3.2X1.6mm SMD CHIP LED LAMP APK3216MGC MEGA GREEN Features Description !3.2mmX1.6mm SMT LED, 1.1mm THICKNESS. The Mega Green source color devices are made !LOW POWER CONSUMPTION. with DH InGaAlP on GaAs substrate Light !WIDE VIEWING ANGLE. Emitting Diode. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE :2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO:DSAD1149 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e APK3216MGC Iv (m c d ) @ 20m A L en s Ty p e MEGA GREEN (InGaAIP) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 50 120 90 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Mega Green λD Dominate Wavelength ∆λ 1/2 Ty p . Max . Un it s Tes t Co n d it io n s 574 nm I F =20mA Mega Green 568 nm I F =20mA Spectral Line Half-width Mega Green 26 nm I F =20mA C Capacitance Mega Green 20 pF V F =0V;f=1MHz VF Forward Voltage Mega Green 2.1 2.5 V I F =20mA IR Reverse Current Mega Green 10 uA V R = 5V Absolute Maximum Ratings at T)=25°°C Par am et er Meg a Gr een Un it s Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO:DSAD1149 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 2 OF 4 Mega Green SPEC NO:DSAD1149 APPROVED:J.Lu APK3216MGC REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 3 OF 4 APK3216MGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO:DSAD1149 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 4 OF 4