are 15 dBc with
respect to output signal level. This frequency multiplier
features DC blocked I/O’s, and is ideal for use in LO
multiplier chains for Pt to Pt & VSAT Radios yielding
reduced parts count vs. traditional approaches. The low
additive SSB Phase Noise of -140 dBc/Hz at 100 kHz
offset helps maintain good system noise performance.
The HMC575LP4 & HMC575LP4E are compatible with
surface mount manufacturing techniques.
Electrical Specifi cations, TA = +25° C, Vdd1, Vdd2 = +5V, 3 dBm Drive Level
Parameter
Min.
Frequency Range, Input
Frequency Range, Output
Output Power
14
Max.
Units
GHz
6-9
GHz
17
dBm
Fo Isolation (with respect to output level)
15
dBc
3Fo Isolation (with respect to output level)
15
dBc
Input Return Loss
15
dB
Output Return Loss
SSB Phase Noise (100 kHz Offset)
Supply Current (Idd1 & Idd2)
7 - 94
Typ.
3 - 4.5
12
dB
-140
dBc/Hz
90
mA
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC575LP4 / 575LP4E
v00.0506
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 6 - 9 GHz OUTPUT
Output Power vs.
Temperature @ 3 dBm Drive Level
Output Power vs. Drive Level
7
25
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
20
20
15
+25C
+85C
-40C
10
5
15
10
-2dBm
0dBm
2dBm
4dBm
6dBm
5
0
-5
0
5.5
-10
6
6.5
7
7.5
8
8.5
9
6
9.5
6.5
7
OUTPUT FREQUENCY (GHz)
7.5
8
8.5
9
8.5
9
FREQUENCY (GHz)
Output Power vs.
Supply Voltage @ 3 dBm Drive Level
Isolation @ 3 dBm Drive Level
25
25
OUTPUT POWER (dBm)
15
Vdd=4.5V
Vdd=5.0V
Vdd=5.5V
10
5
15
10
Fo
2Fo
3Fo
5
0
-5
-10
0
-15
6
6.5
7
7.5
8
8.5
9
6
6.5
OUTPUT FREQUENCY (GHz)
7
7.5
8
OUTPUT FREQUENCY (GHz)
Output Power vs. Input Power
25
20
OUTPUT POWER (dBm)
OUTPUT POWER (dBm)
20
20
FREQ. MULTIPLIERS - ACTIVE - SMT
25
15
10
5
0
6 GHz
7.5GHz
9 GHz
-5
-10
-15
-10
-8
-6
-4
-2
0
2
4
6
8
10
INPUT POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 95
HMC575LP4 / 575LP4E
v00.0506
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 6 - 9 GHz OUTPUT
Output Return Loss vs. Temperature
Input Return Loss vs. Temperature
7 - 96
0
0
OUTPUT RETURN LOSS (dB)
-2
INPUT RETURN LOSS (dB)
FREQ. MULTIPLIERS - ACTIVE - SMT
7
-5
+25C
+85C
-40C
-10
-15
-20
-4
-6
+25C
+85C
-40C
-8
-10
-12
-14
-16
-18
-25
-20
3
3.25
3.5
3.75
4
4.25
4.5
6
6.5
FREQUENCY (GHz)
Absolute Maximum Ratings
7
7.5
8
8.5
9
FREQUENCY (GHz)
Typical Supply Current vs. Vdd
RF Input (Vdd = +5V)
+13 dBm
Vdd (Vdc)
Supply Voltage (Vdd)
+6.0 Vdc
4.5
Idd (mA)
89
Channel Temperature
150 °C
5.0
90
Continuous Pdiss (T= 85 °C)
(derate 7.9 mW/°C above 85 °C)
512 mW
5.5
91
Thermal Resistance
(channel to ground paddle)
127 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
Note:
Multiplier will operate over full voltage range shown above.
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC575LP4 / 575LP4E
v00.0506
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 6 - 9 GHz OUTPUT
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED
LAND PATTERN.
FREQ. MULTIPLIERS - ACTIVE - SMT
7
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC575LP4
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC575LP4E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H575
XXXX
[2]
H575
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 97
HMC575LP4 / 575LP4E
v00.0506
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 6 - 9 GHz OUTPUT
Pin Description
FREQ. MULTIPLIERS - ACTIVE - SMT
7
7 - 98
Pin Number
Function
Description
1, 5 - 14, 18,
19, 21, 23, 24
N/C
These pins are internally not connected; however,
this product was specified with these pins connected
to RF/ DC ground.
2, 4, 15, 17
GND
Package bottom must also be connected
to RF/DC ground.
3
RFIN
Pin is AC coupled and matched
to 50 Ohms from 3 - 4.5 GHz.
16
RFOUT
Pin is AC coupled and matched
to 50 Ohms from 6 - 9 GHz.
20, 22
Vdd2, Vdd1
Supply voltage 5V ± 0.5V. External bypass capacitors
of 100 pF and 2.2 μF are required.
Interface Schematic
Application Circuit
Component
Value
C1, C2
100 pF
C3, C4
2.2 μF
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC575LP4 / 575LP4E
v00.0506
SMT GaAs MMIC x2 ACTIVE FREQUENCY
MULTIPLIER, 6 - 9 GHz OUTPUT
Evaluation PCB
FREQ. MULTIPLIERS - ACTIVE - SMT
7
List of Materials for Evaluation PCB 112405 [1]
Item
Description
J1, J2
PCB Mount SRI SMA Connector
J3 - J5
DC Pin
C1, C2
100 pF Capacitor, 0402 Pkg.
C3, C4
2.2 μF Tantalum Capacitor
U1
HMC575LP4 / HMC575LP4E
x2 Active Multiplier
PCB [2]
115270 Eval Board
The circuit board used in the final application should
be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed
paddle should be connected directly to the ground
plane similar to that shown. The evaluation circuit
board shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
7 - 99