Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8824379104 Item: BE24-3A79-PHI Coil Data at 20 °C Conditions Min Typ Max Unit Conditions Min Typ Max Unit Coil resistance Coil voltage Rated power Pull-In voltage Drop-Out voltage Contact data 79 Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage (20-25 AT) Operate time incl. bounce Release time Special Product Data Number of contacts Contact - form Insulation resistance Coil/Contact Insulation voltage Coil/Contact Housing material Connection pins Environmental data Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC !"# $ % Start Value & ' #$# ' RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ( ! ! Conditions Min Typ Max Unit 3 A - NO RH <45%, 200 VDC test voltage according to IEC 255-5 ( ) Polycarbonat Copper alloy tin plated Conditions Min Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Max Unit * * + + , , wave soldering max. 5 sec. fully sealed Modifications in the sense of technical progress are reserved Designed at: 10.03.06 Designed by: WKOVACS Approval at: Last Change at: 10.03.06 Last Change by: WKOVACS Approval at: 10.03.06 Approval by: Approval by: RUDI RIPPL Version: 01