DTA123YE/DTA123YUA/DTA123YCA/DTA123YKA/DTA123YSA DIGITAL TRANSISTOR(PNP) DIGITAL TRANSISTOR (PNP) Features 1) Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). 2) The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. 3) Only the on/off conditions need to be set for operation, making device design easy. PIN CONNENCTIONS AND MARKING DTA123YUA DTC114EUA DTA123YE SOT-323 SOT-523 Addreviated symbol: 52 Addreviated symbol: 52 DTA123YKA SOT-23-3L DTA123YCA SOT-23 Addreviated symbol: 52 Addreviated symbol: 52 DTA123YSA TO-92S １ JinYu semiconductor www.htsemi.com Ｄａｔｅ：２０１１／０５ DTA123YE/DTA123YUA/DTA123YCA/DTA123YKA/DTA123YSA Absolute maximum ratings(Ta=25℃) Limits (DTA123Y□ ) Parameter Symbol Supply voltage VCC -50 V Input voltage VIN -12~5 V IO -100 IC(MAX) -100 Output current E UA KA 150 CA SA Unit mA Power dissipation Pd 200 300 mW Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) Max. -0.3 -3 VI(on) Unit V Conditions VCC=-5V ,IO=-100µA VO=-0.3V ,IO=-20 mA Output voltage VO(on) -0.3 V IO/II=-10mA/-0.5mA Input current II -3.8 mA VI=-5V Output current IO(off) -0.5 µA VCC=-50V ,VI=0 DC current gain GI 33 Input resistance R1 1.54 2.2 2.86 Resistance ratio R2/R1 3.6 4.5 5.5 Transition frequency fT VO=-5V ,IO=-10mA 250 KΩ MHz VCE=-10V ,IE=5mA,f=100MHz Typical Characteristics ２ JinYu semiconductor www.htsemi.com Ｄａｔｅ：２０１１／０５