EPS-65 65W Single Output Switching Power Supply series Features : ry Universal AC input / Full range Optional L-Bracket and cover High efficiency up to 90% Protections: Short circuit / Overload / Over voltage Cooling by free air convection 2" 4" compact size LED indicator for power on =Blank,C ; Blank=PCB only, C=Enclosed type EPS-65-3.3 C SPECIFICATION MODEL EPS-65-12 EPS-65-15 EPS-65-24 EPS-65-36 EPS-65-48 36V 48V DC VOLTAGE 3.3V 5V 7.5V 15V 24V RATED CURRENT 11A 11A 8A 5.42A 4.34A 2.71A 1.81A 1.36A CURRENT RANGE 0 ~ 12A 0 ~ 12A 0 ~ 8.8A 0 ~ 6A 0 ~ 4.8A 0 ~ 3A 0 ~ 2A 0 ~ 1.5A RATED POWER 36.3W 55W 60W 65.04W 65.1W 65.04W 65.16W 65.28W Note.6 39.6W 60W 66W 72W 72W 72W 72W 72W 80mVp-p 100mVp-p 120mVp-p 150mVp-p 240mVp-p 280mVp-p 300mVp-p 21.6 ~ 27V 1.0% 32.4 ~ 39.6V 1.0% 43.2 ~ 52.8V 1.0% VOLTAGE ADJ. RANGE mi RIPPLE & NOISE (max.) Note.2 80mVp-p 4.75 ~ 5.5V 2.0% 3.1 ~ 3.6V VOLTAGE TOLERANCE Note.3 3.0% 7.13 ~ 8.25V 2.0% 10.8 ~ 13.5V 2.0% 13.5 ~ 16.5V 2.0% LINE REGULATION 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% LOAD REGULATION 2.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load 50ms/230VAC 16ms/115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE Note.5 90 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.8A/115VAC LEAKAGE CURRENT 127 ~ 370VDC 82% 87% 84% 88% 89% OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION 89% 90% 39.7 ~ 46.8V 53.3 ~ 64.8V 1 A/230VAC COLD START 60A/230VAC <1mA/240VAC 115 ~ 150% rated output power eli OVER LOAD PROTECTION EPS-65-7.5 12V SETUP, RISE TIME INPUT EPS-65-5 EPS-65-3.3 PEAK LOAD(10sec.) OUTPUT na No load power consumption<0.3W 3 years warranty Protection type : Hiccup mode, recovers automatically after fault condition is removed 3.7 ~ 4.45V 5.6 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +70 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS WITHSTAND VOLTAGE UL60950-1, TUV EN60950-1 approved HARMONIC CURRENT Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, heavy industry level, criteria A I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Pr (Note 4) EMS IMMUNITY MTBF OTHERS DIMENSION PACKING NOTE Khrs min. MIL-HDBK-217F (25 ) PCB:101.6*50.8*28mm (L*W*H) ; with optional CASE:103.4*62*37mm (L*W*H) PCB: Kg; 96pcs/ Kg/0.89CUFT ; with optional CASE: Kg; 45pcs/ Kg/0.67CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltage. Please check the static characteristics for more details. 6. 33% Duty cycle maximum within every 30 seconds. Average output power should not exceed the rated power. File Name:EPS-65-SPEC 2011-04-08 EPS-65 65W Single Output Switching Power Supply Mechanical Specification ry Unit:mm 101.6 3.175 95.25 Optional cover: No.998A -T 3.175 HS2 3 2 1 AC FUSE T2.5A/250V SVR1 1 2 3 4 na 50.8 44.45 FS1 series CN1 CN2 HS1 mi 3 max. 28 4- 3.3 Mylar film 1.HS1,HS2 can not be shorted. 2.HS1 must have safety isolation distance with system case. AC Input Connector (CN1) : JST B3P-VH or equivalent Mating Housing JST VHR or equivalent Terminal JST SVH-21T-P1.1 or equivalent 4.2 Optional L-Bracket: No.998A -D 12. DC Output Connector (CN2) : JST B4P-VH or equivalent Assignment -V +V Mating Housing Terminal JST VHR or equivalent JST SVH-21T-P1.1 or equivalent eli Pin No. 1,2 3,4 7 2-M 2-M 95 3L =4 3 78 2- 2-M 10 3.4 3L 3.5 37 Assignment AC/N No Pin AC/L 18 14.5 Pin No. 1 2 3 =4 55 24 30.8 .2 5 62 Block Diagram EMI FILTER & RECTIFIER Pr I/P PFC CIRCUIT POWER SWITCHING fosc : 100KHz RECTIFIERS & FILTER +V -V DETECTION CIRCUIT FG O.L.P. CONTROL O.V.P. File Name:EPS-65-SPEC 2011-04-08 EPS-65 65W Single Output Switching Power Supply ry Static Characteristics Output Derating 100 100 PCB only 90 80 80 70 Enclosed type 50 LOAD (%) 40 20 0 10 20 30 40 50 50 70 (HORIZONTAL) 40 90 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (V) 60Hz Pr eli mi AMBIENT TEMPERATURE ( ) 60 60 na LOAD (%) 60 -30 series File Name:EPS-65-SPEC 2011-04-08