3.0x2.5mm SURFACE MOUNT LED LAMP Part Number: APB3025YSGC-F01 Yellow Super Bright Green Features Description z 3.0mmx2.5mm SMT LED, 1.1mm thickness. The Yellow source color devices are made with Gallium z Bi -color,low power consumption. Arsenide Phosphide on Gallium Phosphide Yellow Light z Wide viewing angle. Emitting Diode. z Ideal for backlight and indicator. The Super Bright Green source color devices are made with z Package : 2000pcs / reel. Gallium Phosphide Green Light Emitting Diode. z Moisture sensitivity level : level 3. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 1 OF 6 ERP: 1203000776 Selection Guide Part No. Dice Yellow (GaAsP/GaP) APB3025YSGC-F01 Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 5 10 8 15 Water Clear Super Bright Green (GaP) 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Yellow Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 565 nm IF=20mA Yellow Super Bright Green 588 568 nm IF=20mA Spectral Line Half-width Yellow Super Bright Green 35 30 nm IF=20mA C Capacitance Yellow Super Bright Green 20 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Yellow Super Bright Green 2.1 2.2 2.5 2.5 V IF=20mA IR Reverse Current Yellow Super Bright Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Yellow Super Bright Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 140 140 mA Reverse Voltage 5 V Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 2 OF 6 ERP: 1203000776 APB3025YSGC-F01 Yellow SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 3 OF 6 ERP: 1203000776 Super Bright Green SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 4 OF 6 ERP: 1203000776 APB3025YSGC-F01 Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 5 OF 6 ERP: 1203000776 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAE5919 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu APB3025YSGC-F01 DATE: FEB/25/2011 DRAWN: D.M.Su PAGE: 6 OF 6 ERP: 1203000776