Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2116614501 Item: KSK-1E66/1-BV14501 Magnetic properties Pull-In excitation (Reference value) Hysteresis (Reference value) Test-Coil Conditions Min Contact-No. Contact-form Contact-material Contact rating Switching voltage Switching current Carry current Contact resistance static Contact resistance dynamic Insulation resistance Breakdown voltage (>20 AT) Operate time incl. bounce Release time Environmental data Remarks 1. Shock Vibration Ambient temperature Storage temperature Soldering temperature Max Unit Max Unit measured in coil- "define operation" measured in coil- "define operation" Reed switch unmodified KMS-01 Conditions Contact data 66/1 Typ Min Typ 66/1 E - bistable NO Rhodium not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC " # $ % & # #& Start Value " ( & ) # ( Start Value ! ' RH <45 %, 200 V test voltage according to IEC 255-5 measured with 40% overdrive measured with no coil excitation ' + Conditions Min 1/2 sine, duration 11ms, in 3 axis from 10 - 2000 Hz ! *! Typ Max Unit magnetic latching cont. with internal AlNiCo magn. , ' , ' - wave soldering max. 5 sec. Conditions General data Min Remarks 3. Remarks 4. Typ Max Unit Do not mount around ferromagnetic materials. Do not cut or bend the switch leads. Modifications in the sense of technical progress are reserved Designed at: Last Change at: 15.09.10 Designed by: Last Change by: WKOVACS Approval at: Approval at: 16.09.10 Approval by: Approval by: TFRITSCHI Version: 01