CAR2024FP Series 2000 Watt 24V Front End Power Supply Features: ∎ Compact 1U Profile ∎ Output voltage and power optimal for Industrial, Wireless Base Stations, and RF Amplifiers ∎ Constant Current Characteristic ∎ N+1 Redundancy ∎ High Power Density (21W/in3) ∎ 3.3VSB, Active Load Sharing, I²C and PMBus digital communication ∎ Remote On/Off and Remote Sense functions FEATURES High Power Density 21W/in3 Load Sharing & Fault Tolerant Automatic Fan Speed Control System Scalability up to 8kW Universal Input & International Certifications BENEFITS More system space for application circuits and hardware Excellent reliability in N+1 operation Reduces audible noise and increases reliability Allows flexibility with minimum investment Reduces logistical costs SPECIFICATIONS Input Voltage Range 2,000 Watt +24V Front End Power Supply 180-264 VAC, 47-63 Hz, derate to 1200W for 85~180 VAC Input Input Current Maximum 12.6A @ 180VAC / 14.3A @ 100VAC, Full Load (max) Inrush Current 50A max. cold start (per ETS 300 132-1 and Bellcore specifications) Input Protection Dual Fuse / 20 Amp / 250 VAC Power Factor 0.99 (Typical) Efficiency Up to 90.5% (see efficiency curve) Output Power 2000W at 28Vout, 1743W @ 21Vout Output Voltage Range 21 to 29 VDC with remote programming Output Current 83A @ 24Vout / 230VAC Operation Standby Bias Voltage 3.3VSB@1A (optional 5Vsb) Voltage Regulation ±2% of Vnom for any combination of line, load and temperature Output Ripple & Noise 1% (pk-pk) @ 20MHz with 0.1µF ceramic and 10µF Tantalum caps at the output Transient Response 5% max deviation Recovery time 300μs @ 50% load step and di/dt < 1A/μs Hold-Up Time 15ms at full load measured down to 20V with 230Vac Remote On/Off ON if >3V or open; OFF if <1V (max. sink 1mA) Open collector type Current Limit Protection Adjustable via I²C interface or PMBus, Constant current characteristic & power limited to 2000W (230VAC) Short Circuit Protection Self protected with auto recovery Over Voltage Protection Trip level >+31Vdc ± 1V, Reset condition by recycling the AC input or applying Remote ON/OFF Operating Temperature -10°C to +70°C. power derating above 50°C at 2.5%/°C Over Temperature Protection Non-Latching, thermal shutdown point is set for 125°C and recovery point is 110°C EMI FCC-B & EN55022-B with specified filter or at rack level, GR-1089-CORE LED Indicators LED Indicators to indicate AC OK, DC OK and other Fault Conditions Analog Status & Control Voltage Programming (V Prog), Load sharing (I Share), Remote On/Off, Current Monitor (I Monitor), AC OK, DC OK, Temperature Warning, Fault, PS Present, Module Enable, Digital Status & Control I2C and PMBus, see detailed specification for details Shock & Vibration NEBS GR-63-CORE Level 3 Dimensions 14.25 x 4.00 x 1.65” / 316.23 x 101.6 x 41.91mm Safety Approvals IEC/UL/CSA/EN60950-1, CE Mark (LVD) Options 5VSB Output, Bezel KEY MARKET SEGMENTS & APPLICATIONS ∎ Amplifier ∎ Industrial ∎ Wireless rev 100506 www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910 CAR2024FP Series 2000 Watt 24V Front End Power Supply OUTLINE DRAWING All Dimensions in Inches (mm) Tolerance: .XX = ± .02 in (.50 mm) .XXX = ± .010 in (.254 mm) Efficiency 110% 90% 84% 90% 87% 91% 90% 73% 70% 50% 10% 20% 30% 50% 80% 100% Load LED INDICATOR TEST CONDITION 1 NORMAL OPERATION 2 LOW/ or NO AC Input 3 OVP 4 OVER CURRENT 5 THERMO ALARM 6 Fault Over Temperature 7 Remote ON/OFF PART NUMBER DEFINITION GUIDE: CONNECTOR DRAWING: F=Front End Type P=Positive Polarity Examples: CAR2024FPBZ0-1A 2000W/24V Front End, Bezel, 6 of 6 RoHS CAR2024FPZ0-1A 2000W/24V Front End, 6 of 6 RoHS 84% 73% MONITORING SIGNAL* FAULT FAULT DC OK AC OK TEMP OK OFF High High High High Red Low Low Low High Red Low Low High High Red Low Low High High OFF High High High Low Red 90% Low Low High Low 91% 90% 87% Red Low Low High High 70% 2 10% 3 4 20% 5 30% 6 A#3 A#2 A#1 C 50% 80% 100% Load D B#1 B#2 B#3 B#4 B#5 B#6 B Rev. Blank=Non-compliant YO=5 of 6 Compliant ZO=6 of 6 Compliant RoHS B=Bezel Option Blank=None Options DC OK Green OFF OFF OFF Green 110% OFF 90% OFF 50% 1 CAR 20 24 F P x xx -1A Series 20=2000W Output Current 24=24V Output Voltage AC OK Green OFF Green Green Green Green Green Efficiency EFFICIENCY CURVE: A Output Connector: Mating Connector: Molex P/N 87663-4002 Molex P/N 87664-2001 Pin A1 A2 A3 A4 A5 A6 Functions VSB [3.3V] PS Present Signal Return Write Protect Remote Sense (+) Remote Sense (-) Pin C1 C2 C3 C4 C5 C6 Functions I Share N/C Temp OK I2C Address (A0) I2C Address (A1) I2C Address (A2) Pin Functions Pin D1 D2 D3 D4 D5 D6 Functions V Prog OVP Test Point Remote ON/OFF DC OK AC OK Interrupt B1 B2 B3 B4 B5 B6 Fault I Monitor Module Enable VSB [3.3V] Return SDA SCL rev 100506 Pin Blades A#3 Ground A#2 Neutral A#1 Line B#1 +V B#2 +V B#3 +V B#4 Return B#5 Return B#6 Return www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910