Passive High-voltage Probes P5100A • TPP0850 • P5122 • P5150 • P6015A Datasheet P5122 For TPS2000 and THS3000 Series Oscilloscopes DC to 200 MHz 1000 VRMS CAT II when DC-coupled*1 Floatable up to 600 VRMS CAT II 100X IEC61010-031 P5150 For TPS2000 and THS3000 Series Oscilloscopes DC to 500 MHz P5100A 2500 VPeak, 1000 VRMS CAT II Features & Benefits Floatable up to 600 VRMS CAT II or 300 VRMS CAT III P5100A DC to 500 MHz Preferred Probe for Ripple Measurements 50X 2500 VPeak, 1000 VRMS CAT II 10 to 25 pF Compensation Range 100X with Readout Coding UL61010B-2-031, EN61010-2-031, IEC61010-2-031, CSA61010.2.031 UL3111-1, EN61010-1, IEC61010-2-031, CSA1010.1, CSA1010.2.031 7 to 30 pF Compensation Range TPP0850 DC to 800 MHz 2500 VPeak, 1000 VRMS CAT II 50X with Readout Coding Designed for use with the MSO/DPO5000 and MSO/DPO4000B Series Oscilloscopes P6015A High Voltage – 20 kV DC / 40 kV Peak (100 ms Pulse Width) High Bandwidth – DC to 75 MHz Silicone Dielectric Optional 1000X Readout Coding Wide Compensation Range (7 to 49 pF) Heavy-duty Versatile Ground Lead and Alligator Clip Datasheet Applications Power Supply Design Design Motor Drive Electronic Ballast Power Semiconductors Switch Mode Control UPS Systems Power Converters *1 The P5122 probe should not be used on the TPS2000 Series oscilloscopes for AC-coupled measurements on signals with greater than 300 V DC offset. The P5150 is the recommended probe for measuring ripple on high-voltage DC supplies. P5100A High-voltage Probe TPP0850 The P5100A is a low input capacitance high-voltage probe (2.5 kV) designed for higher-frequency applications. The probe can be compensated to match plug-ins and oscilloscopes with nominal input capacitances of 7-30 pF. A variety of screw-on accessories provide easy connection to the device-under-test. channels. The P5150 or P5122, coupled with the TPS2000 and THS3000 Series digital storage oscilloscopes, deliver both the isolation for the measurement from earth ground and full isolation between the channels. The P5150 is the recommended probe for measuring ripple on high-voltage DC supplies. The P5122 probe should not be used on the TPS2000 Series oscilloscopes for AC-coupled measurements on signals with greater than 300 V DC offset. TPP0850 High-voltage Probe The TPP0850 offers the industry’s highest bandwidth probe (800 MHz) for high-voltage signals (up to 2500 Vp-p). This is ideal for testing power semiconductors and switch-mode power supplies, which continue to increase in switching speed to minimize power loss, creating a need for faster rise time, higher bandwidth, and higher voltage probes. The TPP0850 meets this need and can be used with switching transistor circuits operating at 1200 VRMS, above the voltage operating range of standard general-purpose probes. It will also be able to accommodate emerging power applications that will require even faster rise time capabilities. P6015A High-voltage Probe For heavy-duty high-performance measurements of voltages over 2.5 kV, the P6015A is the industry standard. You can measure DC voltages up to 20 kVRMS and pulses up to 40 kV (peak, 100 ms duration). The 75 MHz bandwidth enables you to capture fast, high-voltage signals. P5150 and P5122 IsolatedChannel™ Applications The P6015A uses an environmentally safe silicone compound for a dielectric and never needs refilling. Other features include: A 7-49 pF compensation range, small compensation box that fits on adjacent amplifier inputs, and a readout option for use with most Tektronix digital scopes. With the readout option, displayed voltage amplitude values will be the actual signal value rather than understated by a factor of 1,000. In many applications, it is important to be able to isolate the measurement from earth ground and also to isolate the common voltage between Note: Using the readout version with other than Tektronix digital scopes may result in an erroneous readout display. 2 www.tektronix.com Passive High-voltage Probes — P5100A • TPP0850 • P5122 • P5150 • P6015A Characteristics P5100A/TPP0850/P5122/P5150/P6015A Probe Nominal Length Attenuation Bandwidth Rise Time (Typical) Loading P5100A 2m 100X 500 MHz <700 ps 40 MΩ / 2.5 pF TPP0850 1.3 m 50X 800 MHz <525 ps 40 MΩ / 1.8 pF P5122 P5150 1.2 m 2m 100X 50X 200 MHz 500 MHz 2.2 ns <700 ps 100 MΩ / 4.0 pF 40 MΩ / 3.8 pF P6015A P6015A Opt. 1R 3m 3m 1000X 1000X 75 MHz 75 MHz 4.0 ns 4.0 ns 100 MΩ / 3 pF 100 MΩ / 3 pF Ordering Information P5100A/TPP0850 High-voltage Probes. Includes: Large hook tip (013-0384-xx), small hook tip (013-0386-xx), 6 in. ground lead (196-3524-xx), 18 in. ground lead (196-3525-xx), ground spring (214-5298-xx), crocodile clip (344-0461-xx), adjustment tool (003-1433-xx), color bands (016-1886-xx). Recommended Accessories Accessory Description 013-0291-xx 206-0060-xx Probe Tip to BNC Adapter 0.080 in. diameter Spring Tip P5122 100X, High-voltage Probe for TPS2000 and THS3000 Series Oscilloscopes. Includes: Large retractable hook tip, lead with hook tip, lead with crocodile clip, adjustment tool, instruction manual. P5150 50X, High-voltage Probe for TPS2000 and THS3000 Series Oscilloscopes. Includes: Large hook tip (013-0389-xx), small hook tip (013-0388-xx), 6 in. ground lead (196-3526-xx), 18 in. ground lead (196-3527-xx), common spring (214-5299-xx), crocodile clip (344-0461-xx), color bands (016-1886-xx), adjustment tool (003-1433-xx). Max. Input V Max. Float V Comp. Range DC or RMS in pF 2.5 kVPeak N/A 1000 VRMS CAT II 2.5 kVPeak N/A 1000 VRMS CAT II 1000 VRMS CAT II 600 VRMS CAT II 2.5 kVPeak 600 VRMS CAT II, 1000 VRMS CAT II 300 VRMS CAT III 20 kV N/A 20 kV N/A Readout 7 to 30 Yes N/A Yes 10 to 22 10 to 25 No No 7 to 49 7 to 49 No Yes P6015A 1000X, 3-meter High-voltage Probe. Includes: Hook probe tip (206-0463-xx); banana plug tip (134-0016-xx); crocodile clip – plugs onto ground lead (344-0461-xx); ground lead (196-3363-xx); carrying case (016-1147-xx); instruction manual (070-8223-xx). Options (P6015A only) Option Description Opt. 1R 3-meter length with readout Service (P6015A only) Option Description Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. Calibration Service 3 Years Calibration Service 5 Years Calibration Data Report Calibration Data Report 3 Years (with Opt. C3) Calibration Data Report 5 Years (with Opt. C5) Repair Service 3 Years Repair Service 5 Years Standard Warranty Extended to 5 Years (TPP0850) Standard Warranty Extended to 5 Years (P6015A) C3 C5 D1 D3 D5 R3 R5 SILV200 SILV600 Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. Recommended Accessories for P5150 See P5100A/TPP0850 Recommended Accessories. www.tektronix.com 3 Datasheet Contact Tektronix: ASEAN / Australasia (65) 6356 3900 Austria 00800 2255 4835* Balkans, Israel, South Africa and other ISE Countries +41 52 675 3777 Belgium 00800 2255 4835* Brazil +55 (11) 3759 7627 Canada 1 800 833 9200 Central East Europe and the Baltics +41 52 675 3777 Central Europe & Greece +41 52 675 3777 Denmark +45 80 88 1401 Finland +41 52 675 3777 France 00800 2255 4835* Germany 00800 2255 4835* Hong Kong 400 820 5835 India 000 800 650 1835 Italy 00800 2255 4835* Japan 81 (3) 6714 3010 Luxembourg +41 52 675 3777 Mexico, Central/South America & Caribbean 52 (55) 56 04 50 90 Middle East, Asia, and North Africa +41 52 675 3777 The Netherlands 00800 2255 4835* Norway 800 16098 People’s Republic of China 400 820 5835 Poland +41 52 675 3777 Portugal 80 08 12370 Republic of Korea 001 800 8255 2835 Russia & CIS +7 (495) 7484900 South Africa +41 52 675 3777 Spain 00800 2255 4835* Sweden 00800 2255 4835* Switzerland 00800 2255 4835* Taiwan 886 (2) 2722 9622 United Kingdom & Ireland 00800 2255 4835* USA 1 800 833 9200 * European toll-free number. If not accessible, call: +41 52 675 3777 Updated 10 February 2011 For Further Information. Tektronix maintains a comprehensive, constantly expanding collection of application notes, technical briefs and other resources to help engineers working on the cutting edge of technology. Please visit www.tektronix.com Copyright © Tektronix, Inc. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specification and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names referenced are the service marks, trademarks, or registered trademarks of their respective companies. 26 Jul 2012 www.tektronix.com 56W-10262-10