Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8412169002 Item: HM12-1A69-02 Conditions Coil Data at 20 °C Coil resistance Coil voltage Rated power Thermal resistance Pull-In voltage Drop-Out voltage = Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacitance Special Product Data Number of contacts Contact - form Dielectric Strength Coil/Contact Insulation resistance Coil/Contact Case colour Housing material Sealing compound Connection pins Reach / RoHS conformity Remark Typ Max Unit Min Typ Max Unit operating temperature + self heating Conditions Contact data 69 Min ! "# #! !$ % not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC & ' ( )# Start Value * !+ ( #+ RH <45 %, 100 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch , . ' ' / Max Unit .0 Conditions Min Typ 1 A - NO according to IEC 255-5 RH <45%, 200 VDC test voltage , gray Polycarbonat Polyurethan Copper alloy tin plated yes High voltage relay for PCB-mounting (02=PIN OUT) Modifications in the sense of technical progress are reserved Designed at: 07.04.04 Designed by: EBUNKE Approval at: 19.02.09 Approval by: DSTASTNY Last Change at: 08.04.11 Last Change by: BECHTLE Approval at: 08.04.11 Approval by: CRUF Version: 05 Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8412169002 Item: HM12-1A69-02 Environmental data Shock Vibration Operating temperature Storage temperature Soldering temperature Washability Conditions Min 4 4 wave soldering max. 5 sec. Max 3 0 Unit 1 1 2 2 2 fully sealed Conditions General data Typ 1/2 sine wave duration 11ms from 10 - 2000 Hz Min Total weigth Packaging Typ Max Unit 1 HM-rlay box 10 pos. with spacing paper (9999999920) Modifications in the sense of technical progress are reserved Designed at: 07.04.04 Designed by: EBUNKE Approval at: 19.02.09 Approval by: DSTASTNY Last Change at: 08.04.11 Last Change by: BECHTLE Approval at: 08.04.11 Approval by: CRUF Version: 05