Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3215190151 Item: DIP15-1C90-51D Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Coil current Thermal resistance Inductance Pull-In voltage Drop-Out voltage = Min Typ Max Unit Max Unit operating temperature + self heating ! Conditions Contact data 90 Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time, incl. bounce Release time Capacity Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Capacity Coil/Contact Case colour Housing material Connection pins Magnetic Shield Reach / RoHS conformity Approval Approval Min Typ " #$ %&" &$" $' ( not to exceed their individual max.'s DC or Peak AC/ with 40% overdrive DC or Peak AC/with 40% overdrive DC or Peak AC/ with 40% overdrive ) * + ,& Start Value ! - $. + &. RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch / 0 * * 1 Conditions Min Typ Max Unit 1 Form C - Changeover according to IEC 255-5 RH <45%, 200 VDC test voltage @ 10 kHz 0 / 1 black mineral filled epoxy CuFe2P tin plated no yes UL File No. NRNT2.E156887 UL File No. NRNT8.E156887 Modifications in the sense of technical progress are reserved Designed at: 28.04.04 Designed by: SCHELLHORN Approval at: 21.08.09 Approval by: KOLBRICH Last Change at: 28.10.09 Last Change by: SERVICES_EUROPE Approval at: 02.11.09 Approval by: KOLBRICH Version: 2 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 3215190151 Item: DIP15-1C90-51D Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min Max 4 4 wave soldering max. 5 sec. 5 Unit 2 2 3 3 3 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max Tube per 25 piece Unit 2 Modifications in the sense of technical progress are reserved Designed at: 28.04.04 Designed by: SCHELLHORN Approval at: 21.08.09 Approval by: KOLBRICH Last Change at: 28.10.09 Last Change by: SERVICES_EUROPE Approval at: 02.11.09 Approval by: KOLBRICH Version: 2