NJU6398 LVDS-output Quartz Crystal Oscillator IC !GENERAL DESCRIPTION The NJU6398 is a quartz crystal oscillator IC with LVDS output, from 110MHz to 160MHz frequency output, which consists of an oscillation amplifier, LVDS output, and 3-state output buffer for each LVDS. The oscillation amplifier realizes very low oscillation stop current with NAND circuit. The NJU6398 is suitable for mobile, optical communications (including WDM system), PC & Peripherals, telecommunications, LAN/WAN, and wireless systems !PACKAGE OUTLINE ! FEATURES "Operating Voltage 2.7 to 3.6V "Oscillation Frequency 110MHz to 160MHz "Output Level LVDS "Oscillation Stop and Output Stand-by Function "3-State Output Buffer "Oscillation Capacitors Cg and Cd on-Die "Package Outline Thin-Die "C-MOS Technology !PAD LOCATION NJU6398C-D Thin-Chip CONT VDD XT FOUTB FOUTA XT VSS !COORDINATES No 1 Pad Name CONT X -578.2 Y 688 2 3 XT XT -578.2 -578.2 405 -535.7 4 5 6 7 VSS FOUTA FOUTB VDD -578.2 609 609 609 -689.7 -476.7 105.6 706 Starting Point:Die Center Die Size:1.55x1.70mm Die Thickness(-D):200±20um Pad Size:90x90um Note1) Substrate: VSS level Unit[um] !BLOCK DIAGRAM XT VDD Rf VSS XT C Cd FOUTA FOUTB CONT 2011/02/24 ( 1 / 7 ) NJU6398 !TERMINAL DESCRIPTION SYMBOL FUNCTION Oscillation and 3-state Output Buffer Control FOUT CONT CONT H or OPEN Output frequency f0 L Oscillation Stop and High impedance Output XT XT VSS FOUTA FOUTB VDD Quartz Crystal Connecting Terminals VSS=0V LVDS Output, Differential output pair VDD=3.3V !ABSOLUTE MAXIMUM RATINGS (Ta=25°C) PARAMETER SYMBOL RATING UNIT Supply Voltage VDD -0.5 to +7.0 V Input Voltage VIN VSS-0.5 to VDD+0.5 V Output Voltage VO -0.5 to VDD+0.5 V Input Current IIN mA ±10 Output Current IO mA ±25 Operating Temperature Range Topr -40 to +85 °C Storage Temperature Range Tstg -55 to +125 °C Note2) If the supply voltage(VDD) is less than 7.0V, the input voltage do not over the VDD level. Note3) Decupling capacitor should be connected between VDD and VSS due to the stabilized operation for the circuit. 2011/02/24 ( 2 / 7 ) NJU6398 !ELECTRICAL CHARACTERISTICS PARAMETER Operating Voltage SYMBOL VDD PARAMETER SYMBOL Operating Current Oscillation Stopping Current Stand-by Current IDD1 Input Voltage Input Current Output Off Leakage Current Feedback Resistance Internal Capacitor Maximum Oscillation Frequency Output Signal Symmetry Differential Output Voltage ∆ Differential Output Voltage Offset Voltage ∆ Offset Voltage Output Short Current 1 Output Short Current 2 IDD2 Ist VIH VIL IIN IOZ Rf Cg/Cd CONDITIONS MIN 2.7 CONDITIONS MIN fosc=155MHz,CL=5pF CONT=VSS, No load CONT=XT=VSS, No load (Ta=25°C) MAX UNIT 3.6 V TYP (VDD=3.3V,Ta=25°C) CIRMAX UNIT CUIT 40 mA 1 27 2.5 5 uA 15.0 2.3 1 3.3 0.99 20.0 3.5 uA V V uA uA ±1 uA Note4) 2.31 0 CONT=0.8VDD CONT=0.2VDD CONT=VSS, FOUTA and FOUTB =VDD CONT=VSS, FOUTA and FOUTB =VSS 1.93 9/14 fosc=155MHz kΩ pF 160 fMAX SYM TYP FOUTA − FOUTB, CL=5pF, RL=100Ω @1/2VOD, Hi side |VOD| 45 50 55 % 1 250 350 450 mV 2 2 35 mV 2 1.25 2 1.375 25 V mV 3 3 24 mA 4 12 mA 5 ±150 mVp-p 6 0.3 1.5 ns 1 0.3 1.5 ns 1 100 100 ns ns 8 8 ∆VOD VOS ∆VOS IOS 1.125 (SHORT) IOSD (SHORT) Differential Output VOR Ripple Output Signal Rise RL=100Ω, CL=5pF tr Time 0.2VOD to 0.8VOD Output Signal Fall RL=100Ω, CL=5pF tf Time 0.8VOD to 0.2VOD Output Disable Time tPLZ CL=5pF,RUP=10kΩ Output Enable Time tPZL CL=5pF,RUP=10kΩ Note4) Excluding input current on CONT Terminal. Note5) Design guarantee. MHz Note5) 2011/02/24 ( 3 / 7 ) NJU6398 !MEASUREMENT CIRCUITS (1) Operating Current / Output Signal Symmetry / Output Signal Rise / Fall Time 3.3V 0.1uF 0.001uF VDD XT CL=5pF X’tal RL=100Ω XT FOUTB CL=5pF (2) Differential Output Voltage 3.3V 0.1uF 0.001uF FOUTA XT VDD or VSS RL=100Ω FOUTB VSS (3) Offset Voltage 3.3V 0.1uF 0.001uF VDD XT FOUTA RL=50Ω VDD or VSS RL=50Ω VSS FOUTB V 2011/02/24 ( 4 / 7 ) NJU6398 (4) Output Short Current 1 3.3V 0.1uF 0.001uF VDD XT FOUTA IosA FOUTB IosB VDD or VSS VSS (5) Output Short Current 2 3.3V 0.1uF 0.001uF VDD FOUTA XT VDD or VSS IosD FOUTB VSS (6) Differential Output Ripple 3.3V 0.1uF 0.001uF VDD XT FOUTA RL=50Ω X’tal RL=50Ω XT VSS FOUTB M 2011/02/24 ( 5 / 7 ) NJU6398 Output Signal Symmetry 1/2VOD H L VDIFFERENTIAL = FOUTA – FOUTB FOUTB 0V = VDIFFERENTIAL FOUTA 80% 50% tr tf 20% VOD FOUTA – FOUTB VOR VSS (7) FULL LOAD DC Test 3.3V 0.1uF 0.001uF VDD XT FOUTA RL=3.74kΩ VDD or VSS RL=100Ω VTEST V RL=3.74kΩ VSS FOUTB VTEST 0V to 2.4V 2011/02/24 ( 6 / 7 ) NJU6398 (8) Output Disable Time / Output Enable Time 3.3V 0.1uF 0.001uF RUP=10kΩ VDD FOUTA CL=10pF Pulse Generator CONT RUP=10kΩ XT VSS FOUTB CL=10pF CONT FOUT 0.8VDD 0.2VDD tPZL tPLZ VOH VOL [CAUTION] The specifications on this data book are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this data book are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. 2011/02/24 ( 7 / 7 )