SRA2202U PNP Silicon Transistor PIN Connection Descriptions • Switching application OUT • Interface circuit and driver circuit application OUT IN Features COMMON IN • With built-in bias resistors • Simplify circuit design • Reduce a quantity of parts and manufacturing process • High packing densit R1 R2 10KΩ 10KΩ R1 R2 Ordering Information COMMON Type NO. Marking Package Code 2R □ SRA2202U SOT-323 ① ② ①Device Code ②Year&Week Code Absolute Maximum Ratings (Ta=25°C) Characteristic Symbol Rating Unit Output voltage VO -50 V Input voltage VI -30, 10 V Output current IO -100 mA Power dissipation PD 200 mW Junction temperature TJ 150 °C Tstg -55 ∼ 150 °C Storage temperature range Electrical Characteristics Characteristic Output cut-off current (Ta=25°C) Symbol IO(OFF) Test Condition VO=-50V, VI=0 Unit - - -500 nA 50 80 - - DC current gain GI Output voltage VO(ON) IO=-10mA, II=-0.5mA - -0.1 -0.3 V Input voltage (ON) VI(ON) VO=-0.2V, IO=-5mA - -1.8 -2.4 V Input voltage (OFF) VI(OFF) VO=-5V, IO=-0.1mA -1.0 -1.2 - V VO=-10V, IO=-5mA, f=1MHz - 200 - MHz VI=-5V, IO=0 - - -0.88 mA * VO=-5V, IO=-10mA Min. Typ. Max. Transition frequency fT Input current II Input resistor (Input to base) R1 - 7 10 13 KΩ Input resistor (Base to common) R2 - 7 10 13 KΩ * : Characteristic of transistor only KSD-R5D025-000 1 SRA2202U Electrical Characteristic Curves Fig. 2 IO - VI(ON) Fig. 1 Pc - Ta Fig. 4 GI - IO ㎂ Fig. 3 IO - VI(OFF) KSD-R5D025-000 2 SRA2202U Outline Dimension ※Recommend PCB solder land [Unit: mm] KSD-R5D025-000 3 SRA2202U The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-R5D025-000 4