Wiki Article
SPRABO4 – January 2012
AM335x Evaluation Module (EVM) Hardware User's Guide
..................................................................................................................... ARM MPU Applications
This article describes the hardware architecture of the AM335x evaluation module (EVM)
(TMDXEVM3358), which is based on the Texas Instruments AM335x processor. This EVM is commonly
known as the AM335x general purpose (GP) EVM.
The AM335x general purpose EVM is a standalone test, development, and evaluation module system that
enables developers to write software and develop hardware around an AM335x processor subsystem.
The main elements of the AM335x subsystem are already available on the base board of the EVM, which
gives developers the basic resources needed for most general purpose type projects that encompass the
AM335x as the main processor. Additional typical type peripherals are built into the EVM such as memory,
sensors, LCD, Ethernet PHY, etc. so that prospective systems can be modeled quickly without significant
additional hardware resources.
This article has been contributed to the TI Embedded Processors Wiki. To see the most recently updated
version or to contribute, visit this topic at:
All trademarks are property of their respective owners.
SPRABO4 – January 2012
Submit Documentation Feedback
AM335x Evaluation Module (EVM) Hardware User's Guide
Copyright © 2012, Texas Instruments Incorporated
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Automotive and Transportation www.ti.com/automotive
Communications and Telecom www.ti.com/communications
Data Converters
Computers and Peripherals
DLP® Products
Consumer Electronics
Energy and Lighting
Clocks and Timers
Power Mgmt
Space, Avionics and Defense
Video and Imaging
OMAP Mobile Processors
Wireless Connectivity
TI E2E Community Home Page
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated