Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 2224903054 Item: MK02/4-1C90C-500W Magnetic properties Pull in Test equipment Conditions Min Typ at 20°C Special Product Data Contact - form Contact rating operating voltage operating ampere Switching current Sensor-resistance Housing material Case color Sealing compound Max Unit Max Unit KMS - 11 Conditions Min Typ Form C - Changeover not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ! " # $ Sensor deactivated $ PBT glass fibre reinforced blue Polyurethan Environmental data Conditions Min Operating temperature Operating temperature Storage temperature cable not moved cable moved '( ' '( Cable specification Conditions Min Cable typ Cable material Cross section Typ Max & & & Typ Unit % % % Max Unit Max Unit round cable PVC 0,14 qmm Conditions General data Mounting advice Mounting advice Mounting advice tightening torque Min Typ over 5m cable, a series resistor is recommended. The mounting of MK02/4 on iron is not allowed. Magnetically conductive screws must not be used. ) * ! +( ,* Disk ISO 7089 Modifications in the sense of technical progress are reserved Designed at: 07.03.08 Designed by: ALICHTENSTEIN Approval at: Last Change at: 18.08.09 Last Change by: KSCHIELENSKI Approval at: 18.02.11 Approval by: Approval by: TFRITSCHI Version: 03