Europe: +49 / 7731 8399 0 | Email: [email protected] Item No.: USA: +1 / 508 295 0771 | Email: [email protected] Asia: +852 / 2955 1682 | Email: [email protected] 8705271200 Item: MRX05-2A71 Conditions Coil Data at 20 °C Coil resistance Inductance Coil voltage Rated power Thermal resistance Pull-In voltage Drop-Out voltage = Special Product Data Contact-form Contact rating Switching voltage Switching current Carry current Contact resistance static Insulation resistance Breakdown voltage Operate time incl. bounce Release time Capacity Environmental data Insulation resistance Coil/Contact Insulation voltage Coil/Contact Shock Vibration Ambient temperature Storage temperature Soldering temperature Cleaning Housing material Sealing compound Remarks Remarks 1. Remarks 2. Min Typ Min Typ Max Unit Max Unit operating temperature + self heating Conditions A !" #$ $" "% & not to exceed their individual max.'s DC or Peak AC DC or Peak AC DC or Peak AC ' ( ) *$ Start Value + , "- ) $- RH <45 %, 200 V test voltage . measured with 40% overdrive measured with no coil excitation @ 10 kHz across open switch ( ( / Conditions Min Typ RH <45%, 200 VDC test voltage according to IEC 255-5 1/2 sine wave duration 11ms from 10 - 2000 Hz wave sodering max. 5 sec. Max Unit . 0 1 1 2 2 2 3 3+ 4 fully sealed Plastics / Polyamid Polyurethan Reed-Relay to be used for the galvanic separation of intrinsically safe and non-intrinsically safe circuits with Ex-approval by PTB 01 ATEX 2050 U. Modifications in the sense of technical progress are reserved Designed at: 16.01.08 Designed by: WKOVACS Approval at: 28.01.08 Approval by: KOLBRICH Last Change at: 14.07.08 Last Change by: ALICHTENSTEIN Approval at: 22.07.08 Approval by: KOLBRICH Version: 05