185W Multiple Channel Output Switching Power Supply L D V- 1 8 5 series Features : 180~305VAC input range Multiple channel with constant current output Meet 4KV surge immunity level(EN61000-4-5) Protections: Short circuit / Overload / Over voltage / Over temperature Built-in active PFC function Cooling by free air convection IP67 design for indoor or outdoor installations Optional timer dimming function High efficiency up to 88.5% -40 can power on Suitable for LED lighting and moving sign applications 3 years warranty IP67 LDV-185-350A Blank : IP67 rated. No timer dimming function. D: IP67 rated. Built in timer dimming function,contact MEAN WELL for details. SPECIFICATION MODEL SINGELE CHANNEL RATED CURRENT OUTPUT LDV-185-350A LDV-185-350B LDV-185-350C LDV-185-700A LDV-185-700B LDV-185-700C 350mA 350mA 350mA 700mA 700mA 700mA 32 ~ 38V DC VOLTAGE RANGE RATED POWER(max.) Note 3. 159.6W MAX CHANNEL Note 3 12CH SETUP, RISE TIME Note 2. 37 ~ 43V 42 ~ 51V 32~38V 37~43V 42~51V 180.6W 12CH 182W 12CH 159.6W 6CH 180.6W 6CH 182W 6CH 47~50V 54~63V 2500ms, 50ms HOLD UP TIME 10ms / 230VAC CONSTANT CURRENT ACCURACY 5% VOLTAGE RANGE 180~ 305VAC 47 ~ 63Hz FREQUENCY RANGE INPUT POWER FACTOR EFFICIENCY (Typ.) Note 4. PF>0.95/230VAC 88.5% PF 0.9 at 75 ~ 100% load AC CURRENT INRUSH CURRENT(max.) 1.5A/230VAC LEAKAGE CURRENT <0.75mA / 240VAC Channel shut down when each channel fault, re-power on to recovery SHORT CIRCUIT COLD START 60A/230VAC OVER VOLTAGE 54 ~ 63V 41 ~ 50V 47 ~ 50V 41~50V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE 100 10 (RTH2) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down OTP DIMMING When the NTC (RTH3) temperature is higher than 95 WORKING TEMP. -30 ~ +70 (Refer to output load derating curve),-40 20 ~ 95% RH non-condensing PROTECTION WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION PSU will enter dimming mode with decreasing output Io can power on -40 ~ +80 , 10 ~ 95% RH 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS IP67 approved; Design refer to EN61347-1,EN61347-2-13,UL8750 WITHSTAND VOLTAGE I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC 1minute I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55015 Class B EMC Compliance to EN61000-3-2 Class C ( 75% load) ; EN61000-3-3 HARMONIC CURRENT Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level (surge 4KV), criteria A EMS IMMUNITY OTHERS MTBF DIMENSION PACKING NOTE Khrs min. MIL-HDBK-217F (25 ) 222.2*90*38.8mm (L*W*H) 1.27 Kg; 12pcs/16.2Kg/1.02CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 3. Please do not beyond rated power when choosing channel quantity. 4. Efficiency is measured under 230VAC input with Pout>120W and each output channel connecting with the same quantity of LEDs(similar Vf sum). 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. File Name:LDV-185-SPEC 2011-03-18 185W Multiple Channel Output Switching Power Supply L D V- 1 8 5 Mechanical Specification Case No. series Unit:mm 222.2 198.2 12 9.6 10 150 20 1 300 20 9 10 12 AC/L(Brown) AC/N(Blue) FG (Green/Yellow) 11 6 22AWG 12C 150 20 90 55 5 2 10 11 1 18AWG(0.75mm ) 3C 15 12 13 14 6 38.8 10 22AWG 13C 4.2 4PL WATERPROOF CONNECTION O/P Connection O/P cable 2 AC source Male Connection(option) 300 20 LDV-185 I/P O/P cable 1 LED ARRAY NOTE: Cable 1 and 2 for 350mA models, Cable 1 for 700mA models Option for male connection(Contact MEAN WELL for details) O/P Connection Cable Pin Configuration(female) 1 9 10 11 1 2 Cable 1 11 6 12 5 3 5 8 7 14 13 4 7~12 LED- for each channel 1~6 LED+ 7~12 LED- for each channel 13~14 NC 1 10 2 7 3 12 4 11 6 5 9 15 12 9 8 12Pin 7 Pin Configuration(male) LED+ 8 3 4 Pin definition 1~6 10 2 Cable 2 Pin 6 15Pin 1 11 10 15 -V 9 12 15 8 6 3 4 13 14 7 2 5 Pin Definition 1 2 3 4 5 6 7 8 9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 LED+ LED- LED+ LED- Wire Color Wire Stock GRAY BLUE YELLOW/GREEN 22AWG*12C ORANGE YELLOW PURPLE CLEAR LUCITE WHITE/BLACK BLACK GREEN RED WHITE BLUE PURPLE ORANGE YELLOW RED WHITE WHITE/RED 24AWG*15C BROWN WHITE/ORANGE GRAY CLEAR LUCITE/BLUE CLEAR LUCITE/PURPLE NC -V WHITE/YELLOW File Name:LVD-185-SPEC 2011-03-18 L D V- 1 8 5 185W Multiple Channel Output Switching Power Supply series Block Diagram Fosc : 100KHz EMI FILTER & RECTIFIERS I/P PFC CIRCUIT RECTIFIERS & FILTER POWER SWITCHING LED+ LED DRIVER O.L.P. -V O.T.P. FG O.L.P. DETECTION CIRCUIT PWM CONTROL PFC CONTROL LED- O.V.P. Derating Curve Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -30 -25 -5 0 15 30 AMBIENT TEMPERATURE ( 50 ) 60 70 (HORIZONTAL) 60 50 40 180 200 210 220 230 240 250 260 270 280 290 305 INPUT VOLTAGE (V) 60Hz File Name:LDV-185-SPEC 2011-03-18