DML-2B-10G DOUBLE BALANCED MIXER 2 to 18 GHz / +7 to 10 dBm LO / Low Conv. Loss / Wideband IF / Hermetic Pkg with Removable SMA PRINCIPAL SPECIFICATIONS RF/LO LO Drive IF Conversion Isolation, Model Frequency, Range, Range, Loss, SSB, dB, L-R, dB, Number GHz dBm, Nom. GHz Max. Typ. Min. Typ. DML-2B-10G 3 - 18 +7 to +10 DC - 1 1 - 1.5 8.5 9.0 5.5 6.5 1.5 - 2 10.0 7.5 20 40 Isolation, L-X, dB, Min. Typ. 18 30 Isolation, R-X, dB, Min. Typ. 18 30 VSWR Typ. LO RF 2.0:1 2.0:1 All specifications are as measured in a 50system, at nominal LO Power, in a down converter application. Package Outline NOTES: 1. Tolerance on 3 place decimals ±.010(.25) except as noted. 2. Dimensions in inches over mm. 23Feb96 General Notes: 1. The DML-2B-10G Double Balanced Mixer covers the frequency range of 2 to 18 GHz and is optimized for low loss and broad RF/LO bandwidth. The hermetic removable SMA package is used for performance testing and reliability. 2. Merrimac offers a broad selection of Double Balanced Mixers ideal for a variety of signal processing functions from 20 kHz to 20 GHz and for applications from routine to very special. 3. All Merrimac mixers comply with MIL-M-28837 and may be supplied screened for compliance with additional specifications for military and space applications requiring the highest reliability. GENERAL SPECIFICATIONS Third Order Input Intercept: +13 dBm typ. Noise Figure: Within ±1 dB of Conversion Loss 1 dB Compression Point: 0 dBm min. (Referenced to Input) 1 dB Desensitization Point: – 2 dBm min. (Referenced to Input) Polarity Sense: DC Offset Voltage: Weight with SMA, nom: Operating Temperature: Positive 5 mV typ. 0.7 oz (20 g) – 55° to +85°C For further information contact: MERRIMAC / 41 Fairfield Pl., West Caldwell, NJ, 07006 / 973-575-1300 / FAX 973-575-0531