LIGITEK LH9033-TR2

LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
SURFACE MOUNT TAPE AND REEL
Pb
Lead-Free Parts
LH9033/TR2
DATA SHEET
DOC. NO
:
QW0905-LH9033/TR2
REV.
:
A
DATE
:
04 - Mar. - 2008
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LH9033/TR2
Page 1/7
Package Dimensions
Cathode
2.5
0.4±0.1
2.0
0.5±0.1
5.8±0.5
ψ1.9
3.05±0.5
1.4
2.8
0.7
4.3± 0.5
Note : 1.All dimension are in millimeter tolerance is ±0.2mm unless otherwise noted.
2.Specifications are subject to change without notice.
Carrier Type Dimensions
4.0
0.3
6.43
9.3
12±0.3
5.5
Polarity
1.75
2.0
Note : The tolerances unless mentioned is ±0.2mm Unit=mm.
4.0
ψ1.55
3.05
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 2/7
PART NO. LH9033/TR2
Reel Dimensions
16.0± 1.0
ψ178±2.0
14.2±1.0
74.0±1.5
Part No.
Description
Quantity/Reel
LH9033/TR2
12.0mm tape,7"reel
1500 devices
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 3/7
PART NO. LH9033/TR2
Absolute Maximum Ratings at Ta=25 ℃
Absolute Maximum Ratings
Symbol
Parameter
UNIT
H
Forward Current
IF
15
mA
Peak Forward Current
Duty 1/10@10KHz
IFP
60
mA
Power Dissipation
PD
40
mW
Reverse Current @5V
Ir
10
μA
Operating Temperature
Topr
-40 ~ +85
℃
Storage Temperature
Tstg
-40 ~ +100
℃
Typical Electrical & Optical Characteristics (Ta=25 ℃)
PART NO
COLOR
MATERIAL
Emitted
LH9033/TR2
GaP
Red
Forward
Peak
Spectral
voltage
wave
halfwidth
length
△λ nm @20mA(V)
λPnm
@10mA(mcd)
Viewing
angle
2θ 1/2
(deg)
Min. Max. Min. Typ.
Lens
Water Clear
Luminous
intensity
697
90
1.7
Note : 1.The forward voltage data did not including ± 0.1V testing tolerance.
2. The luminous intensity data did not including ±15% testing tolerance.
2.6
4.5
8.0
20
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LH9033/TR2
Page 4/7
Typical Electro-Optical Characteristics Curve
H CHIP
Fig.1 Forward current vs. Forward Voltage
Fig.2 Relative Intensity vs. Forward Current
3.0
2.5
Relative Intensity
Normalize @20mA
Forward Current(mA)
1000
100
10
1.0
2.0
1.5
1.0
0.5
0.1
0.0
1.0
2.0
3.0
4.0
5.0
1.0
10
1.2
Fig.4 Relative Intensity vs. Temperature
Relative Intensity@20mA
Normalize @25℃
Forward Voltage@20mA
Normalize @25℃
Fig.3 Forward Voltage vs. Temperature
1.1
1.0
0.9
0.8
-20
0
20
40
60
80
100
3.0
2.5
2.0
1.5
1.0
0.5
0.0
-40
-20
0
20
40
60
80
100
Ambient Temperature( ℃)
Ambient Temperature( ℃)
Fig.6 Directive Radiation
Fig.5 Relative Intensity vs. Wavelength
Relative Intensity@20mA
1000
Forward Current(mA)
Forward Voltage(V)
-40
100
0°
1.0
-30°
30°
-60°
0.5
0.0
600
700
800
900
Wavelength (nm)
1000
100% 75% 50%
60 °
25%
0
25% 50% 75% 100%
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LH9033/TR2
Page 5/7
Recommended Soldering Conditions
1. Hand Solder
Basic spec is ≦ 280℃ 3 sec one time only.
2. Wave Solder
Soldering heat Max. 260 ℃
245±5℃ within 5 sec
Preheat
120 ~ 150 ℃
120 ~ 180 sec
3. LEAD Reflow Solder
Temp.
(℃)
240
Rising
+5 ℃/sec
Cooling
-5℃/sec
Preheat
150
120
60 ~ 120 sec
Time
5sec
4. PB-Free Reflow Solder
1~5°C/sec
Preheat
180~200 °C
1~5° C/sec
260° C MaX.
10sec.Max
Above 220 °C
60 sec.Max.
120 sec.Max.
Note: 1.Wave solder and reflow soldering should not be made more than one time.
2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
PART NO. LH9033/TR2
Page 6/7
Precautions For Use:
Storage time:
1.The operation of Temperatures and RH are : 5 ℃~35℃,RH<60%.
2.Once the package is opened, the products should be used within a week.
Otherwise, they should be kept in a damp proof box with descanting agent.
Considering the tape life, we suggest our customers to use our products within
a year(from production date).
3.If opened more than one week in an atmosphere 5 ℃ ~ 35℃,RH<60%,
they should be treated at 60 ℃± 5 ℃fo r 15hrs.
Drive Method:
LED is a current operated device, and therefore, requirer some kind of current limiting incorporated into
the driver circuit. This current limiting typically takes the form of a current limiting resistor placed in series
with the LED.
Consider worst case voltage variations than could occur across the current limiting resistor. The forwrd
current should not be allowed to change by more than 40 % of its desired value.
Circuit model A
Circuit model B
LED
LED
(A) Recommended circuit.
(B) The difference of brightness between LED could be found due to the VF-IF characteristics of LED.
Cleaning:
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean the LED.
ESD(Electrostatic Discharge):
Static Electricity or power surge will damage the LED. Use of a conductive wrist band or anti-electrosatic
glove is recommended when handing these LED. All devices, equipment and machinery must be properly
grounded.
LIGITEK ELECTRONICS CO.,LTD.
Property of Ligitek Only
Page 7/7
PART NO. LH9033/TR2
Reliability Test:
Classification
Test Condition
Test Item
Reference
Standard
Operating Life Test
1.Ta=Under Room Temperature As Per Data Sheet
Maximum Rating.
2.If=20mA
3.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-750D: 1026
MIL-STD-883D: 1005
JIS C 7021: B-1
High Temperature
Storage Test
1.Ta=105 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
MIL-STD-883D:1008
JIS C 7021: B-10
Low Temperature
Storage Test
1.Ta=-40 ℃±5℃
2.t=1000 hrs (-24hrs, +72hrs)
JIS C 7021: B-12
High Temperature
High Humidity
Storage Test
1.Ta=65 ℃±5℃
2.RH=90 %~95%
3.t=1000hrs ±2hrs
Endurance
Test
Thermal Shock Test
Solderability Test
Environmental
Test
Temperature
Cycling
IR Reflow
1.Ta=105 ℃±5 ℃&-40 ℃±5 ℃
(10min)
(10min)
2.total 10 cycles
1.T.Sol=235 ℃±5℃
2.Immersion time 2 ±0.5sec
3.Coverage ≧95% of the dipped surface
1.105 ℃ ~ 25℃ ~ - 55℃ ~ 25℃
30mins 5mins 30mins 5mins
2.10 Cyeles
1.T=260¢XC Max. 10sec.Max.
2. 6 Min
MIL-STD-202F:103B
JIS C 7021: B-11
MIL-STD-202F: 107D
MIL-STD-750D: 1051
MIL-STD-883D: 1011
MIL-STD-202F: 208D
MIL-STD-750D: 2026
MIL-STD-883D: 2003
IEC 68 Part 2-20
JIS C 7021: A-2
MIL-STD-202F: 107D
MIL-STD-750D: 1051
MIL-STD-883D: 1010
JIS C 7021: A-4
MIL-STD-750D:2031.2
J-STD-020