IQ-MCM-1.9G I&Q DETECTOR PRELIMINARY SIMULATED DATA REV: 002, 05/22/02 MULTI-MIX PICO™ COMPONENTS MOUNTED ON MERRIMAC BOARD • PRE-MOUNTED AND PRE-TESTED • 1.7 - 2.0 GHz • 0.65 dB AMPLITUDE BALANCE • 90 ± 3.5 DEGREE PHASE BALANCE • LOW LOSS • SURFACE MOUNT AND CONNECTORIZED GENERAL SPECIFICATIONS LO power : +16dBm +/- 1dB Parameter Specification Frequency Range, RF & LO 1.7 – 2.0 GHz I, Q Bandwidth DC – 300 MHz LO, RF, I, Q Impedance 50 ohms Conversion Loss -14.5 dB Input 1dB Compression Point +13 dBm IIP3 +21dBm IF, RF, LO VSWR 2.0 : 1 Isolation RF to I, Q 14 dB Isolation LO to I, Q 30 dB Isolation LO to RF 40 dB Amplitude Balance +/- 0.65 dB Phase Balance +/- 3.5 Size / Outline 0.80 x 0.80 inches RF Interface Surface Mount / removable SMA Operating Temperature Range -55 to 85, C SIMULATED PERFORMANCE CHARTS Phase Balance Amplitude Balance Phase (Degreee) Magnitude (dB) 1.0 0.8 0.6 0.4 0.2 0.0 -0.2 -0.4 -0.6 -0.8 3.5 2.5 1.5 0.5 -0.5 -1.5 -2.5 -3.5 -4.5 -1.0 1.70 4.5 1.75 1.80 1.85 1.90 Frequency (GHz) 1.95 2.00 1.70 1.75 1.80 1.85 1.90 1.95 Frequency (GHz) THE MULTI-MIX MICROTECHNOLOGY® GROUP IS ISO-9001 REGISTERED U.S. patent 6,099,677 and other patents pending Merrimac Industries / 41 Fairfield Place, West Caldwell, NJ 07006 Tel: 1.888.434.MMFM / Fax: 973.882.5990 / Email: [email protected] / www.Multi-Mix.com 2.00