HMC306MS10 / 306MS10E v06.0206 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.7 - 3.8 GHz ATTENUATORS - SMT 5 Typical Applications Features The HMC306MS10 / HMC306MS10E is ideal for: RoHS-Compliant Product • Cellular; UMTS/3G Infrastructure 0.5 dB LSB Steps to 15.5 dB • ISM, MMDS, WLAN, WiMAX Single Positive Control Per Bit • Microwave Radio & VSAT ± 0.2 dB Typical Bit Error • Test Equipment and Sensors Miniature 15 mm2 Package: MSOP10 Included in the HMC-DK004 Designer’s Kit Functional Diagram General Description The HMC306MS10 & HMC306MS10E are general purpose broadband 5-bit positive control GaAs IC digital attenuators in 10 lead MSOP surface mount plastic packages. Covering 0.7 to 3.8 GHz, the insertion loss is typically less than 1.5 to 2.3 dB. These attenuators’ bit values are 0.5 (LSB), 1, 2, 4 and 8 dB for a total attenuation of 15.5 dB. Attenuation accuracy is excellent at ± 0.2 dB typical with an IIP3 of up to +52 dBm. Five bit control voltage inputs, toggled between 0 and +3 to +5V, are used to select each attenuation state. A single Vdd bias of +3 to +5V applied through an external 5K Ohm resistor is required. Electrical Specifi cations, TA = +25° C, Vdd= +3V to +5V & VCTL= 0/Vdd (Unless Otherwise Stated) Parameter Frequency (GHz) Min. 0.7 - 1.4 1.4 - 2.3 2.3 - 2.7 2.7 - 3.8 Insertion Loss Attenuation Range Typical Max. Units 1.3 1.5 1.8 2.3 1.6 2.0 2.5 2.7 dB dB dB dB 15.5 dB 21 18 16 13 dB dB dB dB Return Loss (RF1 & RF2, All Atten. States) 0.7 - 1.4 1.4 - 2.3 2.3 - 2.7 2.7 - 3.8 Attenuation Accuracy: (Referenced to Insertion Loss) All Attenuation States 0.5 - 7.5 dB States 8.0 - 15.5 dB States All Attenuation States 0.7 - 1.4 1.4 - 2.3 1.4 - 2.3 2.3 - 3.8 ± (0.30 + 5% of Atten. Setting) Max. ± (0.25 + 3% of Atten. Setting) Max. ± (0.15 + 3% of Atten. Setting) Max. ± (0.30 + 3% of Atten. Setting) Max. dB dB dB dB 15 14 13 10 Input Power for 0.1 dB Compression Vdd = 5V Vdd = 3V 0.7 - 3.8 25 23 dBm dBm Input Third Order Intercept Point (Two-tone Input Power = 0 dBm Each Tone) Vdd = 5V Vdd = 3V 0.7 - 3.8 52 48 dBm dBm 560 600 ns ns Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 5 - 60 0.7 - 3.8 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC306MS10 / 306MS10E v06.0206 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.7 - 3.8 GHz 5 Return Loss RF1, RF2 (Only Major States are Shown) Insertion Loss -5 -1 RETURN LOSS (dB) INSERTION LOSS (dB) -0.5 -1.5 -2 -2.5 -3 +25 C -40 C +85 C -3.5 -4 0.5 1 1.5 2 2.5 0.5 dB 1 dB 2 dB 4 dB 8 dB 14 dB -10 -15 -20 -25 3 3.5 -30 0.5 4 1 1.5 FREQUENCY (GHz) 2 2.5 3 3.5 4 FREQUENCY (GHz) Normalized Attenuation (Only Major States are Shown) Absolute Bit Error vs. Attenuation State 1.5 -3 1.2 BIT ERROR (dB) NORMALIZED ATTENUATION (dB) 0 -6 -9 0.5 dB 1 dB 2 dB 4 dB 8 dB 15.5 dB -12 0.9 GHz 1.9 GHz 2.4 GHz 3.5 GHz 0.9 0.6 0.3 -15 -18 0.5 1 1.5 2 2.5 3 3.5 0 0.5 4 2 3.5 FREQUENCY (GHz) 5 6.5 8 9.5 11 12.5 Relative Phase vs. Frequency (Only Major States are Shown) (Only Major States are Shown) RELATIVE PHASE (deg.) 1.2 BIT ERROR (dB) 15.5 60 1.5 4 dB 8 dB 15.5 dB 0.5, 1, 2 dB 0.6 0.3 0 0.5 14 ATTENUATION STATE (dB) Absolute Bit Error vs. Frequency 0.9 ATTENUATORS - SMT 0 0 1 1.5 2 2.5 FREQUENCY (GHz) 3 3.5 4 2 dB 4 dB 8 dB 15.5 dB 40 20 0 -20 -40 0.5 0.5, 1 dB 1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 61 HMC306MS10 / 306MS10E v06.0206 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.7 - 3.8 GHz ATTENUATORS - SMT 5 Truth Table Control & Bias Voltages Control Voltage Input V1 8 dB V2 4 dB V3 2 dB V4 1 dB V5 0.5 dB Attenuation State RF1 - RF2 High High High High High Reference I.L. High High High High Low 0.5 dB High High High Low High 1 dB High High Low High High 2 dB State Bias Condition Low 0 to +0.2V @ 20 μA Max. High Vdd ± 0.2V @ 20 μA Max. Note: Vdd = +3V to 5V ± 0.2V 0.00.20.2 High Low High High High 4 dB Low High High High High 8 dB Low Low Low Low Low 15.5 dB Max. Atten. Any combination of the above states will provide an attenuation approximately equal to the sum of the bits selected. Application Circuit Note: DC Blocking Capacitors C1 & C2 are required on RF1 & RF2. Choose C1 = C2 = 100 ~ 300 pF to allow lowest customer specifi c frequency to pass with minimal loss. R1= 5K Ohm is required to supply voltage to the circuit through either Pin 6 or Pin 10. 5 - 62 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC306MS10 / 306MS10E v06.0206 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.7 - 3.8 GHz 5 Absolute Maximum Ratings Vdd + 0.5 Vdc Bias Voltage (Vdd) +8.0 Vdc Storage Temperature -65 to +150 °C Operating Temperature -40 to +85 °C RF Input Power (0.7 - 3.8 GHz) +28 dBm ESD Sensitivity (HBM) Class 1A ATTENUATORS - SMT Control Voltage (V1 - V5) ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC306MS10 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC306MS10E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [1] H306 XXXX [2] H306 XXXX [3] [1] Max peak reflow temperature of 235 °C [2] Max peak reflow temperature of 260 °C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 63 HMC306MS10 / 306MS10E v06.0206 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.7 - 3.8 GHz Evaluation Circuit Board ATTENUATORS - SMT 5 * R2 - R6= 100 Ohm. These resistors are optional and may be used to enhance decoupling of the RF path from the control inputs. List of Materials for Evaluation PCB 103393 [1] Item Description J1 - J2 PCB Mount SMA Connector J3 - J8 DC Pin R1 5k Ohm Resistor, 0402 Pkg. R2 - R6 100 Ohm Resistor, 0402 Pkg. C1 - C2 0402 Chip Capacitor, Select Value for Lowerst Frequency U1 HMC306MS10 / HMC306MS10E Digital Attenuators PCB [2] 103391 Evaluation PCB 1.5” x 1.5” The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 5 - 64 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC306MS10 / 306MS10E v06.0206 0.5 dB LSB GaAs MMIC 5-BIT DIGITAL ATTENUATOR, 0.7 - 3.8 GHz 5 ATTENUATORS - SMT Notes: For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 5 - 65